rcIpBgpGeneralGroupRoutePolicyOut
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.8.101.1.23
Object
scalar
r/w
OctetString
Route policy name that will be applied to all routes which are sent out of this VRF instance.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.8.101.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcIpBgpGeneralGroup
- Siblings
- 26
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpBgpGeneralGroupLocalAs Local Autonomous system number | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.101.1.1 |
| rcIpBgpGeneralGroupAutoPeerRestart Enable the feature that automatically restarts the
connection to a BGP peer when the connection goes down. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.10 |
| rcIpBgpGeneralGroupAutoSummary Enable BGP to summarize networks based on class limlts
(Class A,B,C networks). | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.11 |
| rcIpBgpGeneralGroupSynchronization Enables and disables the router from accepting routes
from BGP peers without waiting for an update from the
IBGP. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.12 |
| rcIpBgpGeneralGroupMaxEqualcostRoutes Sets the number of maximum number of equal-cost routes
that can be stored in the routing table. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.101.1.13 |
| rcIpBgpGeneralGroupIbgpReportImportRoute Configure BGP to report imported routes to an interior
BGP peer. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.14 |
| rcIpBgpGeneralGroupAggregate | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.15 |
| rcIpBgpGeneralGroupFlapDampEnable Enabled or Disabled | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.16 |
| rcIpBgpGeneralGroupDebugMask value is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
… | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.101.1.17 |
| rcIpBgpGeneralGroupTrapEnable | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.18 |
| rcIpBgpGeneralGroupQuickStart Enable the flag to avoid flap penalty and trigger
the peer start event quickly | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.19 |
| rcIpBgpGeneralGroupAdminStatus Disable or Enable group administrative | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.2 |
| rcIpBgpGeneralGroupDeterministicMed Enable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
same autonomous system. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.20 |
| rcIpBgpGeneralGroupRouteRefresh Route Refresh for Bgp. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.21 |
| rcIpBgpGeneralGroupRoutePolicyIn Route Policy Name that will be applied to all routes which enter the VRF table. | scalar | OctetString | .1.3.6.1.4.1.2272.1.8.101.1.22 |
| rcIpBgpGeneralGroupDefaultInformationOriginateIpv6 allows the redistribution of default ipv6
network into BGP | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.1.24 |
| rcIpBgpGeneralGroupNewLocalAs Local Autonomous system number | scalar | OctetString | .1.3.6.1.4.1.2272.1.8.101.1.25 |
| rcIpBgpGeneralGroup4ByteAs 4 Byte As number enable | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.26 |
| rcIpBgpGeneralGroupAsDot As number in Dot format | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.27 |
| rcIpBgpGeneralGroupDefaultMetric The default-metric is used in conjunction with
the redistribute router configuration command to cause
the bgp routing protocol to use this metric as MED | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.101.1.3 |
| rcIpBgpGeneralGroupDefaultLocalPreference Default local preference attribute value to be used | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.101.1.4 |
| rcIpBgpGeneralGroupDefaultInformationOriginate allows the redistribution of network 0.0.0.0 into BGP | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.1.5 |
| rcIpBgpGeneralGroupBestPathMissingAsWorst Enable to consider a missing MED attribute in a path
as having a value of infinity, making the path without a
MED value the least desirable path. To return the router
to the defau… | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.6 |
| rcIpBgpGeneralGroupBestPathMedConfed To enable MED comparison among paths learned from
confederation peers. Disable to prevent considering
the MED attribute in comparing paths | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.7 |
| rcIpBgpGeneralGroupIgnoreIllegalRouterId Configures BGP to overlook an illegal router ID.
Enables or disable accepting a connection from a peer
that sends its open message with a router ID of 0. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.8 |
| rcIpBgpGeneralGroupAlwaysCompareMed Enable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
different autonomous systems. | scalar | EnableValue | .1.3.6.1.4.1.2272.1.8.101.1.9 |