rcChasFan

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.4.7
MIB view Table view

Object

node

No description available.

Context

MIB
RAPID-CITY-VSP
OID
.1.3.6.1.4.1.2272.1.4.7
Type
node
Parent
rcChassis
Siblings
26
Children
2

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcChasType
Chassis Type
scalarEnumeration.1.3.6.1.4.1.2272.1.4.1
rcPortnode-.1.3.6.1.4.1.2272.1.4.10
rcPortLocknode-.1.3.6.1.4.1.2272.1.4.11
rcChasBrouterPorts
Used to indicate which ports in the system are configured as Brouter ports.
scalarPortSet.1.3.6.1.4.1.2272.1.4.17
rcChasSerialNumber
Unique serial number for this chassis.
scalarOctetString.1.3.6.1.4.1.2272.1.4.2
rcChasFtpDaemonInSecondaryCpu
Used to enable/disable FTP daemon in 2nd cpu.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.26
rcChasNewVlanOptmMode
Vlan Optimization mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.28
rcChasVlanOptmMode
Vlan Optimization mode the switch currently has booted and will remain the same until the next reboot.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.29
rcChasHardwareRevision
Device hardware revision level
scalarOctetString.1.3.6.1.4.1.2272.1.4.3
rcChasRspMode
This configuration is for enabling/disabling 256K mode. The change will take effect upon reboot.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.35
rcChasRspOperMode
R-mode the switch currently has booted and will remain the same until the next reboot.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.36
rcChasRspModeError
Used to indicate the r-mode error status
scalarEnumeration.1.3.6.1.4.1.2272.1.4.37
rcChasNumSlots
The number of slots in the chassis available for plug-in cards.
scalarInteger32.1.3.6.1.4.1.2272.1.4.4
rcChasNewMulticastResourceReservation
Used to reserve MGIDs for IP Multicast. The change will take effect upon reboot.
scalarInteger32.1.3.6.1.4.1.2272.1.4.44
rcChasMulticastResourceReservation
MGIDs the switch currently has reserved for IP Multicast; will remain the same until the next reboot.
scalarInteger32.1.3.6.1.4.1.2272.1.4.45
rcChasNewMaxVlanResourceReservation
A mode where all MGIDs are reserved for VLAN use only; no IPMC. The change will take effect upon reboot.
scalarEnableValue.1.3.6.1.4.1.2272.1.4.46
rcChasMaxVlanResourceReservation
Tells if all MGIDs are reserved for VLAN use. Will remain the same until the next reboot.
scalarEnableValue.1.3.6.1.4.1.2272.1.4.47
rcChasMgidUsageVlanCurrent
Number of MGIDs currently used for VLAN, including SMLT
scalarInteger32.1.3.6.1.4.1.2272.1.4.48
rcChasMgidUsageVlanRemaining
Number of MGIDs remaining allocated for VLAN
scalarInteger32.1.3.6.1.4.1.2272.1.4.49
rcChasNumPorts
The total number of ports currently installed in the chassis.
scalarInteger32.1.3.6.1.4.1.2272.1.4.5
rcChasMgidUsageMulticastCurrent
Number of MGIDs currently used for IPMC
scalarInteger32.1.3.6.1.4.1.2272.1.4.50
rcChasMgidUsageMulticastRemaining
Number of MGIDs remaining allocated for IPMC
scalarInteger32.1.3.6.1.4.1.2272.1.4.51
rcChasForceTopologyIpFlagEnable
Used to enable/disable flag which is used to set the CLIP-ip as topology ip
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.53
rcChasCircuitlessIpId
The Clip-Id set by the user to be used as Topology-ip. '0' means no circuitless IP id while '1..256' is valid circuitless Id
scalarInteger32.1.3.6.1.4.1.2272.1.4.54
rcChasPowerSupplynode-.1.3.6.1.4.1.2272.1.4.8
rcCardnode-.1.3.6.1.4.1.2272.1.4.9
Child Objects
ObjectTypeSyntaxOID
rcChasFanZoneTable
Table for the zones available on the chassis
table-.1.3.6.1.4.1.2272.1.4.7.2
rcChasFanInfoTable
This table contains information for all the fans on the chassis
table-.1.3.6.1.4.1.2272.1.4.7.3