raisecomMplsRsvpTELSPHoldingPriority
RAISECOM-MPLS-MIB ·
.1.3.6.1.4.1.8886.1.25.4.6
Object
scalar
obsolete
r/w
Integer32
The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less or equal (so higher or equal priority)
than the value of the holding priority object.
Note:This is rsvp-te global configuration.
Context
- MIB
- RAISECOM-MPLS-MIB
- OID
.1.3.6.1.4.1.8886.1.25.4.6- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Parent
- raisecomMplsRsvpTEObjects
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomMplsRsvpTEEnabled mandatory MPLS rsvp enable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.25.4.1 |
| raisecomMplsRsvpTEInterfaceTable mandatory The RSVP-specific attributes of the system's
interfaces. | table | - | .1.3.6.1.4.1.8886.1.25.4.10 |
| raisecomMplsRsvpTERefreshInterval mandatory The interval which is used to set the average
interval between refresh path and resv messages.
Note:This is rsvp-te global configuration. | scalar | RefreshInterval | .1.3.6.1.4.1.8886.1.25.4.2 |
| raisecomMplsRsvpTERefreshMultiple mandatory The RSVP value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have.
… | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.3 |
| raisecomMplsRsvpTERefreshBlockadeMultiple mandatory The RSVP value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted.
Note:This is rsvp-te global configuration. | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.4 |
| raisecomMplsRsvpTELSPSetupPriority obsolete The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more o… | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.5 |
| raisecomMplsRsvpTEInitPathRRInterval mandatory The rapid retransmission interval in milliseconds before
an Initial Path message is first resent if no
acknowledgement is received.
A Path message is treated as an initial … | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.7 |
| raisecomMplsRsvpTEInitPathRRDecay mandatory The percentage increase in the rapid
retransmission interval for each consecutive
unacknowledged RSVP Initial Path message. A value of 0
indicates a constant retransmission rate.… | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.8 |
| raisecomMplsRsvpTEInitPathRRLimit mandatory The maximum number of times an Initial Path message is
resent if no acknowledgement is received.
A Path message is treated as an initial Path if it is the
Path message … | scalar | Integer32 | .1.3.6.1.4.1.8886.1.25.4.9 |