raisecomMplsRsvpTEInitPathRRDecay

RAISECOM-MPLS-MIB · .1.3.6.1.4.1.8886.1.25.4.8
MIB view Table view

Object

scalar mandatory r/w Integer32 
The percentage increase in the rapid
retransmission interval for each consecutive
unacknowledged RSVP Initial Path message.  A value of 0
indicates a constant retransmission rate.
          
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing. 
          
Note:This is rsvp-te global configuration.

Context

MIB
RAISECOM-MPLS-MIB
OID
.1.3.6.1.4.1.8886.1.25.4.8
Type
scalar
Access
readwrite
Status
mandatory
Parent
raisecomMplsRsvpTEObjects
Siblings
9

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
raisecomMplsRsvpTEEnabled mandatory
MPLS rsvp enable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.1.25.4.1
raisecomMplsRsvpTEInterfaceTable mandatory
The RSVP-specific attributes of the system's interfaces.
table-.1.3.6.1.4.1.8886.1.25.4.10
raisecomMplsRsvpTERefreshInterval mandatory
The interval which is used to set the average interval between refresh path and resv messages. Note:This is rsvp-te global configuration.
scalarRefreshInterval.1.3.6.1.4.1.8886.1.25.4.2
raisecomMplsRsvpTERefreshMultiple mandatory
The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have. …
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.3
raisecomMplsRsvpTERefreshBlockadeMultiple mandatory
The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. Note:This is rsvp-te global configuration.
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.4
raisecomMplsRsvpTELSPSetupPriority obsolete
The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more o…
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.5
raisecomMplsRsvpTELSPHoldingPriority obsolete
The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less…
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.6
raisecomMplsRsvpTEInitPathRRInterval mandatory
The rapid retransmission interval in milliseconds before an Initial Path message is first resent if no acknowledgement is received. A Path message is treated as an initial …
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.7
raisecomMplsRsvpTEInitPathRRLimit mandatory
The maximum number of times an Initial Path message is resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message …
scalarInteger32.1.3.6.1.4.1.8886.1.25.4.9