raisecomMplsRsvpTEIfRRDecay
RAISECOM-MPLS-MIB ·
.1.3.6.1.4.1.8886.1.25.4.10.1.5
Object
column
mandatory
r/w
Integer32
The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP message sent out of this interface. A value of 0 indicates a constant retransmission rate.
Context
- MIB
- RAISECOM-MPLS-MIB
- OID
.1.3.6.1.4.1.8886.1.25.4.10.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- raisecomMplsRsvpTEInterfaceEntry
- Table
- raisecomMplsRsvpTEInterfaceTable
- Siblings
- 11
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomMplsRsvpTEIfRefreshInterval mandatory The average interval, in milliseconds, between Path and
Resv refresh messages for LSPs which use this interface
for RSVP-TE-signalled data.
Note:A value of 0 indic… | column | milliseconds RefreshInterval | .1.3.6.1.4.1.8886.1.25.4.10.1.1 |
| raisecomMplsRsvpTEIfHelloPersist mandatory Number of hello periods which may pass after the Hello
session times out before Hello messages cease.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.10 |
| raisecomMplsRsvpTEIfEnabled mandatory If TRUE, RSVP-TE is enabled on this Interface.
If FALSE, RSVP-TE is not enabled on this inter-
face. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.25.4.10.1.11 |
| raisecomMplsRsvpTEIfStatus mandatory 'active' on interfaces that are configured for
RSVP. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.1.25.4.10.1.12 |
| raisecomMplsRsvpTEIfRefreshMultiple mandatory The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged … | column | Integer32 | .1.3.6.1.4.1.8886.1.25.4.10.1.2 |
| raisecomMplsRsvpTEIfBlockadeMultiple mandatory The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered.
Note:A value of 0 indicates… | column | Integer32 | .1.3.6.1.4.1.8886.1.25.4.10.1.3 |
| raisecomMplsRsvpTEIfRRInterval mandatory Indicates Rapid Retry Interval (in milliseconds) that
should be used on all interfaces. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.4 |
| raisecomMplsRsvpTEIfRRLimit mandatory The maximum number of times a message is resent if no
acknowledgement is received on this interface. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.6 |
| raisecomMplsRsvpTEIfHelloPeriod mandatory Default period in milliseconds between sending Hello
messages to all neighbors on this interface. If this is
set to 0, no Hello messages are sent by this interface.
Note:This is … | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.7 |
| raisecomMplsRsvpTEIfHelloHoldPeriod mandatory Number of hello periods which may pass without receiving a
successful Hello message from a partner before the Hello
session times out.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.8 |
| raisecomMplsRsvpTEIfHelloDecay mandatory Percentage increase in hello period after each Hello
message sent when the hello session with the neighbor has
timed out.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.9 |