raisecomMplsRsvpTEIfHelloPeriod
RAISECOM-MPLS-MIB ·
.1.3.6.1.4.1.8886.1.25.4.10.1.7
Object
column
mandatory
r/w
Unsigned32
Default period in milliseconds between sending Hello messages to all neighbors on this interface. If this is set to 0, no Hello messages are sent by this interface. Note:This is configured on an interface
Context
- MIB
- RAISECOM-MPLS-MIB
- OID
.1.3.6.1.4.1.8886.1.25.4.10.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- raisecomMplsRsvpTEInterfaceEntry
- Table
- raisecomMplsRsvpTEInterfaceTable
- Siblings
- 11
Syntax
Unsigned32
- Source
- CISCO-ATM-SWITCH-CUG-MIBUnsigned32
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomMplsRsvpTEIfRefreshInterval mandatory The average interval, in milliseconds, between Path and
Resv refresh messages for LSPs which use this interface
for RSVP-TE-signalled data.
Note:A value of 0 indic… | column | milliseconds RefreshInterval | .1.3.6.1.4.1.8886.1.25.4.10.1.1 |
| raisecomMplsRsvpTEIfHelloPersist mandatory Number of hello periods which may pass after the Hello
session times out before Hello messages cease.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.10 |
| raisecomMplsRsvpTEIfEnabled mandatory If TRUE, RSVP-TE is enabled on this Interface.
If FALSE, RSVP-TE is not enabled on this inter-
face. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.25.4.10.1.11 |
| raisecomMplsRsvpTEIfStatus mandatory 'active' on interfaces that are configured for
RSVP. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.1.25.4.10.1.12 |
| raisecomMplsRsvpTEIfRefreshMultiple mandatory The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged … | column | Integer32 | .1.3.6.1.4.1.8886.1.25.4.10.1.2 |
| raisecomMplsRsvpTEIfBlockadeMultiple mandatory The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered.
Note:A value of 0 indicates… | column | Integer32 | .1.3.6.1.4.1.8886.1.25.4.10.1.3 |
| raisecomMplsRsvpTEIfRRInterval mandatory Indicates Rapid Retry Interval (in milliseconds) that
should be used on all interfaces. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.4 |
| raisecomMplsRsvpTEIfRRDecay mandatory The percentage increase in the rapid retransmission
interval for each consecutive unacknowledged RSVP message
sent out of this interface. A value of 0 indicates a
constant retran… | column | Integer32 | .1.3.6.1.4.1.8886.1.25.4.10.1.5 |
| raisecomMplsRsvpTEIfRRLimit mandatory The maximum number of times a message is resent if no
acknowledgement is received on this interface. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.6 |
| raisecomMplsRsvpTEIfHelloHoldPeriod mandatory Number of hello periods which may pass without receiving a
successful Hello message from a partner before the Hello
session times out.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.8 |
| raisecomMplsRsvpTEIfHelloDecay mandatory Percentage increase in hello period after each Hello
message sent when the hello session with the neighbor has
timed out.
Note:This is configured on an interface | column | Unsigned32 | .1.3.6.1.4.1.8886.1.25.4.10.1.9 |