rsWSDVLANRedundOperStatus

RADWARE-MIB · .1.3.6.1.4.1.89.35.1.52
MIB view Table view

Object

scalar mandatory r/w Enumeration 
Sets the backup redundant device for a VLAN.
blockBroadcast - blocks only the broadcast traffic
forwardTraffic - forwards the traffic
blockAll - blocks broadcast and unicast traffic

Context

MIB
RADWARE-MIB
OID
.1.3.6.1.4.1.89.35.1.52
Type
scalar
Access
readwrite
Status
mandatory
Parent
rsServerDispatcher
Siblings
171

Syntax

Enumeration

Values & Constraints

Enumerated Values
1blockBroadcast
2forwardTraffic
3blockAll

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rsWSDHardwareLicense mandatory
The new licence for the device
scalarOctetString.1.3.6.1.4.1.89.35.1.100
rsWSDHardwareLicenseID mandatory
License ID used for license downgrade
scalarOctetString.1.3.6.1.4.1.89.35.1.101
rdwrSnmpParametersnode-.1.3.6.1.4.1.89.35.1.102
rsWSDSyslogSourcePort mandatory
Determines the source port with which Syslog packets will be sent.
scalarInteger32.1.3.6.1.4.1.89.35.1.103
rsSESSIONnode-.1.3.6.1.4.1.89.35.1.104
rsLinkAggregationHashnode-.1.3.6.1.4.1.89.35.1.105
rsScheduleTable mandatory
The table of event schedules. All schedules are kept in it.
table-.1.3.6.1.4.1.89.35.1.106
rdwrFtpParametersnode-.1.3.6.1.4.1.89.35.1.107
rsFullMacCompareStatus mandatory
Select whether all 48 bits of the destination MAC address are used to determine if a packet is destined to the device, or just 42 (the default)
scalarEnumeration.1.3.6.1.4.1.89.35.1.108
rsREStateMonitoringnode-.1.3.6.1.4.1.89.35.1.109
rdwrTerminalParamsnode-.1.3.6.1.4.1.89.35.1.110
rdwrMasterInterfaceGroupingPortsTable mandatory
The table contains all the physical ports. Each port can be set to included/excluded from the master interface grouping.
table-.1.3.6.1.4.1.89.35.1.111
rdwr5SecAvgResourceUtilization mandatory
Last 5 sec. Engine Average Utilization
scalarInteger32.1.3.6.1.4.1.89.35.1.112
rdwr60SecAvgResourceUtilization mandatory
Last 60 sec. Engine Average Utilization
scalarInteger32.1.3.6.1.4.1.89.35.1.113
rdwrArpWithInterfaceGroup mandatory
indicates if the device should send arp request (broadcast) when redundancy enable (interface grouping enable) and the (main) device is down (interface/s go down)
scalarEnumeration.1.3.6.1.4.1.89.35.1.114
rdwrDBindnode-.1.3.6.1.4.1.89.35.1.115
rdwrDPnode-.1.3.6.1.4.1.89.35.1.116
rsDOSnode-.1.3.6.1.4.1.89.35.1.117
rsSTATEFULnode-.1.3.6.1.4.1.89.35.1.118
rsAPMnode-.1.3.6.1.4.1.89.35.1.119
rsWSDServerStatTable mandatory
In this table the WSD collects statistics per servers.
table-.1.3.6.1.4.1.89.35.1.12
rdwrIpsecnode-.1.3.6.1.4.1.89.35.1.120
rdwrDedicatedManagementPort mandatory
A dedicated port for management - 0 is Not Assigned
scalarInteger32.1.3.6.1.4.1.89.35.1.121
rsGenericnode-.1.3.6.1.4.1.89.35.1.122
rdwrClientsTableStatisticsnode-.1.3.6.1.4.1.89.35.1.123
rsWSDSyslogDestinationPort mandatory
Determines the destination port with which Syslog packets will be sent.
scalarInteger32.1.3.6.1.4.1.89.35.1.124
rdwrPortsTagTable mandatory
The table contains all the physical ports. Each entry can force port tag for incoming and outgoing traffic.
table-.1.3.6.1.4.1.89.35.1.125
rsPhysPortMirrorThresholdUnits mandatory
Units used to measure port-mirroring threshold.
scalarEnumeration.1.3.6.1.4.1.89.35.1.126
rsPhysPortMirrorThresholdInterval mandatory
Time interval in which port mirroring will be active, if the mode is threshold
scalarInteger32.1.3.6.1.4.1.89.35.1.127
rsPhysPortMirrorThresholdReset mandatory
Reset the port mirroring threshold
scalarEnumeration.1.3.6.1.4.1.89.35.1.128
rdwrDayLightSavingnode-.1.3.6.1.4.1.89.35.1.129
rdwrCommonClientTablenode-.1.3.6.1.4.1.89.35.1.130
rdwrVersionIdentifierTable mandatory
Row holding version verification information.
table-.1.3.6.1.4.1.89.35.1.131
rdwrVrrpnode-.1.3.6.1.4.1.89.35.1.132
rdwrWSDCommonnode-.1.3.6.1.4.1.89.35.1.134
rdwrCdbParametersnode-.1.3.6.1.4.1.89.35.1.139
rdwrMirroringnode-.1.3.6.1.4.1.89.35.1.140
rsWSDThroughputLicense mandatory
The new licence for the device
scalarOctetString.1.3.6.1.4.1.89.35.1.141
rsWSDThroughputLicenseID mandatory
License ID used for license downgrade
scalarOctetString.1.3.6.1.4.1.89.35.1.142
rsWSDThroughputLicenseIP mandatory
License IP
scalarOctetString.1.3.6.1.4.1.89.35.1.143
rsWSDThroughputLicenseMethod mandatory
License Method
scalarOctetString.1.3.6.1.4.1.89.35.1.144
rsSSLCertificatenode-.1.3.6.1.4.1.89.35.1.148
rdwrTemperatureCPU1Get mandatory
get the temperature of CPU1
scalarInteger32.1.3.6.1.4.1.89.35.1.150
rdwrTemperatureCPU2Get mandatory
get the temperature of CPU2
scalarInteger32.1.3.6.1.4.1.89.35.1.151
rdwrTemperatureWarningThresholdGet mandatory
get the temperature warning threshold
scalarInteger32.1.3.6.1.4.1.89.35.1.152
rdwrTemperatureShutdownThresholdGet mandatory
get the temperature shutdown threshold
scalarInteger32.1.3.6.1.4.1.89.35.1.153
rdwrTemperatureThresholdStatusCPU1Get mandatory
get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
scalarEnumeration.1.3.6.1.4.1.89.35.1.154
rdwrTemperatureThresholdStatusCPU2Get mandatory
get the threshold status of CPU2 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
scalarEnumeration.1.3.6.1.4.1.89.35.1.155
rndNumberOfHD mandatory
The number of hard drives.
scalarInteger32.1.3.6.1.4.1.89.35.1.156
rndSSLCardName mandatory
The name of the SSL card.
scalarOctetString.1.3.6.1.4.1.89.35.1.157
rndCompCardName mandatory
The name of the compression card.
scalarOctetString.1.3.6.1.4.1.89.35.1.158
rdwrHardDisknode-.1.3.6.1.4.1.89.35.1.159
wsdRedundTable mandatory
List of Farm IP addresses backed up by this router.
table-.1.3.6.1.4.1.89.35.1.16
rdwrHardDiskLoggingnode-.1.3.6.1.4.1.89.35.1.160
rdwrConfigurationSyncnode-.1.3.6.1.4.1.89.35.1.161
rsSystemFansTable mandatory
A table containing the fans status.
table-.1.3.6.1.4.1.89.35.1.162
rdwrDualPsuStatus mandatory
This variable represent the current status of the power supplies 0 - Single PowerSupply OK 1 - First PowerSupply Failed 2 - Second PowerSupply Failed 3 - Double PowerS…
scalarEnumeration.1.3.6.1.4.1.89.35.1.163
rsNetPortUtilizationTable mandatory
Display the port Utilization.
table-.1.3.6.1.4.1.89.35.1.164
rsHWCPUTemperatureTable mandatory
Display the CPU temperature.
table-.1.3.6.1.4.1.89.35.1.165
rdwrTotalIncomingTrafficPeak mandatory
This variable represent the maximum incoming traffic in Mbps
scalarInteger32.1.3.6.1.4.1.89.35.1.166
rsHWCoreUtilizationTable mandatory
Display the device core utilization.
table-.1.3.6.1.4.1.89.35.1.167
rsManagePronode-.1.3.6.1.4.1.89.35.1.170
rsUserLockoutInterval mandatory
Lockout time interval for user account (min). Zero means no lockout.
scalarInteger32.1.3.6.1.4.1.89.35.1.171
rdwrManagmentPortsStatus mandatory
Is management port enabled on the device
scalarFeatureStatus.1.3.6.1.4.1.89.35.1.172
rdwrSyslogServerTable mandatory
A table of syslog servers.
table-.1.3.6.1.4.1.89.35.1.173
rsWSDSyslogGlobalStatus mandatory
Enable/Disable syslog message sending to remote station.
scalarEnumeration.1.3.6.1.4.1.89.35.1.174
rsSendPortUnreachableStatus mandatory
enable - send port unreachable (UDP) or reset (TCP) when port not available. disable - don't send a response, just discard the received packet.
scalarEnumeration.1.3.6.1.4.1.89.35.1.175
rsTacacsServernode-.1.3.6.1.4.1.89.35.1.180
rsWSDResourceUtilizationInstance1 mandatory
Resource Utilization of WSD on instance 1. Considers network utilization and internal CPU utilization
scalarInteger32.1.3.6.1.4.1.89.35.1.181
rsWSDREResourceUtilizationInstance1 mandatory
Resource Utilization of network utilization on instance 1
scalarInteger32.1.3.6.1.4.1.89.35.1.182
rsWSDRSResourceUtilizationInstance1 mandatory
Resource Utilization of internal CPU utilization on instance 1
scalarInteger32.1.3.6.1.4.1.89.35.1.183
rdwr5SecAvgResourceUtilizationInstance1 mandatory
Average 5 seconds Resource Utilization of internal CPU utilization on instance 1
scalarInteger32.1.3.6.1.4.1.89.35.1.184
rdwr60SecAvgResourceUtilizationInstance1 mandatory
Average 60 seconds Resource Utilization of internal CPU utilization on instance 1
scalarInteger32.1.3.6.1.4.1.89.35.1.185
rsFormFactor mandatory
Show current platform type
scalarEnumeration.1.3.6.1.4.1.89.35.1.186
rsAppAgPort mandatory
Show current AppAG port number
scalarInteger32.1.3.6.1.4.1.89.35.1.187
rsAppAgIpAddress mandatory
Show current AppAG IP Address
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.188
rsAppAgInstId mandatory
Show current AppAG Instance Id
scalarOctetString.1.3.6.1.4.1.89.35.1.189
rsWSDNewEntryOnSourcePort mandatory
Check source port and if different open new client entry.
scalarEnumeration.1.3.6.1.4.1.89.35.1.19
rsAppAGChannelIp mandatory
The Management interface IP of the AppAG
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.190
rsAppAGChannelMask mandatory
The Management interface netmask of the AppAG
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.191
rsAppAGChannelGw mandatory
The Management interface GW IP of the AppAG
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.192
rsWSDVcpuLicense mandatory
The vCPU licence
scalarOctetString.1.3.6.1.4.1.89.35.1.193
rsWSDVcpuLicenseID mandatory
VCPU License ID used for license downgrade
scalarOctetString.1.3.6.1.4.1.89.35.1.194
rsWSDVcpuLicenseIP mandatory
VCPU License IP
scalarOctetString.1.3.6.1.4.1.89.35.1.195
rsWSDVcpuLicenseMethod mandatory
VCPU License Method
scalarOctetString.1.3.6.1.4.1.89.35.1.196
rsSSLCertificateSANTable mandatory
Table containing groups of filters.
table-.1.3.6.1.4.1.89.35.1.197
rsLinkAggregationModeTable mandatory
Table containing groups of filters.
table-.1.3.6.1.4.1.89.35.1.198
rsLinkAggregationDynamicTrunksSupport mandatory
Whether dynamic trunks (LACP) support is enabled or not
scalarFeatureStatus.1.3.6.1.4.1.89.35.1.199
rsWSDSelectServerOnSourcePort mandatory
Check source port and if different select a new server.
scalarEnumeration.1.3.6.1.4.1.89.35.1.20
rsSysUtilControllerCpuWarningAlertStartThreshold mandatory
Specifies the warning alert-start threshold for high utilization of the controller CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.200
rsSysUtilControllerCpuWarningAlertStopThreshold mandatory
Specifies the warning alert-stop threshold for high utilization of the controller CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.201
rsSysUtilAnyEngineCpuWarningAlertStartThreshold mandatory
Specifies the warning alert-start threshold for high utilization of any flow-engine CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.202
rsSysUtilAnyEngineCpuWarningAlertStopThreshold mandatory
Specifies the warning alert-stop threshold for high utilization of any flow-engine CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.203
rsSysUtilControllerCpuErrorAlertStartThreshold mandatory
Specifies the error alert-start threshold for high utilization of the controller CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.204
rsSysUtilControllerCpuErrorAlertStopThreshold mandatory
Specifies the error alert-stop threshold for high utilization of the controller CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.205
rsSysUtilAnyEngineCpuErrorAlertStartThreshold mandatory
Specifies the error alert-start threshold for high utilization of any flow-engine CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.206
rsSysUtilAnyEngineCpuErrorAlertStopThreshold mandatory
Specifies the error alert-stop threshold for high utilization of any flow-engine CPU
scalarInteger32.1.3.6.1.4.1.89.35.1.207
rsSysUtilCpuAlertsStatus mandatory
CPU alerts status
scalarEnumeration.1.3.6.1.4.1.89.35.1.208
rsWSDRedundancyMode mandatory
Defines whether interface grouping functionality is enabled on the device.
scalarEnumeration.1.3.6.1.4.1.89.35.1.21
rsNsdMode mandatory
The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers.
scalarEnumeration.1.3.6.1.4.1.89.35.1.22
rsNsdWINSAddr mandatory
NetBIOS Name Server IP Address.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.23
rsWSDSyslogStatus mandatory
Enable/Disable syslog message sending to remote station.
scalarEnumeration.1.3.6.1.4.1.89.35.1.26
rsWSDSyslogAddress mandatory
The IP Address of the syslog station.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.89.35.1.27
rsWSDNTCheckTable mandatory
In this table the WSD collects NT statistics per servers.
table-.1.3.6.1.4.1.89.35.1.28
rsWSDPrivateCheckTable mandatory
In this table the WSD collects private statistics per server.
table-.1.3.6.1.4.1.89.35.1.29
rsWSDDNSResolution mandatory
Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.
scalarEnumeration.1.3.6.1.4.1.89.35.1.31
rsWSDUserPassword mandatory
Software download user provided password.
scalarOctetString.1.3.6.1.4.1.89.35.1.33
rsWSDUserVersion mandatory
Software download user provided version.
scalarOctetString.1.3.6.1.4.1.89.35.1.34
rsWSDNatStatus mandatory
Enable/Disable NAT - to hide the address of the server in messages send .
scalarEnumeration.1.3.6.1.4.1.89.35.1.35
rsWSDRedundancyTakeback mandatory
Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command
scalarEnumeration.1.3.6.1.4.1.89.35.1.37
rsMLBnode-.1.3.6.1.4.1.89.35.1.38
rsCSDnode-.1.3.6.1.4.1.89.35.1.39
rsNWSDnode-.1.3.6.1.4.1.89.35.1.40
rsWSDIfTable mandatory
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
table-.1.3.6.1.4.1.89.35.1.41
rsWSDClientMirrorPercentage mandatory
The percent of client entries to back up.
scalarInteger32.1.3.6.1.4.1.89.35.1.42
rsWSDMirrorStatus mandatory
Enable/Disable mirroring. This enables the allocation of the mirror tables.
scalarEnumeration.1.3.6.1.4.1.89.35.1.43
rsWSDMirrorProtocolMode mandatory
Enable/Disable of the mirror protocol. That is whether to send the mirror messages.
scalarEnumeration.1.3.6.1.4.1.89.35.1.44
rsWSDApplicationMirrorTable mandatory
Table containing the list of active mirror entries.
table-.1.3.6.1.4.1.89.35.1.45
rsWSDClientMirrorPollingTime mandatory
The polling time for sending the client entries.
scalarInteger32.1.3.6.1.4.1.89.35.1.46
rsPlatformIdentifier mandatory
An administratively-assigned value that identifies managed device platform.
scalarEnumeration.1.3.6.1.4.1.89.35.1.47
rsConfigurationIdentifier mandatory
An administratively-assigned value that identifies managed device configuration. cg - copper gig, fg - fiber gig, fxg - fiber 10gig.
scalarEnumeration.1.3.6.1.4.1.89.35.1.48
rsSWPasswordStatus mandatory
Software download password status.
scalarEnumeration.1.3.6.1.4.1.89.35.1.49
rsWSDFlashSize mandatory
Flash Size
scalarInteger32.1.3.6.1.4.1.89.35.1.50
rsWSDDRAMSize mandatory
DRAM Size
scalarInteger32.1.3.6.1.4.1.89.35.1.51
rsWSDResourceUtilization mandatory
Highest Utilization of controller and engines
scalarInteger32.1.3.6.1.4.1.89.35.1.53
rsWSDRSResourceUtilization mandatory
DefensePro Controller utilization
scalarInteger32.1.3.6.1.4.1.89.35.1.54
rsWSDREResourceUtilization mandatory
Resource Utilization of network utilization
scalarInteger32.1.3.6.1.4.1.89.35.1.55
rsWSDBuildNumber mandatory
Build number
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.89.35.1.56
rsWSDUseOneTrap mandatory
When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent.
scalarEnumeration.1.3.6.1.4.1.89.35.1.57
rsWSDSecuredCommnode-.1.3.6.1.4.1.89.35.1.58
rsWSDSNMPPortsTable mandatory
The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device.
table-.1.3.6.1.4.1.89.35.1.59
rsBWMnode-.1.3.6.1.4.1.89.35.1.60
rsWSDTelnetUserTable mandatory
A table containing the users authorized to use TELNET.
table-.1.3.6.1.4.1.89.35.1.61
rsWSDTelnetParamsnode-.1.3.6.1.4.1.89.35.1.62
rsSSDnode-.1.3.6.1.4.1.89.35.1.63
rsWSDThresholdWarningsnode-.1.3.6.1.4.1.89.35.1.64
rsIDSnode-.1.3.6.1.4.1.89.35.1.65
rsWSDLicense mandatory
The new licence for the device
scalarOctetString.1.3.6.1.4.1.89.35.1.66
rsErrMailParamsnode-.1.3.6.1.4.1.89.35.1.67
rsWSDWebParamsnode-.1.3.6.1.4.1.89.35.1.68
rsWSDSysParamsnode-.1.3.6.1.4.1.89.35.1.69
rsWSDLicenseID mandatory
License ID used for license downgrade
scalarOctetString.1.3.6.1.4.1.89.35.1.70
rsWSDSendFakeArp mandatory
Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service.
scalarEnumeration.1.3.6.1.4.1.89.35.1.71
rsWSDNTPnode-.1.3.6.1.4.1.89.35.1.72
rsStatisticsnode-.1.3.6.1.4.1.89.35.1.73
rsPhysPortMirrorTable mandatory
Table containing the list of copy ports
table-.1.3.6.1.4.1.89.35.1.74
rsCPnode-.1.3.6.1.4.1.89.35.1.75
rsVWSDnode-.1.3.6.1.4.1.89.35.1.76
rsWSDManagementPorts mandatory
The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will be used for sniffing.…
scalarEnumeration.1.3.6.1.4.1.89.35.1.77
rsWSDManagementPortsTable mandatory
Table containing the operation of each port..
table-.1.3.6.1.4.1.89.35.1.78
rsCCKnode-.1.3.6.1.4.1.89.35.1.79
rsWSDSshParamsnode-.1.3.6.1.4.1.89.35.1.80
rsWSDHttpsParamsnode-.1.3.6.1.4.1.89.35.1.81
rsWSDStaticForwardingTable mandatory
Table containing the static fowarding configration.
table-.1.3.6.1.4.1.89.35.1.82
rsRadiusServernode-.1.3.6.1.4.1.89.35.1.83
rsIfTable mandatory
Device physical interface table
table-.1.3.6.1.4.1.89.35.1.84
rsWSDDeviceOperationMode mandatory
Device operation mode: redirection (load balancing) or static forwarding (Dos Shield), or transparent forwarding (for IDS load balancing).
scalarEnumeration.1.3.6.1.4.1.89.35.1.85
rsWSDVersionStatus mandatory
Indicates whether the current version is closed or still open (under development).
scalarEnumeration.1.3.6.1.4.1.89.35.1.86
rsWSDSyslogFacility mandatory
The SYSLOG Priority value is calculated by multiplying the Facility number by 8 and then adding the numerical value of the Severity.
scalarEnumeration.1.3.6.1.4.1.89.35.1.87
rsACCnode-.1.3.6.1.4.1.89.35.1.88
rsWSDPingPortsTable mandatory
The table contains all the physical ports. Each port can be set to allow/block Ping operations to the device.
table-.1.3.6.1.4.1.89.35.1.89
rsWSDBackupInterfaceGrouping mandatory
When Backup Interface Grouping is enabled, the backup will take all interfaces when all of the main's interfaces are down. It will also release all interfaces at the same time whe…
scalarEnumeration.1.3.6.1.4.1.89.35.1.90
rsRegistrationStatus mandatory
Indicates whether the device has been registered. The NMS is expected to set it after successful registration.
scalarEnumeration.1.3.6.1.4.1.89.35.1.91
rsCT100node-.1.3.6.1.4.1.89.35.1.92
rsFloatingPacketOffset mandatory
Indicates whether the incoming packet offset may be changed by the application. This is not needed in most cases but is required for tagging of outgoing packets (802.1q) and packe…
scalarEnumeration.1.3.6.1.4.1.89.35.1.93
rsDnsParametersnode-.1.3.6.1.4.1.89.35.1.94
rsPrivateCheckSNMPPort mandatory
Destination SNMP port used for private and NT checks.
scalarInteger32.1.3.6.1.4.1.89.35.1.95
rsVlanTagHandling mandatory
Determine how to handle incoming tagged packets: forward them with the original tags or overwrite the tags with new ones before forwarding. Note that overwrite may in some cases s…
scalarEnumeration.1.3.6.1.4.1.89.35.1.96
rsSmtpParametersnode-.1.3.6.1.4.1.89.35.1.97
rsWSDSyslogUrl mandatory
The URL/IP Address of the syslog station.
scalarOctetString.1.3.6.1.4.1.89.35.1.98
rsFileSystemnode-.1.3.6.1.4.1.89.35.1.99