rdwrArpWithInterfaceGroup
RADWARE-MIB ·
.1.3.6.1.4.1.89.35.1.114
Object
scalar
mandatory
r/w
Enumeration
indicates if the device should send arp request (broadcast) when redundancy enable (interface grouping enable) and the (main) device is down (interface/s go down)
Context
- MIB
- RADWARE-MIB
- OID
.1.3.6.1.4.1.89.35.1.114- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- rsServerDispatcher
- Siblings
- 171
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | send |
2 | avoid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rsWSDHardwareLicense mandatory The new licence for the device | scalar | OctetString | .1.3.6.1.4.1.89.35.1.100 |
| rsWSDHardwareLicenseID mandatory License ID used for license downgrade | scalar | OctetString | .1.3.6.1.4.1.89.35.1.101 |
| rdwrSnmpParameters | node | - | .1.3.6.1.4.1.89.35.1.102 |
| rsWSDSyslogSourcePort mandatory Determines the source port with which Syslog packets will be sent. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.103 |
| rsSESSION | node | - | .1.3.6.1.4.1.89.35.1.104 |
| rsLinkAggregationHash | node | - | .1.3.6.1.4.1.89.35.1.105 |
| rsScheduleTable mandatory The table of event schedules. All schedules are kept in it. | table | - | .1.3.6.1.4.1.89.35.1.106 |
| rdwrFtpParameters | node | - | .1.3.6.1.4.1.89.35.1.107 |
| rsFullMacCompareStatus mandatory Select whether all 48 bits of the destination MAC address are used to determine if
a packet is destined to the device, or just 42 (the default) | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.108 |
| rsREStateMonitoring | node | - | .1.3.6.1.4.1.89.35.1.109 |
| rdwrTerminalParams | node | - | .1.3.6.1.4.1.89.35.1.110 |
| rdwrMasterInterfaceGroupingPortsTable mandatory The table contains all the physical ports. Each port can be set to
included/excluded from the master interface grouping. | table | - | .1.3.6.1.4.1.89.35.1.111 |
| rdwr5SecAvgResourceUtilization mandatory Last 5 sec. Engine Average Utilization | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.112 |
| rdwr60SecAvgResourceUtilization mandatory Last 60 sec. Engine Average Utilization | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.113 |
| rdwrDBind | node | - | .1.3.6.1.4.1.89.35.1.115 |
| rdwrDP | node | - | .1.3.6.1.4.1.89.35.1.116 |
| rsDOS | node | - | .1.3.6.1.4.1.89.35.1.117 |
| rsSTATEFUL | node | - | .1.3.6.1.4.1.89.35.1.118 |
| rsAPM | node | - | .1.3.6.1.4.1.89.35.1.119 |
| rsWSDServerStatTable mandatory In this table the WSD collects statistics per servers. | table | - | .1.3.6.1.4.1.89.35.1.12 |
| rdwrIpsec | node | - | .1.3.6.1.4.1.89.35.1.120 |
| rdwrDedicatedManagementPort mandatory A dedicated port for management - 0 is Not Assigned | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.121 |
| rsGeneric | node | - | .1.3.6.1.4.1.89.35.1.122 |
| rdwrClientsTableStatistics | node | - | .1.3.6.1.4.1.89.35.1.123 |
| rsWSDSyslogDestinationPort mandatory Determines the destination port with which Syslog packets will be sent. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.124 |
| rdwrPortsTagTable mandatory The table contains all the physical ports. Each entry can force port
tag for incoming and outgoing traffic. | table | - | .1.3.6.1.4.1.89.35.1.125 |
| rsPhysPortMirrorThresholdUnits mandatory Units used to measure port-mirroring threshold. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.126 |
| rsPhysPortMirrorThresholdInterval mandatory Time interval in which port mirroring will be active, if the mode is threshold | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.127 |
| rsPhysPortMirrorThresholdReset mandatory Reset the port mirroring threshold | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.128 |
| rdwrDayLightSaving | node | - | .1.3.6.1.4.1.89.35.1.129 |
| rdwrCommonClientTable | node | - | .1.3.6.1.4.1.89.35.1.130 |
| rdwrVersionIdentifierTable mandatory Row holding version verification information. | table | - | .1.3.6.1.4.1.89.35.1.131 |
| rdwrVrrp | node | - | .1.3.6.1.4.1.89.35.1.132 |
| rdwrWSDCommon | node | - | .1.3.6.1.4.1.89.35.1.134 |
| rdwrCdbParameters | node | - | .1.3.6.1.4.1.89.35.1.139 |
| rdwrMirroring | node | - | .1.3.6.1.4.1.89.35.1.140 |
| rsWSDThroughputLicense mandatory The new licence for the device | scalar | OctetString | .1.3.6.1.4.1.89.35.1.141 |
| rsWSDThroughputLicenseID mandatory License ID used for license downgrade | scalar | OctetString | .1.3.6.1.4.1.89.35.1.142 |
| rsWSDThroughputLicenseIP mandatory License IP | scalar | OctetString | .1.3.6.1.4.1.89.35.1.143 |
| rsWSDThroughputLicenseMethod mandatory License Method | scalar | OctetString | .1.3.6.1.4.1.89.35.1.144 |
| rsSSLCertificate | node | - | .1.3.6.1.4.1.89.35.1.148 |
| rdwrTemperatureCPU1Get mandatory get the temperature of CPU1 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.150 |
| rdwrTemperatureCPU2Get mandatory get the temperature of CPU2 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.151 |
| rdwrTemperatureWarningThresholdGet mandatory get the temperature warning threshold | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.152 |
| rdwrTemperatureShutdownThresholdGet mandatory get the temperature shutdown threshold | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.153 |
| rdwrTemperatureThresholdStatusCPU1Get mandatory get the threshold status of CPU1
warning - if the warning threshold exceeded
critical - if the shutdown threshold exceeded | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.154 |
| rdwrTemperatureThresholdStatusCPU2Get mandatory get the threshold status of CPU2
warning - if the warning threshold exceeded
critical - if the shutdown threshold exceeded | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.155 |
| rndNumberOfHD mandatory The number of hard drives. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.156 |
| rndSSLCardName mandatory The name of the SSL card. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.157 |
| rndCompCardName mandatory The name of the compression card. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.158 |
| rdwrHardDisk | node | - | .1.3.6.1.4.1.89.35.1.159 |
| wsdRedundTable mandatory List of Farm IP addresses backed up by this router. | table | - | .1.3.6.1.4.1.89.35.1.16 |
| rdwrHardDiskLogging | node | - | .1.3.6.1.4.1.89.35.1.160 |
| rdwrConfigurationSync | node | - | .1.3.6.1.4.1.89.35.1.161 |
| rsSystemFansTable mandatory A table containing the fans status. | table | - | .1.3.6.1.4.1.89.35.1.162 |
| rdwrDualPsuStatus mandatory This variable represent the current status of the power supplies
0 - Single PowerSupply OK
1 - First PowerSupply Failed
2 - Second PowerSupply Failed
3 - Double PowerS… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.163 |
| rsNetPortUtilizationTable mandatory Display the port Utilization. | table | - | .1.3.6.1.4.1.89.35.1.164 |
| rsHWCPUTemperatureTable mandatory Display the CPU temperature. | table | - | .1.3.6.1.4.1.89.35.1.165 |
| rdwrTotalIncomingTrafficPeak mandatory This variable represent the maximum incoming traffic in Mbps | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.166 |
| rsHWCoreUtilizationTable mandatory Display the device core utilization. | table | - | .1.3.6.1.4.1.89.35.1.167 |
| rsManagePro | node | - | .1.3.6.1.4.1.89.35.1.170 |
| rsUserLockoutInterval mandatory Lockout time interval for user account (min). Zero means no lockout. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.171 |
| rdwrManagmentPortsStatus mandatory Is management port enabled on the device | scalar | FeatureStatus | .1.3.6.1.4.1.89.35.1.172 |
| rdwrSyslogServerTable mandatory A table of syslog servers. | table | - | .1.3.6.1.4.1.89.35.1.173 |
| rsWSDSyslogGlobalStatus mandatory Enable/Disable syslog message sending to remote station. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.174 |
| rsSendPortUnreachableStatus mandatory enable - send port unreachable (UDP) or reset (TCP) when port not available. disable -
don't send a response, just discard the received packet. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.175 |
| rsTacacsServer | node | - | .1.3.6.1.4.1.89.35.1.180 |
| rsWSDResourceUtilizationInstance1 mandatory Resource Utilization of WSD on instance 1. Considers network utilization and internal CPU utilization | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.181 |
| rsWSDREResourceUtilizationInstance1 mandatory Resource Utilization of network utilization on instance 1 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.182 |
| rsWSDRSResourceUtilizationInstance1 mandatory Resource Utilization of internal CPU utilization on instance 1 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.183 |
| rdwr5SecAvgResourceUtilizationInstance1 mandatory Average 5 seconds Resource Utilization of internal CPU utilization on instance 1 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.184 |
| rdwr60SecAvgResourceUtilizationInstance1 mandatory Average 60 seconds Resource Utilization of internal CPU utilization on instance 1 | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.185 |
| rsFormFactor mandatory Show current platform type | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.186 |
| rsAppAgPort mandatory Show current AppAG port number | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.187 |
| rsAppAgIpAddress mandatory Show current AppAG IP Address | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.188 |
| rsAppAgInstId mandatory Show current AppAG Instance Id | scalar | OctetString | .1.3.6.1.4.1.89.35.1.189 |
| rsWSDNewEntryOnSourcePort mandatory Check source port and if different open new client entry. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.19 |
| rsAppAGChannelIp mandatory The Management interface IP of the AppAG | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.190 |
| rsAppAGChannelMask mandatory The Management interface netmask of the AppAG | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.191 |
| rsAppAGChannelGw mandatory The Management interface GW IP of the AppAG | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.192 |
| rsWSDVcpuLicense mandatory The vCPU licence | scalar | OctetString | .1.3.6.1.4.1.89.35.1.193 |
| rsWSDVcpuLicenseID mandatory VCPU License ID used for license downgrade | scalar | OctetString | .1.3.6.1.4.1.89.35.1.194 |
| rsWSDVcpuLicenseIP mandatory VCPU License IP | scalar | OctetString | .1.3.6.1.4.1.89.35.1.195 |
| rsWSDVcpuLicenseMethod mandatory VCPU License Method | scalar | OctetString | .1.3.6.1.4.1.89.35.1.196 |
| rsSSLCertificateSANTable mandatory Table containing groups of filters. | table | - | .1.3.6.1.4.1.89.35.1.197 |
| rsLinkAggregationModeTable mandatory Table containing groups of filters. | table | - | .1.3.6.1.4.1.89.35.1.198 |
| rsLinkAggregationDynamicTrunksSupport mandatory Whether dynamic trunks (LACP) support is enabled or not | scalar | FeatureStatus | .1.3.6.1.4.1.89.35.1.199 |
| rsWSDSelectServerOnSourcePort mandatory Check source port and if different select a new server. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.20 |
| rsSysUtilControllerCpuWarningAlertStartThreshold mandatory Specifies the warning alert-start threshold for high utilization of the controller CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.200 |
| rsSysUtilControllerCpuWarningAlertStopThreshold mandatory Specifies the warning alert-stop threshold for high utilization of the controller CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.201 |
| rsSysUtilAnyEngineCpuWarningAlertStartThreshold mandatory Specifies the warning alert-start threshold for high utilization of any flow-engine CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.202 |
| rsSysUtilAnyEngineCpuWarningAlertStopThreshold mandatory Specifies the warning alert-stop threshold for high utilization of any flow-engine CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.203 |
| rsSysUtilControllerCpuErrorAlertStartThreshold mandatory Specifies the error alert-start threshold for high utilization of the controller CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.204 |
| rsSysUtilControllerCpuErrorAlertStopThreshold mandatory Specifies the error alert-stop threshold for high utilization of the controller CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.205 |
| rsSysUtilAnyEngineCpuErrorAlertStartThreshold mandatory Specifies the error alert-start threshold for high utilization of any flow-engine CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.206 |
| rsSysUtilAnyEngineCpuErrorAlertStopThreshold mandatory Specifies the error alert-stop threshold for high utilization of any flow-engine CPU | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.207 |
| rsSysUtilCpuAlertsStatus mandatory CPU alerts status | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.208 |
| rsWSDRedundancyMode mandatory Defines whether interface grouping functionality is enabled on the device. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.21 |
| rsNsdMode mandatory The Topology chosen for the NSD.
Slow mode keeps the servers behind the NSD.
Fast mode uses retargeting to connect clients directly
to servers. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.22 |
| rsNsdWINSAddr mandatory NetBIOS Name Server IP Address. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.23 |
| rsWSDSyslogStatus mandatory Enable/Disable syslog message sending to remote station. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.26 |
| rsWSDSyslogAddress mandatory The IP Address of the syslog station. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.89.35.1.27 |
| rsWSDNTCheckTable mandatory In this table the WSD collects NT statistics per servers. | table | - | .1.3.6.1.4.1.89.35.1.28 |
| rsWSDPrivateCheckTable mandatory In this table the WSD collects private statistics per server. | table | - | .1.3.6.1.4.1.89.35.1.29 |
| rsWSDDNSResolution mandatory Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.31 |
| rsWSDUserPassword mandatory Software download user provided password. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.33 |
| rsWSDUserVersion mandatory Software download user provided version. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.34 |
| rsWSDNatStatus mandatory Enable/Disable NAT - to hide the address of the server in messages send . | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.35 |
| rsWSDRedundancyTakeback mandatory Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.37 |
| rsMLB | node | - | .1.3.6.1.4.1.89.35.1.38 |
| rsCSD | node | - | .1.3.6.1.4.1.89.35.1.39 |
| rsNWSD | node | - | .1.3.6.1.4.1.89.35.1.40 |
| rsWSDIfTable mandatory RND-specific interface table. Each table entry includes an
index, Board number, Network Address, interface status, clock
indicator and interface cost. | table | - | .1.3.6.1.4.1.89.35.1.41 |
| rsWSDClientMirrorPercentage mandatory The percent of client entries to back up. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.42 |
| rsWSDMirrorStatus mandatory Enable/Disable mirroring. This enables the allocation of the mirror tables. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.43 |
| rsWSDMirrorProtocolMode mandatory Enable/Disable of the mirror protocol. That is whether to send the mirror
messages. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.44 |
| rsWSDApplicationMirrorTable mandatory Table containing the list of active mirror entries. | table | - | .1.3.6.1.4.1.89.35.1.45 |
| rsWSDClientMirrorPollingTime mandatory The polling time for sending the client entries. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.46 |
| rsPlatformIdentifier mandatory An administratively-assigned value that identifies managed device platform. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.47 |
| rsConfigurationIdentifier mandatory An administratively-assigned value that identifies managed device configuration.
cg - copper gig, fg - fiber gig, fxg - fiber 10gig. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.48 |
| rsSWPasswordStatus mandatory Software download password status. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.49 |
| rsWSDFlashSize mandatory Flash Size | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.50 |
| rsWSDDRAMSize mandatory DRAM Size | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.51 |
| rsWSDVLANRedundOperStatus mandatory Sets the backup redundant device for a VLAN.
blockBroadcast - blocks only the broadcast traffic
forwardTraffic - forwards the traffic
blockAll - blocks broadcast and unicast traff… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.52 |
| rsWSDResourceUtilization mandatory Highest Utilization of controller and engines | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.53 |
| rsWSDRSResourceUtilization mandatory DefensePro Controller utilization | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.54 |
| rsWSDREResourceUtilization mandatory Resource Utilization of network utilization | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.55 |
| rsWSDBuildNumber mandatory Build number | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.89.35.1.56 |
| rsWSDUseOneTrap mandatory When enabled, a single trap is used to indicate server failure. When disabled,
continuous traps are sent. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.57 |
| rsWSDSecuredComm | node | - | .1.3.6.1.4.1.89.35.1.58 |
| rsWSDSNMPPortsTable mandatory The table contains all the physical ports. Each port can be set to
allow/block SNMP operations to the device. | table | - | .1.3.6.1.4.1.89.35.1.59 |
| rsBWM | node | - | .1.3.6.1.4.1.89.35.1.60 |
| rsWSDTelnetUserTable mandatory A table containing the users authorized to use TELNET. | table | - | .1.3.6.1.4.1.89.35.1.61 |
| rsWSDTelnetParams | node | - | .1.3.6.1.4.1.89.35.1.62 |
| rsSSD | node | - | .1.3.6.1.4.1.89.35.1.63 |
| rsWSDThresholdWarnings | node | - | .1.3.6.1.4.1.89.35.1.64 |
| rsIDS | node | - | .1.3.6.1.4.1.89.35.1.65 |
| rsWSDLicense mandatory The new licence for the device | scalar | OctetString | .1.3.6.1.4.1.89.35.1.66 |
| rsErrMailParams | node | - | .1.3.6.1.4.1.89.35.1.67 |
| rsWSDWebParams | node | - | .1.3.6.1.4.1.89.35.1.68 |
| rsWSDSysParams | node | - | .1.3.6.1.4.1.89.35.1.69 |
| rsWSDLicenseID mandatory License ID used for license downgrade | scalar | OctetString | .1.3.6.1.4.1.89.35.1.70 |
| rsWSDSendFakeArp mandatory Controls whether a backup will send a fake ARP, advertising the main box's
interfaces and VIPs, when the main box returns to service. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.71 |
| rsWSDNTP | node | - | .1.3.6.1.4.1.89.35.1.72 |
| rsStatistics | node | - | .1.3.6.1.4.1.89.35.1.73 |
| rsPhysPortMirrorTable mandatory Table containing the list of copy ports | table | - | .1.3.6.1.4.1.89.35.1.74 |
| rsCP | node | - | .1.3.6.1.4.1.89.35.1.75 |
| rsVWSD | node | - | .1.3.6.1.4.1.89.35.1.76 |
| rsWSDManagementPorts mandatory The entry indicates the functionality of the device.
outOfPath implies that the device will be able to have a management
port, and the rest of the ports will be used for sniffing.… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.77 |
| rsWSDManagementPortsTable mandatory Table containing the operation of each port.. | table | - | .1.3.6.1.4.1.89.35.1.78 |
| rsCCK | node | - | .1.3.6.1.4.1.89.35.1.79 |
| rsWSDSshParams | node | - | .1.3.6.1.4.1.89.35.1.80 |
| rsWSDHttpsParams | node | - | .1.3.6.1.4.1.89.35.1.81 |
| rsWSDStaticForwardingTable mandatory Table containing the static fowarding configration. | table | - | .1.3.6.1.4.1.89.35.1.82 |
| rsRadiusServer | node | - | .1.3.6.1.4.1.89.35.1.83 |
| rsIfTable mandatory Device physical interface table | table | - | .1.3.6.1.4.1.89.35.1.84 |
| rsWSDDeviceOperationMode mandatory Device operation mode: redirection (load balancing) or static
forwarding (Dos Shield), or transparent forwarding (for IDS load
balancing). | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.85 |
| rsWSDVersionStatus mandatory Indicates whether the current version is closed or still open (under development). | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.86 |
| rsWSDSyslogFacility mandatory The SYSLOG Priority value is calculated by multiplying the Facility
number by 8 and then adding the numerical value of the Severity. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.87 |
| rsACC | node | - | .1.3.6.1.4.1.89.35.1.88 |
| rsWSDPingPortsTable mandatory The table contains all the physical ports. Each port can be set to
allow/block Ping operations to the device. | table | - | .1.3.6.1.4.1.89.35.1.89 |
| rsWSDBackupInterfaceGrouping mandatory When Backup Interface Grouping is enabled, the backup will take all interfaces when all of the main's
interfaces are down. It will also release all interfaces at the same time whe… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.90 |
| rsRegistrationStatus mandatory Indicates whether the device has been registered. The NMS is expected to set it after
successful registration. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.91 |
| rsCT100 | node | - | .1.3.6.1.4.1.89.35.1.92 |
| rsFloatingPacketOffset mandatory Indicates whether the incoming packet offset may be changed by the application. This is not needed in
most cases but is required for tagging of outgoing packets (802.1q) and packe… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.93 |
| rsDnsParameters | node | - | .1.3.6.1.4.1.89.35.1.94 |
| rsPrivateCheckSNMPPort mandatory Destination SNMP port used for private and NT checks. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.95 |
| rsVlanTagHandling mandatory Determine how to handle incoming tagged packets: forward them with the original tags or
overwrite the tags with new ones before forwarding. Note that overwrite may in some
cases s… | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.96 |
| rsSmtpParameters | node | - | .1.3.6.1.4.1.89.35.1.97 |
| rsWSDSyslogUrl mandatory The URL/IP Address of the syslog station. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.98 |
| rsFileSystem | node | - | .1.3.6.1.4.1.89.35.1.99 |