e1t1Lof
RAD-ds1Interface-MIB ·
.1.3.6.1.4.1.164.3.1.6.4.0.26
Object
notification
This trap indicates that a Loss of Frame (LOF) was detected on an E1/T1 interface.
Context
- MIB
- RAD-ds1Interface-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.4.0.26- Type
- notification
- Status
- current
- Parent
- prtDS1Events
- Siblings
- 34
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ds1LocalMultiframeAlarmTrap This trap indicates near end (Local) Loss of
Multiframe Alignment, of the user E1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.1 |
| ds1AisSyncLossTrap This trap indicates near end (Local)
Loss of Frame Alignment (Sync Loss), caused by the reception
of AIS at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.10 |
| ds1AisTrap This trap indicates AIS being received
at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.11 |
| ds1NetworkRemoteLoopTrap This trap indicates that a remote loopback
has been activated, on the local uplink interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.12 |
| ds1RemoteLoopTrap This trap indicates that a remote loopback
has been activated, on the local user port. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.13 |
| ds1LocalLoopTrap This trap indicates that a local loopback
has been activated on the user port. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.14 |
| ds1ExcessiveFrameSlipTrap This trap indicates that the number of Frame Slips
detected at the user DS1 interface, during the last minute
exceeds threshold. For LA-110, threshold value is 10.
This usually in… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.15 |
| ds1ExcessiveCrc4ErrorTrap This trap indicates that the error rate
detected on the CRC-4 bits at the
user DS1 interface, is high. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.16 |
| ds1ExcessiveLocalMfAlarmTrap This trap indicates that the number of local
Loss of Multiframe Alignment events, detected at
the user E1 interface during the last minute exceeds threshold.
For LA-110, threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.17 |
| ds1ExcessiveRemoteMfAlarmTrap This trap indicates that the number of
Loss of multiframe alignment events reported
by the remote unit connected to the user
E1 interface during the last minute exceeds threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.18 |
| ds1ExcessiveRemoteSyncLossTrap This trap indicates that the number of far end
(remote) Loss of Synchronization alarms,
reported by the user DS1 interface
during the last minute, exceeds threshold.
For LA-110… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.19 |
| ds1RemoteMultiframeAlarmTrap This trap indicates that the far end (remote) unit,
connected to the user E1 interface, reports
Loss of Multiframe Alignment. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.2 |
| ds1ExcessiveLocalSyncLossTrap This trap indicates that the number of
Loss of local Synchronization alarms
reported by the user DS1 interface
during the last minute, exceeds threshold.
For LA-110, threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.20 |
| ds1SignalLossTrap This trap indicates Signal Loss.
(possible reason - cable disconnection. etc.) | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.21 |
| e1t1Ais This trap indicates that an Alarm Indication Signal (AIS) was detected
on an E1/T1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.25 |
| e1t1Rai This trap shows that a Remote Alarm Indication (RAI) was detected by an E1/T1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.27 |
| e1t1Lomf This trap indicates that a Loss of Multi-Frame was detected on an E1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.28 |
| ds1LinkFrameSlipTrap This trap indicates that a Frame Slip occurred at the user
DS1 interface. This usually indicates timing problems
(incorrect selection of timing reference),
on the user DS1 lin… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.3 |
| e1t1Los This trap indicates that a Loss of signal was detected on an E1/T1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.30 |
| e1t1Loopback This trap indicates that a Local or Remote Loopback has been activated on a T1/J1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.36 |
| e1t1LoopbackOff This trap indicates that a Local or Remote Loopback has ended on a T1/J1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.37 |
| e1t1EsLineTca This trap indicates DS1 Line Errored Seconds (ES) threshold
crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.38 |
| e1t1CvPathTca This trap indicates DS1 Path Coding Violations (CV)
threshold crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.39 |
| ds1BpvErrorTrap This trap indicates a Bipolar Violation (BPV)
error has been detected at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.4 |
| e1t1EsPathTca This trap indicates DS1 Path Errored Seconds (ES) threshold
crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.40 |
| e1t1SesPathTca This trap indicates DS1 Path Severely Errored Seconds (SES)
threshold crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.41 |
| e1t1SefsPathTca This trap indicates DS1 Path Severely Errored Framing
Seconds (SEFS) threshold crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.42 |
| e1t1CssPathTca This trap indicates DS1 Path Controlled Slip Seconds (CSS)
threshold crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.43 |
| e1t1UasPathTca This trap indicates DS1 Path Unavailable Seconds (UAS)
threshold crossing alert | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.44 |
| ds1ExcessiveBpvTrap This trap indicates excessive number of
Bipolar Violation errors (BPV)
detected by the user DS1 interface | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.5 |
| ds1Crc4ErrorTrap This trap indicates that a frame with CRC-4 error has been
detected at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.6 |
| ds1ExcessiveErrorRatioTrap This trap indicates that the error rate, detected
at the user DS1 interface, on the frame synchronization bits
is high, as defined by ITU-T Rec. G.732. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.7 |
| ds1RemoteSyncLossTrap This trap indicates that the far-end (remote)
unit, connected to user DS1 interface,
reports Loss of Frame Alignment (Sync Loss). | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.8 |
| ds1LocalSyncLossTrap This trap indicates near end (Local)
Loss of Frame Alignment failure (Sync Loss),
of the user DS1 interface | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| RAD-GEN-MIBalarmEventLogSourceName This object identifies the alarm or event source name defined as an ASCII string.
For detailed description see object activeAlarmSourceName. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.10 |
| RAD-GEN-MIBalarmEventLogAlarmOrEventId This object identifies the ID of the alarm or the event. | column | AlarmEventId | .1.3.6.1.4.1.164.6.5.2.1.1.3 |
| RAD-GEN-MIBalarmEventLogDescription The description of the alarm or event. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.4 |
| RAD-GEN-MIBalarmEventLogSeverity For raised alarms this object denotes the specific alarm severity;
For cleared alarms its value is always clear(1).
For events the value of this object is always warning(6). | column | AlarmSeverity | .1.3.6.1.4.1.164.6.5.2.1.1.7 |
| RAD-GEN-MIBalarmEventLogDateAndTime This variable denotes the time in which the alarm or the event occurred.
If the NE implements a real-time clock, this variable MUST hold the UTC time.
If the NE does not support a… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.5.2.1.1.2 |
| RAD-GEN-MIBalarmEventReason This object is relevant for alarms only.
It shows the reason for clearing the alarm. | column | AlarmReason | .1.3.6.1.4.1.164.6.5.2.1.1.9 |
| IF-MIBifAlias This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.
On the first instantiati… | column | OctetString | .1.3.6.1.2.1.31.1.1.1.18 |
| DS1-MIBdsx1LineStatus This variable indicates the line status of the
interface. It contains loopback, failure,
received alarm and transmitted alarms
information.
The dsx1LineStatus is a… | column | Integer32 | .1.3.6.1.2.1.10.18.6.1.10 |