prtMl4Service

RAD-Mpmx-MIB · .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9

Object

column r/w Enumeration

Link Service.
leasedLine - usual TDM interface.
v51        - V5.1 interface.
v52Master  - V5.2 Link to Local Exchange.
v52Slave   - a ML that is transferred to the v52Master.

Context

MIB: RAD-Mpmx-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9
Type: column
Access: readwrite
Status: current
Parent: prtMl4CnfgEntry
Table: prtMl4CnfgTable
Siblings: 21

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notApplicable
`2`	leasedLine
`3`	v51
`4`	v52Master
`5`	v52Slave

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtMl4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.1`
prtMl4IpAddress IP Address of the port.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.10`
prtMl4IpMask IP subnet mask of the port.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.11`
prtMl4SignalingMode Refers to the signaling mode of the port (or framer module). notApplicable(1)- means that no framer is needed for this port (no signaling), or that this object is not relev…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.12`
prtMl4EchoCanceler Echo canceler activation.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.13`
prtMl4OosErrorSource OOS (Out-of-Service) Error Source. This object is applicable for T1 ports only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.14`
prtMl4OosEntryThreshold This object defines the number of Errors per Second that determine the minimum unacceptable noise level. This value will be the Entry Threshold to the OOS (Out-of-Service) state.…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.15`
prtMl4OosExitThreshold This object defines the number of consecutive Error-Free-Seconds before going from OOS state to Normal state. This value will be the Exit Threshold from the OOS (Out-of-Service) s…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.16`
prtMl4LogicalLinkId This object defines for a V5.2 Master ML the Logical Link Id. Valid values are: 0..256. NA=257.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.17`
prtMl4DedicatedTs A unique number to identify Dedicated TS of the E1 port (V5.2). It is applicable only when prtMl4Service=v52Slave and prtExPh1MlInbandMng selected is dedicatedTs, dedicatedPpp or…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.18`
prtMl4RemCrc This object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.19`
prtMl4SltIdx This attribute indicates a unique slot position where the module is inserted.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.2`
prtMl4CrossConnectLevel This object indicates whether the cross connect is on DS1 or DS0 (time-slots) level. When cross connect level is ds1, Destination Slot is indicated by prtGenCnfgLinkToSlot, De…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.20`
prtMl4PppEchoFailDetection This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated TS PPP. Default=Dis…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.21`
prtMl4EcanCasControl This object enables/disables ECAN (Echo Canceller) control activation/deactivation sent via the A, B, C, D multiframe signaling BITs.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.22`
prtMl4PrtIdx This attribute indicates a unique port number.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.3`
prtMl4SigProfile This object indicates the Signaling Profile of the port. none - when the Frame is G732N (no MF) or Unframed. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4 p5 = …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.4`
prtMl4CGA This object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main) will be…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.5`
prtMl4Oos 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service perio…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.6`
prtMl4VoiceOos Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.7`
prtMl4DataOos Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.19.1.1.8`