prtMl4Oos
RAD-Mpmx-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.6
Object
column
r/w
Enumeration
'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service periods.
'forcedBusy' = MK = both A and B signaling bits are forced
to '1' during out-of-service periods.
'busyIdle' = MK_SP = A and B bits are forced to '1' for
2.5 seconds; then they are switched to '0'
until out-of-service condition disappears.
'idleBusy' = SP_MK = A and B bits are forced to '0' for
2.5 seconds; then they are switched to '1'
until out-of-service condition disappears.
- for T1: '0'=0 ; '1'=1
- for E1: '0'=1 ; '1'=0
Context
- MIB
- RAD-Mpmx-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtMl4CnfgEntry
- Table
- prtMl4CnfgTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | notSupported |
3 | forcedIdle |
4 | forcedBusy |
5 | busyIdle |
6 | idleBusy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtMl4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. The write operation is valid only
to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 |
| prtMl4IpAddress IP Address of the port. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.10 |
| prtMl4IpMask IP subnet mask of the port. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.11 |
| prtMl4SignalingMode Refers to the signaling mode of the port (or framer module).
notApplicable(1)- means that no framer is needed for this port (no signaling),
or that this object is not relev… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.12 |
| prtMl4EchoCanceler Echo canceler activation. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.13 |
| prtMl4OosErrorSource OOS (Out-of-Service) Error Source.
This object is applicable for T1 ports only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.14 |
| prtMl4OosEntryThreshold This object defines the number of Errors per Second that determine the
minimum unacceptable noise level. This value will be the Entry Threshold
to the OOS (Out-of-Service) state.… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.15 |
| prtMl4OosExitThreshold This object defines the number of consecutive Error-Free-Seconds before
going from OOS state to Normal state. This value will be the Exit Threshold
from the OOS (Out-of-Service) s… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.16 |
| prtMl4LogicalLinkId This object defines for a V5.2 Master ML the Logical Link Id.
Valid values are: 0..256.
NA=257. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.17 |
| prtMl4DedicatedTs A unique number to identify Dedicated TS of the E1 port (V5.2).
It is applicable only when prtMl4Service=v52Slave and
prtExPh1MlInbandMng selected is dedicatedTs, dedicatedPpp or… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.18 |
| prtMl4RemCrc This object indicates whether the E1 of the Remote device
connected to this E1 port, will have CRC-4 or not. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.19 |
| prtMl4SltIdx This attribute indicates a unique slot position where
the module is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 |
| prtMl4CrossConnectLevel This object indicates whether the cross connect is
on DS1 or DS0 (time-slots) level.
When cross connect level is ds1, Destination Slot
is indicated by prtGenCnfgLinkToSlot,
De… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.20 |
| prtMl4PppEchoFailDetection This object indicates whether the PPP Echo is taken into account
for its Fail Detection.
This object is relevant when Inband Mng between devices is Dedicated TS PPP.
Default=Dis… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.21 |
| prtMl4EcanCasControl This object enables/disables ECAN (Echo Canceller) control activation/deactivation
sent via the A, B, C, D multiframe signaling BITs. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.22 |
| prtMl4PrtIdx This attribute indicates a unique port number. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 |
| prtMl4SigProfile This object indicates the Signaling Profile of the port.
none - when the Frame is G732N (no MF) or Unframed.
p1 = profile 1
p2 = profile 2
p3 = profile 3
p4 = profile 4
p5 = … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 |
| prtMl4CGA This object selects the method used to signal the CGA state
to the other end, through the main link.
'none' - non-transparent mode. When one of the links
(main) will be… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 |
| prtMl4VoiceOos Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0. | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 |
| prtMl4DataOos Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0. | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 |
| prtMl4Service Link Service.
leasedLine - usual TDM interface.
v51 - V5.1 interface.
v52Master - V5.2 Link to Local Exchange.
v52Slave - a ML that is transferred to the v52Master. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 |