prtExPhPlLXoff

RAD-Mpmx-MIB · .1.3.6.1.4.1.164.3.2.3.2.3.1.1.21

Object

column r/w SNMPv2-SMIInteger32

This attribute indicates the character used as X-Off to
notify receive disable.
This parameter is valid only for async protocols.
Valid values: 0..255.
The value 256 indicates that it's not applicable

Context

MIB: RAD-Mpmx-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.3.1.1.21
Type: column
Access: readwrite
Status: current
Parent: prtExPhPlCnfgEntry
Table: prtExPhPlCnfgTable
Siblings: 34

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtExPhPlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.1`
prtExPhPlDceClkSrc This attribute indicates the source of the clock when working in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.10`
prtExPhPlCongResponse This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/received becn to/from the network). no …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.11`
prtExPhPlCongLevel This attribute indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the para…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.12`
prtExPhPlTc This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.13`
prtExPhPlFlowControl This attribute indicates the required flow control betweeen the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,dtrCts - are valid on…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.14`
prtExPhPlDcdRts Protocol may require end to end connect indication over the network. End to end link connection establishment over the FR network will be indicated to the user by using DCD or RTS…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.15`
prtExPhPlDcdRtsControlPath Protocol may require end to end connect indication over the network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and forward it to the ne…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.16`
prtExPhPlDataBits This attribute indicates the number of data bits in async frame. It is relevant only for Async protocols.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.17`
prtExPhPlParity This attribute indicates the parity operation mode in async frame. It is relevant only for Async protocols.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.18`
prtExPhPlStopBits This attribute indicates the minimum number of stop bits in the tx async frame. It is relevant only for Async protocols.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.19`
prtExPhPlSltIdx This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.2`
prtExPhPlLXon This attribute indicates the character used as X-On to notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value 256 indicates that …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.20`
prtExPhPlFrMngProt This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. Wh…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.22`
prtExPhPlEnqPeriod This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines …	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.23`
prtExPhPlFullRptPeriod This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : S…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.24`
prtExPhPlFrWindowSize This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols A…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.25`
prtExPhPlErrorsThreshold This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This p…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.26`
prtExPhPlPvcCreateMsg This object is Update Message (if required or not). It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This parameter is applicable …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.27`
prtExPhPlCllmMsg This object is CLLM Message (if required or not). It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This parameter is applic…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.28`
prtExPhPlProtDelayLevel This object is the Segmentation in Bytes. In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 M…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.29`
prtExPhPlPrtIdx This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.3`
prtExPhPlClockEncoding This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. For MAXCESS 3000 & MP2100H: when setting to nrzI (3) the nrzI works as nr…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.30`
prtExPhPlMinSeparators Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.31`
prtExPhPlCcittCrc This object indicates how many Bits are used for CRC (HDLC item).	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.32`
prtExPhPlFrameSeparator This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.33`
prtExPhPlIdleCode Determines the code for transmission when there are no frames to transmit on the line. The value should be 0 to FFH.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.34`
prtExPhPlJitter Maximum variant delay of the FR network, in msec.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.35`
prtExPhPlConnect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.4`
prtExPhPlHRate This attribute indicates the port speed for HIGH speed cards. The card has limitations about the maximum sigma channel speeds and about the possible rates for each clock mode . N …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.5`
prtExPhPlLRate This attribute indicates the port speed for LOW speed cards. The card has limitations about the possible rates for each clock mode. N - The rate is valid for DCE and EXT-DCE Nodal…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.6`
prtExPhPlProtocol This object indicates the applied protocol.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.7`
prtExPhPlConnectionTyp This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network management. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.8`
prtExPhPlClkMode Clock mode.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.3.1.1.9`