prtExPhPlDataBits
RAD-Mpmx-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.17
Object
column
r/w
Enumeration
This attribute indicates the number of data bits in async frame. It is relevant only for Async protocols.
Context
- MIB
- RAD-Mpmx-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtExPhPlCnfgEntry
- Table
- prtExPhPlCnfgTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | dataBits7Bits |
3 | dataBits8Bits |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExPhPlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 |
| prtExPhPlDceClkSrc This attribute indicates the source of the clock when working
in dce or ext-dce clock mode.
notApplicable(1) - is applied for dte(3) and lbt(5) clock modes.
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.10 |
| prtExPhPlCongResponse This attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example
transmit/received becn to/from the network).
no … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.11 |
| prtExPhPlCongLevel This attribute indicates the level of delayed data in
precents of total available dynamic memory,
for which the port will start to operate as congested.
The resolution of the para… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.12 |
| prtExPhPlTc This attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested.
The value of this parameter is identical for all the ports
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.13 |
| prtExPhPlFlowControl This attribute indicates the required flow control betweeen
the port and the remote equipment.
fecnBecn - is valid only for FR, FR+ and CR protocols.
xonXoff,dtrCts - are valid on… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.14 |
| prtExPhPlDcdRts Protocol may require end to end connect indication over the
network. End to end link connection establishment over the
FR network will be indicated to the user by using DCD or
RTS… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.15 |
| prtExPhPlDcdRtsControlPath Protocol may require end to end connect indication over the
network. This parameter defines whether to take the user
connection status (RTS(DCE)/DCD(DTE)) and forward it to the
ne… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.16 |
| prtExPhPlParity This attribute indicates the parity operation mode in
async frame.
It is relevant only for Async protocols. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.18 |
| prtExPhPlStopBits This attribute indicates the minimum number of stop bits
in the tx async frame.
It is relevant only for Async protocols. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.19 |
| prtExPhPlSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 |
| prtExPhPlLXon This attribute indicates the character used as X-On to
notify receive enable.
This parameter is valid only for async protocols.
Valid values: 0..255.
The value 256 indicates that … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.20 |
| prtExPhPlLXoff This attribute indicates the character used as X-Off to
notify receive disable.
This parameter is valid only for async protocols.
Valid values: 0..255.
The value 256 indicates tha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.21 |
| prtExPhPlFrMngProt This object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value).
This parameter is applicable only for FR and FR+ protocols.
Wh… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.22 |
| prtExPhPlEnqPeriod This object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message
as sent by the FR user side.
At the FR network side, it determines … | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.23 |
| prtExPhPlFullRptPeriod This object is the Full Report Frequency.
It determines the number of the Status Enquiry messages
sent by the FR user side, before a Full Report Request is
sent.
The units are : S… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.24 |
| prtExPhPlFrWindowSize This object is the FR Window Size.
It determines the number of samplings in the sliding window
that counts the errors.
This parameter is applicable only for FR and FR+ protocols
A… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.25 |
| prtExPhPlErrorsThreshold This object is the Max Errors.
It determines the number of Status Enquiry Errors that
occured within the FR sliding window, before this port is
considered DOWN (threshold).
This p… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.26 |
| prtExPhPlPvcCreateMsg This object is Update Message (if required or not).
It determines whether a message of a New PVC Creation is
requested or not (yes/no).
Default = no.
This parameter is applicable … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.27 |
| prtExPhPlCllmMsg This object is CLLM Message (if required or not).
It determines whether to send (or not) a congestion message
when the port is Rx congested.
Default = no.
This parameter is applic… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.28 |
| prtExPhPlProtDelayLevel This object is the Segmentation in Bytes.
In some cases, the enumerated values will mean
other segmentation values than specified:
Product: MX-3000 M… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.29 |
| prtExPhPlPrtIdx This attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 |
| prtExPhPlClockEncoding This object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols.
For MAXCESS 3000 & MP2100H: when setting to nrzI (3) the nrzI works
as nr… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.30 |
| prtExPhPlMinSeparators Minimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicable | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.31 |
| prtExPhPlCcittCrc This object indicates how many Bits are used for CRC (HDLC item). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.32 |
| prtExPhPlFrameSeparator This object indicates what should be transferred on the line when there
are no frames to pass (HDLC item).
idles: mean that FF will pass on the line
flags: mean that 7E will pass … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.33 |
| prtExPhPlIdleCode Determines the code for transmission when there are no frames to transmit
on the line. The value should be 0 to FFH. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.34 |
| prtExPhPlJitter Maximum variant delay of the FR network, in msec. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.35 |
| prtExPhPlConnect This attribute indicates whether the port should be considered
in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.4 |
| prtExPhPlHRate This attribute indicates the port speed for HIGH speed cards.
The card has limitations about the maximum sigma channel
speeds and about the possible rates for each clock mode .
N … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.5 |
| prtExPhPlLRate This attribute indicates the port speed for LOW speed cards.
The card has limitations about the possible rates for each
clock mode.
N - The rate is valid for DCE and EXT-DCE Nodal… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.6 |
| prtExPhPlProtocol This object indicates the applied protocol. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.7 |
| prtExPhPlConnectionTyp This attribute indicates the link connection type.
It is required for three reasons:
FR/CR Inband management opration (LMI,CLMM...).
CIR check.
NMS network management.
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.8 |
| prtExPhPlClkMode Clock mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.9 |