ringLineErrCnt
RAD-MIB ·
.1.3.6.1.4.1.164.1.1.2.5
Object
scalar
SNMPv2-SMICounter32
This counter is incremented when a frame or token is copied or repeated by any of the stations on the ring, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the frame or token, or 2) there is an FCS error in the frame.
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Object Constraints
range: 1-100
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ringResetStatistics Setting the value of this attribute to ON(3) resets all the inband
statistics and error counters. | scalar | Enumeration | .1.3.6.1.4.1.164.1.1.2.1 |
| ringACFCErr This counter is incremented when any of the stations
on the ring receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.10 |
| ringTotErrCnt The total of the above described errors | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.1.1.2.11 |
| ringTotErr The total of the above described errors | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.12 |
| ringTotErrThreshold The threshold value of the total of the above described errors.When the threshold is reached
a trap indicating the status of the ring (SOFT ERROR)will be sent to the management s… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.13 |
| ringStatus Describes the status of the LAN segment the agent is attached to:
Normal(2) - The LAN segment is operating normally
SoftError(3) - The Token ring LAN segment (ring) is experiencin… | scalar | Enumeration | .1.3.6.1.4.1.164.1.1.2.14 |
| ringConfigMsg Full configuration message coded in internal RAD application format.
This entry describes ring information. | scalar | OctetString | .1.3.6.1.4.1.164.1.1.2.15 |
| ringCurrentTrafficCnt Momentary traffic for the last time interval. The traffic is expressed as bits per second. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.1.1.2.16 |
| ringCurrentTraffic Momentary traffic for the last time interval. The traffic is expressed in
percents of the maximum Tokenring traffic . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.2 |
| ringPeakTraffic Maximal traffic value since last reset of Agent or statistics.
Expressed in percents of the maximum Tokenring traffic. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.3 |
| ringTrafficTreshold Traffic threshold value. When reached, a trap will be sent to the management
console. Expressed in percents of the maximum Tokenring traffic | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.4 |
| ringLineErr This counter is incremented when a frame
or token is copied or repeated by any of the
stations on the ring, the E bit is zero in the frame
or token and one of the following
condit… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.6 |
| ringBurstErrCnt This counter is incremented when any of the stations
on the ring detects the absence of transitions for five
half-bit timers (burst-five error). | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.1.1.2.7 |
| ringBurstErr This counter is incremented when any of the stations
on the ring detects the absence of transitions for five
half-bit timers (burst-five error). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.1.2.8 |
| ringACFCErrCnt This counter is incremented when any of the stations
on the ring receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.1.1.2.9 |