ds1ExcessiveFrameSlipTrap
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.4.0.15
Object
notification
This trap indicates that the number of Frame Slips detected at the user DS1 interface, during the last minute exceeds threshold. For LA-110, threshold value is 10. This usually indicates timing problems (incorrect selection of timing reference) on the user DS1.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.4.0.15- Type
- notification
- Status
- current
- Parent
- prtDS1Events
- Siblings
- 20
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ds1LocalMultiframeAlarmTrap This trap indicates near end (Local) Loss of
Multiframe Alignment, of the user E1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.1 |
| ds1AisSyncLossTrap This trap indicates near end (Local)
Loss of Frame Alignment (Sync Loss), caused by the reception
of AIS at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.10 |
| ds1AisTrap This trap indicates AIS being received
at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.11 |
| ds1NetworkRemoteLoopTrap This trap indicates that a remote loopback
has been activated, on the local uplink interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.12 |
| ds1RemoteLoopTrap This trap indicates that a remote loopback
has been activated, on the local user port. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.13 |
| ds1LocalLoopTrap This trap indicates that a local loopback
has been activated on the user port. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.14 |
| ds1ExcessiveCrc4ErrorTrap This trap indicates that the error rate
detected on the CRC-4 bits at the
user DS1 interface, is high. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.16 |
| ds1ExcessiveLocalMfAlarmTrap This trap indicates that the number of local
Loss of Multiframe Alignment events, detected at
the user E1 interface during the last minute exceeds threshold.
For LA-110, threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.17 |
| ds1ExcessiveRemoteMfAlarmTrap This trap indicates that the number of
Loss of multiframe alignment events reported
by the remote unit connected to the user
E1 interface during the last minute exceeds threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.18 |
| ds1ExcessiveRemoteSyncLossTrap This trap indicates that the number of far end
(remote) Loss of Synchronization alarms,
reported by the user DS1 interface
during the last minute, exceeds threshold.
For LA-110… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.19 |
| ds1RemoteMultiframeAlarmTrap This trap indicates that the far end (remote) unit,
connected to the user E1 interface, reports
Loss of Multiframe Alignment. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.2 |
| ds1ExcessiveLocalSyncLossTrap This trap indicates that the number of
Loss of local Synchronization alarms
reported by the user DS1 interface
during the last minute, exceeds threshold.
For LA-110, threshol… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.20 |
| ds1SignalLossTrap This trap indicates Signal Loss.
(possible reason - cable disconnection. etc.) | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.21 |
| ds1LinkFrameSlipTrap This trap indicates that a Frame Slip occurred at the user
DS1 interface. This usually indicates timing problems
(incorrect selection of timing reference),
on the user DS1 lin… | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.3 |
| ds1BpvErrorTrap This trap indicates a Bipolar Violation (BPV)
error has been detected at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.4 |
| ds1ExcessiveBpvTrap This trap indicates excessive number of
Bipolar Violation errors (BPV)
detected by the user DS1 interface | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.5 |
| ds1Crc4ErrorTrap This trap indicates that a frame with CRC-4 error has been
detected at the user DS1 interface. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.6 |
| ds1ExcessiveErrorRatioTrap This trap indicates that the error rate, detected
at the user DS1 interface, on the frame synchronization bits
is high, as defined by ITU-T Rec. G.732. | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.7 |
| ds1RemoteSyncLossTrap This trap indicates that the far-end (remote)
unit, connected to user DS1 interface,
reports Loss of Frame Alignment (Sync Loss). | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.8 |
| ds1LocalSyncLossTrap This trap indicates near end (Local)
Loss of Frame Alignment failure (Sync Loss),
of the user DS1 interface | notification | - | .1.3.6.1.4.1.164.3.1.6.4.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lanrangerLinkConnPhysLink The lanrangerLinkIndex for the physical link with which this logical link is associated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.2.3.1.1 |
| lanrangerLinkConnAid A unique value for each logical link. The maximum number
of logical links is 256, according to the LANRANger model.
The value for each logical link must remain constant at lea… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.2.3.1.2 |