atmSysPSunits
RAD-MIB ·
.1.3.6.1.4.1.164.12.3.1.2.2
Object
scalar
SNMPv2-SMIInteger32
The number of power supply units.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.3.1.2.2- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- atmNteSysInfo
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmNteIdTable The IDs of the cards and of the system. | table | - | .1.3.6.1.4.1.164.12.3.1.2.1 |
| atmNteIntervalMaxNumber The MAX number of connections intervals supported by system.
This parameter value is a function of atmNteConnectionsMaxNumber
parameter.
This parameter should affect the threshol… | scalar | Integer32 | .1.3.6.1.4.1.164.12.3.1.2.10 |
| atmNteAlarmType This object specifies the type of the alarm. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.11 |
| atmNteLevel This object specifies the ATM level. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.12 |
| atmNteConnectionsNumber This object specifies a quantity of connections. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.13 |
| atmNteTotalLb This parameter counts the total number of end-points
that were configured with Loopback (LB). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.14 |
| atmNteTotalCc This parameter counts the total number of end-points
that were configured with Continuity Check (CC). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.15 |
| atmNteTotalPm This parameter counts the total number of end-points
that were configured with PM. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.16 |
| atmSysPSunitsInUse The main power supply in this unit. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.3 |
| atmSysFanUnits The number of fan units. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.4 |
| atmSysNetPrts The number of network ports. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.2.5 |
| atmSysNetPrtInUse The network port in use. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.6 |
| atmNteBridgingMode Bridging mode can be one of the following:
ATM <> Ethernet - Bridging is between the Ethernet
port and the ATM port (there is no bridging between VCs).
ATM <> Ethernet + ATM - B… | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.7 |
| atmSysStats | node | - | .1.3.6.1.4.1.164.12.3.1.2.8 |
| atmNteEventType This parameter identifies the event.
On - the problem exist.
Off - the problem not exist.
InvalidLogin - Invalid login on local console.
CorrectLogin - Successful login operation. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.2.9 |