atmSuSystemSwOperStatus
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.1.1
Object
scalar
r/w
Enumeration
This value indicates if tftp_write operation (for downloading software from an external host) is allowed by the agent.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- atmSuSystem
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noOperation |
1 | noAck |
2 | ack |
3 | delete |
4 | delete-all |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmSuSystemISDNDataLinkActivation This attribute indicates data link aactivation for all
ISDN ports in the system.
nonPermanent (2) = non permanent data link activation
permanent (3) = permanent data link ac… | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.10 |
| atmSuSystemJitterBuffer The field is set in ms and sets the jitter buffer size.
The jitter buffer adapts the size of the LA140 traffic
to the cdv (cell delay variation) of the ATM network. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.1.11 |
| atmSuSystemOperMode The field indicates device mode of operation:
ima (2) = Inverse Multiplex ATM - ATM traffic is
distributed between links in IMA group.
miniDSLAM (3) => each link s… | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.12 |
| atmSuSystemDSPGain This object indicates DSP Gain.
Range of possible values is -12....12.
For LA-110 suset of this range is supported. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.1.13 |
| atmSuSystemBundlesApplication This object defines application of each bundle .
each bundle is represented by two bits:
00 - TDM over ATM
01 - Frame Relay.
bit 0,1 represents bundle 1
but 2,3 represents bundle … | scalar | OctetString | .1.3.6.1.4.1.164.12.4.1.14 |
| atmSuSystemMsOperMode The field indicates device mode of operation:
msOverAtm (2) = Multi Service over ATM.
msOverPsn (3) = Multi Service over PSN (using Pseudo Wires) | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.15 |
| atmSuSystemPwTransportLayer The field indicates device pseudo wire Transport Layer,
when atmSuSystemMsOperMode = msOverPsn. | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.16 |
| atmSuSystemSwSwitchVersionsCmd This command is used to switch beetween software versions stored
in the flash. setting this value to active will reset the agent
and re-activate it with the new version ( only if … | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.2 |
| atmSuSystemHistoryAlrTable buffer contain history buffer of agent alarms. | table | - | .1.3.6.1.4.1.164.12.4.1.3 |
| atmSuSystemClearHistoryAlrListCmd Setting this attribute to ON, enforce a clear operation on
the agent history event buffer .
On reading, attribute will always get status 'off' . | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.4 |
| atmSuSystemCurrentAlrTable table which contains all alarms Currently active ( status ON )
in the agent. | table | - | .1.3.6.1.4.1.164.12.4.1.5 |
| atmSuSystemILMICommunity Community string for ILMI requests. 10 chars. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.12.4.1.6 |
| atmSuSystemTrapMaxManagers The maximum number of managers that can be registered
for receiving traps and sending requests. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.1.7 |
| atmSuSystemAalSelection Select ATM adaptation layers AAL1 or AAL2
Applicable for LA-140 | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.8 |
| atmSuSystemCodingLaw This attribute indicates the Method/Law for decoding/encoding the voice
information.
aLaw (2) is the standard Law for E1 links.
uLaw (3) is the standard Law for T1 links.
… | scalar | Enumeration | .1.3.6.1.4.1.164.12.4.1.9 |