agnSAlrTable

RAD-MIB · .1.3.6.1.4.1.164.3.1.2.1.15

Object

table

List of agent related alarms and indications for alarms at
system level.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.1.2.1.15
Type: table
Status: current
Parent: statAgnGen
Siblings: 21
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

Enumerated Values

`2`	noReport
`3`	event
`4`	minor
`5`	major
`6`	warning
`7`	critical

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agnSDateFormat This entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report.	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.1`
agnSAlrStatus Indicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) critical alar…	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.10`
agnSAlrStatusAll Indicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical alarm, …	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.11`
agnSMaskedAlrStat Indicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least one active (state ON…	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.12`
agnSMaskedAlrStatAll Indicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one active (state ON) …	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.13`
agnSTstStatAll on(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2).	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.14`
agnSClearAlrCmd Setting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. The clear operation …	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.16`
agnSClearAllAlrCmd Setting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applied for masked/inverte…	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.17`
agnSSanityCheckStatus Upon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly some warnin…	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.18`
agnSNoOfSanityCheckErr This entry indicates the number of errors/warnings discovered by the last SanityCheck process.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.1.19`
agnSDateCmd This entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This parameter can be set…	scalar	OctetString	`.1.3.6.1.4.1.164.3.1.2.1.2`
agnSErrListTable List of errors and warnings found during Sanity Check process.	table	-	`.1.3.6.1.4.1.164.3.1.2.1.20`
agnSMaxNoOfCnfg Maximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.1.21`
agnSCnfgTable This table contains an entry per configuration. It indicates if the configuration is valid.	table	-	`.1.3.6.1.4.1.164.3.1.2.1.22`
agnSTimeCmd This entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the NMS and the Agent.	scalar	OctetString	`.1.3.6.1.4.1.164.3.1.2.1.3`
agnSActiveCnfg This entry specifies the unique identifier of the configuration, that is currently active and running.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.1.4`
agnSEditCnfg This entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 means no…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.1.5`
agnSLastCnfgFlipTime This entry indicates the Date & Time of the last flip to the current configuration at the agent.	scalar	OctetString	`.1.3.6.1.4.1.164.3.1.2.1.6`
agnSLastCnfgFlipCause This entry describes the flip's cause.	scalar	OctetString	`.1.3.6.1.4.1.164.3.1.2.1.7`
agnSEditBy This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(load) operation.	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.8`
agnSClkSrc This entry indicates the source of the system clock.	scalar	Enumeration	`.1.3.6.1.4.1.164.3.1.2.1.9`

Child Objects