l3SatPeerScope
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.12.1.19
Object
column
Bits
The scope of the test: configuration phase, performance phase, or both phases. This object is a copy of the corresponding object in the peer profile. The duplication is done to keep the report valid even if the peer profile was modified after the test completion.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.12.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- l3SatPeerEntry
- Table
- l3SatPeerTable
- Siblings
- 20
Syntax
Bits
Values & Constraints
Enumerated Values
0 | configuration |
1 | performance |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatPeerAddrType The type of IP address of the L3 SAT peer. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.12.1.1 |
| l3SatPeerResponderType The discovered type of the responder.
If the peer was never activated the value unknown(1) is returned. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.10 |
| l3SatPeerMtu The discovered IP MTU of the path to the responder.
If the peer was never activated the value zero is returned. | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.11 |
| l3SatPeerStartTime The date and time at the last peer activation.
If the peer was never activated a null value is returned. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.1.15.2.12.1.12 |
| l3SatPeerEndTime The date and time when the last test was ended (regardless of the end
result passed/failed/aborted).
If a test is in progress or the peer was never activated a null… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.1.15.2.12.1.13 |
| l3SatPeerTimeElapsed For an in progress test - the elapsed time of the current test.
For a completed test - the duration of the last test.
If the peer was never activated a zero value i… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.14 |
| l3SatPeerOutOfSyncSeconds The number of seconds there was no TOD synchronization with the
responder device.
If the peer was never activated a zero value is returned. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.15 |
| l3SatPeerOverAllResult The overall result of the last test.
The value notApplicable(1) is returned in the following cases:
- The test is currently in progress.
- The peer was never activa… | column | RAD-TCRadTestResult | .1.3.6.1.4.1.164.6.1.15.2.12.1.16 |
| l3SatPeerConfDuration The duration of the configuration phase.
This duration is used for each test session.
This object is a copy of the corresponding object in the peer profile.
The dup… | column | seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.17 |
| l3SatPeerPerfDuration The duration of the performance phase.
This object is a copy of the corresponding object in the peer profile
and is used for availability calculation.
The duplicati… | column | minutes Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.18 |
| l3SatPeerAddr The IP address of the L3 SAT peer. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.12.1.2 |
| l3SatPeerConnectivityResult The result of the last connectivity sub-test.
The value notApplicable(1) is returned in the following cases:
- The sub-test is currently in progress.
- The peer was… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.20 |
| l3SatPeerMtuTestResult The result of the last MTU sub-test.
The value notApplicable(1) is returned in the following cases:
- The sub-test is currently in progress.
- The peer was never ac… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.21 |
| l3SatPeerRowStatus This object enables creation and deletion of L3 SAT peers. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.12.1.3 |
| l3SatPeerProfile The profile used for the peer parameters. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.12.1.4 |
| l3SatPeerCmd A command to activate or de-activate the test at the generator side.
If sanity checks prevent the test activation then a set to start(1)
shall be rejected with an S… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.5 |
| l3SatPeerConfChanged Indication whether the configuration of the peer was changed after
the test was completed.
The configuration of the peer, in this context, includes the
following:
-… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.6.1.15.2.12.1.6 |
| l3SatPeerTimeRemaining The time remaining till the end of the test.
If the peer is not active a value of zero is returned. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.7 |
| l3SatPeerCurrentPhase The current phase of the test.
If the peer is not active the value idle(1) is returned. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.8 |
| l3SatPeerTodStatus The current TOD synchronization state with the responder device.
The value unknown(1) is returned if the generator device is connected
to an NTP server but the peer… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.9 |