l3SatPeerCmd
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.12.1.5
Object
column
r/w
Enumeration
A command to activate or de-activate the test at the generator side.
If sanity checks prevent the test activation then a set to start(1)
shall be rejected with an SNMP error.
Upon successful activation of a test:
- Existing corresponding rows in the l3SatReportTable shall be
automatically deleted.
- Corresponding rows shall be automatically created/re-created in
the l3SatReportTable.
- The value of the object l3SatPeerConfChanged shall be set
to false(2).
- For all the underlying test sessions the value of the object
l3SatSessionConfChanged shall be set to false(2).
This object is volatile i.e. it returns to default value after NE reset.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.12.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- l3SatPeerEntry
- Table
- l3SatPeerTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | stop |
2 | start |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatPeerAddrType The type of IP address of the L3 SAT peer. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.12.1.1 |
| l3SatPeerResponderType The discovered type of the responder.
If the peer was never activated the value unknown(1) is returned. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.10 |
| l3SatPeerMtu The discovered IP MTU of the path to the responder.
If the peer was never activated the value zero is returned. | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.11 |
| l3SatPeerStartTime The date and time at the last peer activation.
If the peer was never activated a null value is returned. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.1.15.2.12.1.12 |
| l3SatPeerEndTime The date and time when the last test was ended (regardless of the end
result passed/failed/aborted).
If a test is in progress or the peer was never activated a null… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.1.15.2.12.1.13 |
| l3SatPeerTimeElapsed For an in progress test - the elapsed time of the current test.
For a completed test - the duration of the last test.
If the peer was never activated a zero value i… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.14 |
| l3SatPeerOutOfSyncSeconds The number of seconds there was no TOD synchronization with the
responder device.
If the peer was never activated a zero value is returned. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.15 |
| l3SatPeerOverAllResult The overall result of the last test.
The value notApplicable(1) is returned in the following cases:
- The test is currently in progress.
- The peer was never activa… | column | RAD-TCRadTestResult | .1.3.6.1.4.1.164.6.1.15.2.12.1.16 |
| l3SatPeerConfDuration The duration of the configuration phase.
This duration is used for each test session.
This object is a copy of the corresponding object in the peer profile.
The dup… | column | seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.17 |
| l3SatPeerPerfDuration The duration of the performance phase.
This object is a copy of the corresponding object in the peer profile
and is used for availability calculation.
The duplicati… | column | minutes Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.18 |
| l3SatPeerScope The scope of the test: configuration phase, performance phase, or both
phases.
This object is a copy of the corresponding object in the peer profile.
The duplication is done to ke… | column | Bits | .1.3.6.1.4.1.164.6.1.15.2.12.1.19 |
| l3SatPeerAddr The IP address of the L3 SAT peer. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.12.1.2 |
| l3SatPeerConnectivityResult The result of the last connectivity sub-test.
The value notApplicable(1) is returned in the following cases:
- The sub-test is currently in progress.
- The peer was… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.20 |
| l3SatPeerMtuTestResult The result of the last MTU sub-test.
The value notApplicable(1) is returned in the following cases:
- The sub-test is currently in progress.
- The peer was never ac… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.21 |
| l3SatPeerRowStatus This object enables creation and deletion of L3 SAT peers. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.12.1.3 |
| l3SatPeerProfile The profile used for the peer parameters. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.12.1.4 |
| l3SatPeerConfChanged Indication whether the configuration of the peer was changed after
the test was completed.
The configuration of the peer, in this context, includes the
following:
-… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.6.1.15.2.12.1.6 |
| l3SatPeerTimeRemaining The time remaining till the end of the test.
If the peer is not active a value of zero is returned. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.12.1.7 |
| l3SatPeerCurrentPhase The current phase of the test.
If the peer is not active the value idle(1) is returned. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.8 |
| l3SatPeerTodStatus The current TOD synchronization state with the responder device.
The value unknown(1) is returned if the generator device is connected
to an NTP server but the peer… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.12.1.9 |