qtechPimJoinPruneInterval
QTECH-PIM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.1
Object
The default interval at which periodic PIM-SM Join/Prune messages are to be sent.
Context
- MIB
- QTECH-PIM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- qtechPim
- Siblings
- 14
Syntax
seconds SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechPimStateRefreshLimitInterval This router will not forward successive State Refresh
messages received at less than this interval. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.10 |
| qtechPimStateRefreshTimeToLive The TTL to be used by this router's originated State
Refresh messages if the data packet's TTL is not
recorded. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.11 |
| qtechPimBsrCandidateGroup | node | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.12 |
| qtechPimRPTable The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13 |
| qtechPimStaticRPTable The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14 |
| qtechPimRpCandidateTable The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero. … | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15 |
| qtechPimInterfaceTable The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2 |
| qtechPimNeighborTable The (conceptual) table listing the router's PIM neighbors. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3 |
| qtechPimIpMRouteTable The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4 |
| qtechPimIpMRouteNextHopTable The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5 |
| qtechPimRPSetTable The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from r… | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6 |
| qtechPimComponentTable The (conceptual) table containing objects specific to a PIM
domain. One row exists for each domain to which the router
is connected. A PIM-SM domain is defined as an area of the… | table | - | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7 |
| qtechPimSourceLifetime The maximum time this router will continue to
originate State Refresh messages in the absence of
traffic from the source itself. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.8 |
| qtechPimStateRefreshInterval The interval between successive State Refresh
messages originated by this router. | scalar | seconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.9 |