qtechMplsOamIgrLspId
QTECH-MPLSOAM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.3
Object
column
r/w
Integer32
The ID of an LSP.
Context
- MIB
- QTECH-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qtechMplsOamIgrEntry
- Table
- qtechMplsOamIgrTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechMplsOamIgrIndex This is a unique index in the ingress table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.1 |
| qtechMplsOamIgrAvaState If the LSP Timer (T3) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.10 |
| qtechMplsOamIgrDefectType There are 6 types of defect in total, among which there are 4 MPLS layer user-plane
defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect,
1 peer… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.11 |
| qtechMplsOamIgrRowStatus It is used to create and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.12 |
| qtechMplsOamIgrLspName The name of an LSP(or te tunnel). | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.2 |
| qtechMplsOamIgrDetType The OAM defect detection function is based on the periodic transmission
of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet
carries a unique TTSI (Trai… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.4 |
| qtechMplsOamIgrDetFreq For CV: the frequency is 1s.
For FFD: the frequency is one of
50ms,100ms,200ms,500ms.
0: 1s(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.5 |
| qtechMplsOamIgrRevType The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR
(which is the source of the forward LSP) that there is a defect at the downstream LSP's… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.6 |
| qtechMplsOamIgrRevLspName The name of a return LSP. | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.7 |
| qtechMplsOamIgrEnable The detection of OAM is enabled/disabled on the ingress of an LSP.
0: The OAM detection is disabled on the ingress;
1: The OAM detection is enabled on the ingress. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.8 |
| qtechMplsOamIgrValid 0: stop detection of OAM;
1: start detection of OAM. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.9 |