qtechMplsOamIgrDetFreq

QTECH-MPLSOAM-MIB · .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.5

MIB view Table view

Object

column r/w Enumeration

For CV: the frequency is 1s.
For FFD: the frequency is one of 
50ms,100ms,200ms,500ms.
0: 1s(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms.

Context

MIB: QTECH-MPLSOAM-MIB
OID: .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.5
Type: column
Access: readwrite
Status: current
Parent: qtechMplsOamIgrEntry
Table: qtechMplsOamIgrTable
Siblings: 11

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	cv1000ms
`1`	ffd50ms2
`2`	ffd100ms3
`3`	ffd200ms4
`4`	ffd500ms5

Related Objects

Sibling Objects

Object	Type	Syntax	OID
qtechMplsOamIgrIndex This is a unique index in the ingress table.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.1`
qtechMplsOamIgrAvaState If the LSP Timer (T3) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP…	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.10`
qtechMplsOamIgrDefectType There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer…	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.11`
qtechMplsOamIgrRowStatus It is used to create and delete a row in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.12`
qtechMplsOamIgrLspName The name of an LSP(or te tunnel).	column	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.2`
qtechMplsOamIgrLspId The ID of an LSP.	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.3`
qtechMplsOamIgrDetType The OAM defect detection function is based on the periodic transmission of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet carries a unique TTSI (Trai…	column	Enumeration	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.4`
qtechMplsOamIgrRevType The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's…	column	Enumeration	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.6`
qtechMplsOamIgrRevLspName The name of a return LSP.	column	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.7`
qtechMplsOamIgrEnable The detection of OAM is enabled/disabled on the ingress of an LSP. 0: The OAM detection is disabled on the ingress; 1: The OAM detection is enabled on the ingress.	column	Enumeration	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.8`
qtechMplsOamIgrValid 0: stop detection of OAM; 1: start detection of OAM.	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.2.1.9`