upsParallelSysRedundancy

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.14.3
MIB view Table view

Object

scalar mandatory r/w Enumeration 
The redundancy warning level for paralleled UPS
nplus0 (1) indicates that there are no redundant units.
nplus1 (2) indicates that there is one redundant unit.
nplus2 (3) indicates that there are two redundant units.
nplus3 (4) indicates that there are three redundant units.
nplus4 (5) indicates that there are four redundant unit.
nplus5 (6) indicates that there are five redundant units.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.14.3
Type
scalar
Access
readwrite
Status
mandatory
Parent
upsParallelSystem
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
1nplus0
2nplus1
3nplus2
4nplus3
5nplus4
6nplus5

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsParallelSysLocalAddress mandatory
Defines the UPS ID number in the parallel system.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.1
upsParallelDiagSubSysBreakerTable mandatory
Allows for diagnostics of parallel Circuit Breakers.
table-.1.3.6.1.4.1.318.1.1.1.14.10
upsParallelOutputTotalPercentLoad mandatory
The percentage of the UPS total load capacity in kVA or -1 if it's unsupported by this UPS.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.11
upsParallelOutputActivePowerTable mandatory
A list of output table entries. The number of entries is given by the value of upsParallelSysRemoteAddress.
table-.1.3.6.1.4.1.318.1.1.1.14.12
upsParallelSysSwitchGearInstallationLoadPct mandatory
The actual output load expressed as a percentage of the rating of the Parallel UPS system.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.13
upsParallelSysRedundancyStatus mandatory
Displays the number of backup or redundant UPS devices set up on the parallel system. nplus0 (1) no redundant units. nplus1 (2) one redundant unit. nplus2 (3) two redundant units.…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.14.14
upsParallelSysName mandatory
An ID string for the group of UPS units in the same parallel system. Some products do not allow write operations for this OID.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.14.15
upsParallelSysUpsTableSize mandatory
The number of UPS devices in parallel.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.16
upsParallelSysUpsTable mandatory
A list of UPS table entries. The number of entries is given by the value of upsParallelSysUpsTableize.
table-.1.3.6.1.4.1.318.1.1.1.14.17
upsParallelNumOfUpsPoweringLoad mandatory
Number of UPS powered and protecting the load which are not defective (no battery fault, no internal fault).
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.18
upsParallelMinNumOfRequiredUps mandatory
Minimal number of UPS required to guarantee the availability of power.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.19
upsParallelSysRemoteAddress mandatory
Defines the total number of UPS devices in parallel.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.2
upsParallelInputMaximumCurrent mandatory
Maximum input RMS current of the parallel system measured in Amperes.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.4
upsParallelTotalOutputPower mandatory
The Total Output power of UPS in kW when UPS are configured in parallel or -1 if it's unsupported by this UPS.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.5
upsParallelTotalOutputApparentPower mandatory
The Total Output Apparent power of UPS in kVA when UPS are configured in parallel or -1 if it's unsupported by this UPS.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.14.6
upsParallelInputPhaseTable mandatory
A list of input table entries.
table-.1.3.6.1.4.1.318.1.1.1.14.7
upsParallelOutputPhaseTable mandatory
A list of output table entries. The number of entries is given by the sum of the upsPhaseNumOutputPhases.
table-.1.3.6.1.4.1.318.1.1.1.14.8
upsParallelOutputApparentPowerTable mandatory
A list of output table entries. The number of entries is given by the value of upsOutputNumPhases.
table-.1.3.6.1.4.1.318.1.1.1.14.9