upsParallelOutputPhaseTable

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.14.8

MIB view Table view

Object

table mandatory

A list of output table entries.  The number of
entries is given by the sum of the upsPhaseNumOutputPhases.

Context

MIB: PowerNet-MIB
OID: .1.3.6.1.4.1.318.1.1.1.14.8
Type: table
Status: mandatory
Parent: upsParallelSystem
Siblings: 18
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
upsParallelSysLocalAddress mandatory Defines the UPS ID number in the parallel system.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.1`
upsParallelDiagSubSysBreakerTable mandatory Allows for diagnostics of parallel Circuit Breakers.	table	-	`.1.3.6.1.4.1.318.1.1.1.14.10`
upsParallelOutputTotalPercentLoad mandatory The percentage of the UPS total load capacity in kVA or -1 if it's unsupported by this UPS.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.11`
upsParallelOutputActivePowerTable mandatory A list of output table entries. The number of entries is given by the value of upsParallelSysRemoteAddress.	table	-	`.1.3.6.1.4.1.318.1.1.1.14.12`
upsParallelSysSwitchGearInstallationLoadPct mandatory The actual output load expressed as a percentage of the rating of the Parallel UPS system.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.13`
upsParallelSysRedundancyStatus mandatory Displays the number of backup or redundant UPS devices set up on the parallel system. nplus0 (1) no redundant units. nplus1 (2) one redundant unit. nplus2 (3) two redundant units.…	scalar	Enumeration	`.1.3.6.1.4.1.318.1.1.1.14.14`
upsParallelSysName mandatory An ID string for the group of UPS units in the same parallel system. Some products do not allow write operations for this OID.	scalar	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.318.1.1.1.14.15`
upsParallelSysUpsTableSize mandatory The number of UPS devices in parallel.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.16`
upsParallelSysUpsTable mandatory A list of UPS table entries. The number of entries is given by the value of upsParallelSysUpsTableize.	table	-	`.1.3.6.1.4.1.318.1.1.1.14.17`
upsParallelNumOfUpsPoweringLoad mandatory Number of UPS powered and protecting the load which are not defective (no battery fault, no internal fault).	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.18`
upsParallelMinNumOfRequiredUps mandatory Minimal number of UPS required to guarantee the availability of power.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.19`
upsParallelSysRemoteAddress mandatory Defines the total number of UPS devices in parallel.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.2`
upsParallelSysRedundancy mandatory The redundancy warning level for paralleled UPS nplus0 (1) indicates that there are no redundant units. nplus1 (2) indicates that there is one redundant unit. nplus2 (3) indicates…	scalar	Enumeration	`.1.3.6.1.4.1.318.1.1.1.14.3`
upsParallelInputMaximumCurrent mandatory Maximum input RMS current of the parallel system measured in Amperes.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.4`
upsParallelTotalOutputPower mandatory The Total Output power of UPS in kW when UPS are configured in parallel or -1 if it's unsupported by this UPS.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.5`
upsParallelTotalOutputApparentPower mandatory The Total Output Apparent power of UPS in kVA when UPS are configured in parallel or -1 if it's unsupported by this UPS.	scalar	Integer32	`.1.3.6.1.4.1.318.1.1.1.14.6`
upsParallelInputPhaseTable mandatory A list of input table entries.	table	-	`.1.3.6.1.4.1.318.1.1.1.14.7`
upsParallelOutputApparentPowerTable mandatory A list of output table entries. The number of entries is given by the value of upsOutputNumPhases.	table	-	`.1.3.6.1.4.1.318.1.1.1.14.9`

Child Objects