upsAdvStateSystemMessages

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.11.2.6
MIB view Table view

Object

scalar mandatory RFC1213-MIBDisplayString 
An ASCII string containing the 3 digit Decimal code
representing the current active message from the
System Message Register. Each code should remain active
for a minimum of 15 seconds. However, in the worst case
scenario, a code could be cleared after only 5 seconds.
It is recommended that this object be polled at least
once every 4 seconds in order to get the most accurate
representation of the current UPS System Message. If the
Network Card is unable to determine the value of the
System Message Register, this variable is set to
'UNKNOWN'.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.11.2.6
Type
scalar
Access
readonly
Status
mandatory
Parent
upsAdvState
Siblings
15

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsAdvStateAbnormalConditions mandatory
An ASCII string containing the 32 flags representing the current active UPS faults. If the Network Card is unable to determine the values of the flags, this variable is set to 'UN…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.1
upsAdvStateNumberoftimesonbattery mandatory
Number of times the UPS was on battery. Since the last reset of statistical data.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.11.2.10
upsAdvStateNumberoftimesbypass mandatory
Number of times the UPS was in bypass. Since the last reset of statistical data.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.11.2.11
upsAdvStateNumberoftimesNormal mandatory
Number of times the UPS was in normal operation. Since the last reset of statistical data.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.11.2.12
upsAdvStateEcomode mandatory
Eco mode status. 1: UPS is on Eco-mode 2: UPS is not on Eco-mode.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.11.2.13
upsAdvStateLifeCycleManagement mandatory
An ASCII string containing the 16 flags representing the life cycle management alerts for the device. If the Network Card is unable to determine the values of the flags, this vari…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.14
upsAdvStateGalaxyVseriesSpecificFault optional
An ASCII string containing 32 flags representing current active faults on a Galaxy V series UPS. The upsAdvStateAbnormalConditions OID shall be used to report active faults as per…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.15
upsAdvStateGutorModularSpecificFaults optional
An ASCII string containing the 64 flags representing the current active Charger Rectifier and UPS specific faults for Gutor Modular models. Flag allocation: Flag 1 to 16 for break…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.16
upsAdvStateSymmetra3PhaseSpecificFaults mandatory
An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra 3-Phase UPS models. If the Network Card is unable to determine the val…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.2
upsAdvStateDP300ESpecificFaults mandatory
An ASCII string containing the 64 flags representing the current active UPS specific faults for the Silcon DP300E UPS models. If the Network Card is unable to determine the values…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.3
upsAdvStateSymmetraSpecificFaults mandatory
An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra UPS models. If the Network Card is unable to determine the values of t…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.4
upsAdvStateSmartUPSSpecificFaults mandatory
An ASCII string containing the 64 flags representing the current active UPS specific faults for the Smart-UPS UPS models. If the Network Card is unable to determine the values of …
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.5
upsAdvStateTotaltimeonbattery mandatory
Total time the UPS has been in battery operation.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.7
upsAdvStateTotaltimeonbypass mandatory
Total time the UPS has been in bypass operation.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.8
upsAdvStateTotaltimeonNormal mandatory
Total time the UPS has been in normal operation.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.11.2.9