upsAdvOutputInverterFrequency

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.4.2.14
MIB view Table view

Object

scalar mandatory RFC1155-SMIGauge 
Output frequency in Hz measured at the output of inverter.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.4.2.14
Type
scalar
Access
readonly
Status
mandatory
Parent
upsAdvOutput
Siblings
21

Syntax

RFC1155-SMIGauge
Source
RFC1155-SMIGauge
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsAdvOutputVoltage mandatory
The output voltage of the UPS system in VAC.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.4.2.1
upsAdvOutputStatisticsTable mandatory
A list of input table entries. The number of entries is given by the value of upsPhaseNumOutputs.
table-.1.3.6.1.4.1.318.1.1.1.4.2.10
upsAdvOutputNeutralCurrent mandatory
The neutral current in amperes.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.11
upsAdvOutputEnergyUsage mandatory
The output energy usage of the UPS in kWh.
scalarUnsigned32.1.3.6.1.4.1.318.1.1.1.4.2.12
upsAdvOutputSourceSynchronization mandatory
Indicates the synchronization source for the inverter output frequency. 1. Main 2. Internal 3. External 4. On AC Bypass. 5. External / On Bypass For other values it is unknown
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.13
upsAdvOutputInverterLoad mandatory
The total active power at the output of all inverter modules in percent of rated system power (% of kW) If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.15
upsAdvOutputPercentPower mandatory
The relative active power at the output of the inverter system (static switch output) in percent of rated system power (% of kW). If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.16
upsAdvOutputInverterActivePower mandatory
The total active power at the output of all inverter modules in kW. If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.17
upsAdvOutputPercentLoad mandatory
The relative apparent power at the output of the inverter system (static switch output) in percent of rated system load (% of kVA) If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.18
upsAdvOutputInverterCurrent mandatory
The current, in amperes, drawn by the load on the inverter.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.19
upsAdvOutputFrequency mandatory
The current output frequency of the UPS system in Hz.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.4.2.2
upsAdvOutputReactivePower mandatory
The total output reactive power of all phases of the UPS system in VAR. If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.20
upsAdvOutputInverterVoltage mandatory
The output voltage of the inverter in VAC.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.21
upsAdvOutputUpperAcceptPowerSettingPct mandatory
Upper acceptable voltage as percent of nominal voltage
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.22
upsAdvOutputLoad mandatory
The current UPS load expressed in percent of rated capacity.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.4.2.3
upsAdvOutputCurrent mandatory
The current in amperes drawn by the load on the UPS.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.4.2.4
upsAdvOutputRedundancy mandatory
The number of power modules which can fail or be removed without causing the UPS to generate a Minimum Redundancy Lost event.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.4.2.5
upsAdvOutputKVACapacity mandatory
The maximum load that this UPS can support. This value is dynamic for scalable 3-phase UPS devices where power modules can be added for increased capacity. The value indicates the…
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.6
upsAdvOutputNominalFrequency mandatory
The nominal output frequency of the UPS system in Hz.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.7
upsAdvOutputActivePower mandatory
The total output active power of the UPS system in W. The total active power is the sum of phase 1, phase 2 and phase 3 power.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.8
upsAdvOutputApparentPower mandatory
The total output apparent power of all phases of the UPS system in VA. If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.4.2.9