upsAdvBatteryTotalCapacity

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.2.2.25
MIB view Table view

Object

scalar mandatory RFC1155-SMIGauge 
The actual available battery capacity of the system expressed in ampere hours (Ah).
The value is updated continuously, for example when battery breakers are opened or closed,
or when battery strings/battery blocks are added or removed.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.2.2.25
Type
scalar
Access
readonly
Status
mandatory
Parent
upsAdvBattery
Siblings
26

Syntax

RFC1155-SMIGauge
Source
RFC1155-SMIGauge
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsAdvBatteryCapacity mandatory
The remaining battery capacity expressed in percent of full capacity. If not supported, return 0.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.2.2.1
upsAdvTotalDCCurrent mandatory
The total DC current in Amps.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.10
upsAdvBatteryFullCapacity mandatory
The full chargeable capacity of the battery which is expressed in percentage.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.11
upsAdvBatteryActualVoltageTable mandatory
A list of battery table entries. The number of battery frames present in UPS.
table-.1.3.6.1.4.1.318.1.1.1.2.2.12
upsAdvTotalDCCurrentTable mandatory
A list of Battery Frame table entries. The number of entries is given by the value of Number of Battery Frames.
table-.1.3.6.1.4.1.318.1.1.1.2.2.13
upsAdvBatteryCurrentTable mandatory
A list of Battery Frame table entries. The number of entries is given by number of Battery frames present.
table-.1.3.6.1.4.1.318.1.1.1.2.2.14
upsAdvBatteryEstimatedChargeTime mandatory
The estimated remaining time required to charge the UPS to a full state of charge. If not present return maximum value(4,294,967,295).
scalarRFC1155-SMITimeTicks.1.3.6.1.4.1.318.1.1.1.2.2.15
upsAdvBatteryPower mandatory
The measured battery power in kW.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.16
upsAdvBatteryChargerStatus mandatory
The status of the battery charger. If the UPS is unable to find the state of charger, this variable is set to unknown(1).
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.17
upsAdvBatteryInternalSKU mandatory
The SKU of the internal battery.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.2.2.19
upsAdvBatteryTemperature mandatory
The current internal UPS temperature expressed in Celsius. Temperatures below zero read as 0. Consider using upsHighPrecExtdBatteryTemperature instead. If not present …
scalarRFC1155-SMIGauge.1.3.6.1.4.1.318.1.1.1.2.2.2
upsAdvBatteryExternalSKU mandatory
The SKU of the external battery.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.2.2.20
upsAdvBatteryRecommendedReplaceDate mandatory
The recommended replacement date for the battery based on the UPS internal battery life algorithm.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.2.2.21
upsAdvBatteryNominalBackupTime mandatory
Defines the runtime of the user supplied battery in minutes, when battery is new.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.22
upsAdvBatteryCondition mandatory
Health of the battries based on the battery test.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.23
upsAdvBatteryChargingCurrentRestricted mandatory
Indicates whether battery charging current is restricted or not. The value of yes(1) indicates that battery charging current is restricted . The value of no(2) indicates that batt…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.24
upsAdvBatteryFuseStatus mandatory
If battery system has one common fuse for the battery system, the status is given by this value. 1 = Fuse Open 2 = Fuse Ok 3 = Not present
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.26
upsAdvBatteryBreakerStatus mandatory
The value indicates the aggregated status of the battery breakers in the system. disconnected(1) indicates none of the battery breakers are closed, and the battery system is disco…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.27
upsAdvBatteryWiringConfiguration mandatory
The value indicates the wiring configuration, whether the battery is 2-wire or 3-wire. If it's a 3-wire battery system, the system can have 2 voltages and currents per cabinet. 1 …
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.28
upsAdvBatteryRunTimeRemaining mandatory
The UPS battery run time remaining before battery exhaustion. If not present return maximum value(4,294,967,295).
scalarRFC1155-SMITimeTicks.1.3.6.1.4.1.318.1.1.1.2.2.3
upsAdvBatteryReplaceIndicator mandatory
Indicates whether the UPS batteries need replacing.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.2.2.4
upsAdvBatteryNumOfBattPacks mandatory
The number of external battery packs connected to the UPS. If the UPS does not use smart cells then the agent reports ERROR_NO_SUCH_NAME.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.5
upsAdvBatteryNumOfBadBattPacks mandatory
The number of external battery packs connected to the UPS that are defective. If the UPS does not use smart cells then the agent reports ERROR_NO_SUCH_NAME.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.6
upsAdvBatteryNominalVoltage mandatory
The nominal battery voltage in Volts.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.7
upsAdvBatteryActualVoltage mandatory
The actual battery bus voltage in Volts. If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.8
upsAdvBatteryCurrent mandatory
The battery current in Amps. If not supported, return -1.
scalarInteger32.1.3.6.1.4.1.318.1.1.1.2.2.9