rPDUIdentDeviceLinetoNeutralVoltage

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.12.1.19
MIB view Table view

Object

scalar mandatory r/w Integer32 
Getting/Setting this OID will return/set the Line to Neutral Voltage.
This OID defaults to the nominal line to neutral voltage in volts AC.
This setting is used to calculate total power and must be configured for best accuracy.
This OID applies only to AP7823. For all other models, the OID is fixed at 0.
          
The valid range is between 0V to 440V.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.12.1.19
Type
scalar
Access
readwrite
Status
mandatory
Parent
rPDUIdent
Siblings
18

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rPDUIdentName mandatory
The name of the Rack PDU. The maximum string size is device dependent.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.1
rPDUIdentDeviceNumBreakers mandatory
Getting this OID will return the number of circuit breakers supported by the device. This is the same as the number of banks of outlets. 0 will be returned if the unit has no phas…
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.10
rPDUIdentDeviceBreakerRating mandatory
Getting this OID will return rating of the circuit breakers on the device in Amps if it has any.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.11
rPDUIdentDeviceOrientation mandatory
Getting this OID will return the intended physical orientation of the device. OrientHorizonatal(1) indicates Horizontal. OrientVertical(2) indicates Vertical.
scalarEnumeration.1.3.6.1.4.1.318.1.1.12.1.12
rPDUIdentDeviceOutletLayout mandatory
Getting this OID will return outlet layout for the device. seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,... seqPhas…
scalarEnumeration.1.3.6.1.4.1.318.1.1.12.1.13
rPDUIdentDeviceDisplayOrientation mandatory
Getting this OID will return the intended physical orientation of the Seven-Segment Display or LCD. Normal(1) indicates Normal. Reverse(2)indicates Upside-Down.
scalarEnumeration.1.3.6.1.4.1.318.1.1.12.1.14
rPDUIdentDeviceLinetoLineVoltage mandatory
Getting/Setting this OID will return/set the Line to Line Voltage. This OID defaults to the nominal input line voltage in volts AC. This setting is used to calculate total power a…
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.15
rPDUIdentDevicePowerWatts mandatory
Getting this OID will return the Power in Watts.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.16
rPDUIdentDevicePowerFactor mandatory
Getting/setting this OID will return/set the Power Factor in thousandths (1000 is power factor of 1). This OID is only writable for AP7xxx SKUs Valid range is from 0 to…
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.17
rPDUIdentDevicePowerVA mandatory
Getting this OID will return the Power in VA.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.18
rPDUIdentHardwareRev mandatory
The hardware revision of the Rack PDU. This value is set at the factory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.2
rPDUIdentFirmwareRev mandatory
An 8-byte ID string identifying the Rack PDU firmware revision. This value is set at the factory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.3
rPDUIdentDateOfManufacture mandatory
The date when the Rack PDU was manufactured in mm/dd/yyyy format. This value is set at the factory. The year 2000 will be represented by 00.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.4
rPDUIdentModelNumber mandatory
A 10-character string identifying the model number of the Rack PDU. This value is set at the factory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.5
rPDUIdentSerialNumber mandatory
A 12-character string identifying the serial number of the Rack PDU. This value is set at the factory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.12.1.6
rPDUIdentDeviceRating mandatory
Getting this OID will return the electrical rating of the device in Amps.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.7
rPDUIdentDeviceNumOutlets mandatory
Getting this OID will return the number of outlets contained in the device.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.8
rPDUIdentDeviceNumPhases mandatory
Getting this OID will return the number of phases supported by the device.
scalarInteger32.1.3.6.1.4.1.318.1.1.12.1.9