airIRRP500UnitStatusInputState
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.21
Object
scalar
mandatory
Enumeration
The state of the input contact.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.21- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- airIRRP500UnitStatus
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | open |
2 | closed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| airIRRP500UnitStatusOperateMode mandatory The cooling unit operating mode. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.1 |
| airIRRP500UnitStatusAirFlowUS mandatory The unit air flow in cubic feet per minute. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.10 |
| airIRRP500UnitStatusAirFlowMetric mandatory The unit air flow in hundredths of
liters per second. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.11 |
| airIRRP500UnitStatusFanSpeed mandatory The unit average fan speed in tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.12 |
| airIRRP500UnitStatusCoolDemand mandatory The unit cooling demand in tenths of kiloWatts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.13 |
| airIRRP500UnitStatusCoolOutput mandatory The unit cooling output in tenths of kiloWatts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.14 |
| airIRRP500UnitStatusHumidifyDemand mandatory The amount of humidification the unit is demanding
from the humidifier in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.15 |
| airIRRP500UnitStatusHumidifyOutput mandatory The actual humidification output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.16 |
| airIRRP500UnitStatusDehumidifyDemand mandatory The amount of dehumidification the unit is
demanding in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.17 |
| airIRRP500UnitStatusDehumidifyOutput mandatory The actual dehumidification output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.18 |
| airIRRP500UnitStatusReheatDemand mandatory The amount of heating the unit is demanding
from the electric heater in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.19 |
| airIRRP500UnitStatusMaximumRackInletTempUS mandatory The maximum unit rack inlet temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.2 |
| airIRRP500UnitStatusReheatOutput mandatory The actual heating output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.20 |
| airIRRP500UnitStatusOutputState mandatory The state of the output relay. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.22 |
| airIRRP500UnitStatusRackInletTemperature1US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.23 |
| airIRRP500UnitStatusRackInletTemperature1Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.24 |
| airIRRP500UnitStatusRackInletTemperature2US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.25 |
| airIRRP500UnitStatusRackInletTemperature2Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.26 |
| airIRRP500UnitStatusRackInletTemperature3US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.27 |
| airIRRP500UnitStatusRackInletTemperature3Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.28 |
| airIRRP500UnitStatusContainmtDPUS mandatory The unit containment differential pressure in
hundredths of inches of water. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.29 |
| airIRRP500UnitStatusMaximumRackInletTempMetric mandatory The maximum unit rack inlet temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.3 |
| airIRRP500UnitStatusContainmtDPMetric mandatory The unit containment differential pressure in Pa. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.30 |
| airIRRP500UnitStatusFilterDPUS mandatory The unit air filter differential pressure in
hundredths of inches of water. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.31 |
| airIRRP500UnitStatusFilterDPMetric mandatory The unit air filter differential pressure in Pa. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.32 |
| airIRRP500UnitStatusHumidifierCurrent mandatory The humidifier current of the unit
in tenths of amperes. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.33 |
| airIRRP500UnitStatusHumidifierWaterConductivity mandatory The water conductivity in the humidifier of the unit
in microSiemens/cm. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.34 |
| airIRRP500UnitStatusActivePowerSource mandatory The power source that is powering the unit. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.35 |
| airIRRP500UnitStatusFluidValvePosition mandatory The fluid valve position in percent open. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.36 |
| airIRRP500UnitStatusFluidFlowUS mandatory The fluid flow in tenths of gallons per minute. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.37 |
| airIRRP500UnitStatusFluidFlowMetric mandatory The fluid flow in hundredths of liters per second. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.38 |
| airIRRP500UnitStatusEnteringFluidTemperatureUS mandatory The temperature of the entering fluid in
tenths of degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.39 |
| airIRRP500UnitStatusSupplyAirTempUS mandatory The unit supply air temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.4 |
| airIRRP500UnitStatusEnteringFluidTemperatureMetric mandatory The temperature of the entering fluid in
tenths of degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.40 |
| airIRRP500UnitStatusLeavingFluidTemperatureUS mandatory The temperature of the Leaving fluid in
tenths of degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.41 |
| airIRRP500UnitStatusLeavingFluidTemperatureMetric mandatory The temperature of the Leaving fluid in
tenths of degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.42 |
| airIRRP500UnitStatusLeakSensor mandatory The state (no-leak/leak) of the leak sensor. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.43 |
| airIRRP500UnitStatusSupplyAirTempMetric mandatory The unit supply air temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.5 |
| airIRRP500UnitStatusReturnAirTempUS mandatory The unit return air temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.6 |
| airIRRP500UnitStatusReturnAirTempMetric mandatory The unit return air temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.7 |
| airIRRP500UnitStatusSupplyHumidity mandatory The relative humidity of the supply air in
tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.8 |
| airIRRP500UnitStatusReturnHumidity mandatory The relative humidity of the return air in
tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.2.2.2.9 |