airIRRP100UnitStatusContainmtDPUS
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.31
Object
scalar
mandatory
Integer32
The unit containment differential pressure in hundredths of inches of water.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.31- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- airIRRP100UnitStatus
- Siblings
- 49
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| airIRRP100UnitStatusOperateMode mandatory The cooling unit operating mode. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.1 |
| airIRRP100UnitStatusAirFlowUS mandatory The unit air flow in cubic feet per minute. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.10 |
| airIRRP100UnitStatusAirFlowMetric mandatory The unit air flow in hundredths of
liters per second. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.11 |
| airIRRP100UnitStatusFanSpeed mandatory The unit average fan speed in tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.12 |
| airIRRP100UnitStatusCoolDemand mandatory The unit cooling demand in tenths of kiloWatts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.13 |
| airIRRP100UnitStatusCoolOutput mandatory The unit cooling output in tenths of kiloWatts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.14 |
| airIRRP100UnitStatusHumidifyDemand mandatory The amount of humidification the unit is demanding
from the humidifier in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.15 |
| airIRRP100UnitStatusHumidifyOutput mandatory The actual humidification output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.16 |
| airIRRP100UnitStatusDehumidifyDemand mandatory The amount of dehumidification the unit is
demanding in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.17 |
| airIRRP100UnitStatusDehumidifyOutput mandatory The actual dehumidification output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.18 |
| airIRRP100UnitStatusReheatDemand mandatory The amount of heating the unit is demanding
from the electric heater in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.19 |
| airIRRP100UnitStatusRackInletTempUS mandatory The unit rack inlet temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.2 |
| airIRRP100UnitStatusReheatOutput mandatory The actual heating output of the unit
in percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.20 |
| airIRRP100UnitStatusInputState mandatory The state of the input contact. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.21 |
| airIRRP100UnitStatusOutputState mandatory The state of the output relay. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.22 |
| airIRRP100UnitStatusRackInletTemperature1US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.23 |
| airIRRP100UnitStatusRackInletTemperature1Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.24 |
| airIRRP100UnitStatusRackInletTemperature2US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.25 |
| airIRRP100UnitStatusRackInletTemperature2Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.26 |
| airIRRP100UnitStatusRackInletTemperature3US mandatory The unit rack inlet temperature sensor in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.27 |
| airIRRP100UnitStatusRackInletTemperature3Metric mandatory The unit rack inlet temperature sensor in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.28 |
| airIRRP100UnitStatusFilterDPUS mandatory The unit air filter differential pressure in
hundredths of inches of water. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.29 |
| airIRRP100UnitStatusRackInletTempMetric mandatory The unit rack inlet temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.3 |
| airIRRP100UnitStatusFilterDPMetric mandatory The unit air filter differential pressure in Pa. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.30 |
| airIRRP100UnitStatusContainmtDPMetric mandatory The unit containment differential pressure in Pa. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.32 |
| airIRRP100UnitStatusHumidifierCurrent mandatory The humidifier current of the unit
in tenths of amperes. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.33 |
| airIRRP100UnitStatusHumidifierWaterConductivity mandatory The water conductivity in the humidifier of the unit
in microSiemens/cm. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.34 |
| airIRRP100UnitStatusCompressorDriveSpeed mandatory The compressor drive speed in hundredths of Hertz. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.35 |
| airIRRP100UnitStatusCompressorDrivePower mandatory The compressor drive power consumption in
tenths of kiloWatts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.36 |
| airIRRP100UnitStatusCompressorDriveVoltage mandatory The compressor drive voltage consumption in
tenths of volts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.37 |
| airIRRP100UnitStatusCompressorDriveCurrent mandatory The compressor drive voltage consumption in
tenths of amperes. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.38 |
| airIRRP100UnitStatusCompressorDriveDCLinkVoltage mandatory The compressor drive DC link voltage in
tenths of volts. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.39 |
| airIRRP100UnitStatusSupplyAirTempUS mandatory The unit supply air temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.4 |
| airIRRP100UnitStatusCompressorDriveHeatSinkTempUS mandatory The temperature of the compressor drive heatsink
in tenths of degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.40 |
| airIRRP100UnitStatusCompressorDriveHeatSinkTempMetric mandatory The temperature of the compressor drive heatsink
in tenths of degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.41 |
| airIRRP100UnitStatusCompressorDriveControlCardTempUS mandatory The temperature of the compressor drive control card
in tenths of degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.42 |
| airIRRP100UnitStatusCompressorDriveControlCardTempMetric mandatory The temperature of the compressor drive control card
in tenths of degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.43 |
| airIRRP100UnitStatusCompressorDriveWarningStatus mandatory The four byte warning status of the compressor drive
in hexadecimal. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.44 |
| airIRRP100UnitStatusCompressorDriveAlarmStatus mandatory The four byte alarm status of the compressor drive
in hexadecimal. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.45 |
| airIRRP100UnitStatusSuctionPressureUS mandatory Unit suction pressure in pounds per square inch (PSI). | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.46 |
| airIRRP100UnitStatusSuctionPressureMetric mandatory Unit suction pressure in kiloPascals (kPa). | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.47 |
| airIRRP100UnitStatusDischargePressureUS mandatory Unit discharge pressure in pounds per square inch (PSI). | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.48 |
| airIRRP100UnitStatusDischargePressureMetric mandatory Unit discharge pressure in kiloPascals (kPa). | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.49 |
| airIRRP100UnitStatusSupplyAirTempMetric mandatory The unit supply air temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.5 |
| airIRRP100UnitStatusLeakSensor mandatory The state (no-leak/leak) of the leak sensor. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.50 |
| airIRRP100UnitStatusReturnAirTempUS mandatory The unit return air temperature in tenths of
degrees Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.6 |
| airIRRP100UnitStatusReturnAirTempMetric mandatory The unit return air temperature in tenths of
degrees Celsius. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.7 |
| airIRRP100UnitStatusSupplyHumidity mandatory The relative humidity of the supply air in
tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.8 |
| airIRRP100UnitStatusReturnHumidity mandatory The relative humidity of the return air in
tenths of percent. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.3.3.1.2.2.9 |