airFMSysCoilCfg
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.13.1.4.3.5
Object
scalar
mandatory
Enumeration
The type of cooling coils installed in the Modules in this System: DX coil, DX and MultiCool (chilled water) coils, DX and Economizer coils, or only a Chilled Liquid coil. A value of notApplicable indicates that this OID does not apply to this device due to its configuration.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.13.1.4.3.5- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- airFMSysSetup
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | dx |
3 | econ |
4 | multicool |
5 | chilledWater |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| airFMSysNumModules mandatory The number of Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.1 |
| airFMSysFlowSwitch mandatory The location of the optional flow switch.
None: No flow switch is installed in this System.
DX: Coolant input to the heat exchanger (condenser).
MultiCool: Chilled water input to … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.10 |
| airFMSysCoilFluidVlvAct mandatory The type of valve actuator installed on the coil
fluid valve. The coil fluid valve controls the flow
of coolant into a fluid cooling coil, such as a
MultiCool or Economizer coil.
… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.11 |
| airFMSysCoilFluidVlvType mandatory The type of coil fluid valve installed for the
Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.12 |
| airFMSysCndsrFluidVlvAct mandatory The type of valve actuator installed on the Condenser
fluid valve. The Condenser fluid valve controls the
flow of coolant into the heat exchanger (condenser)
to regulate head pres… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.13 |
| airFMSysCndsrFluidVlvType mandatory The type of Condenser fluid valve installed for the
Modules in this System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.14 |
| airFMSysHotWaterVlvAct mandatory The type of valve actuator installed on the hot water
valve.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.15 |
| airFMSysNumRemoteSensors mandatory The number of remote sensors detected by the system. | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.13.1.4.3.16 |
| airFMSysNumPCIOMs mandatory The number of Programmable Customer Input/Output
Modules (PCIOMs) installed in the Main Module of this
System. Each PCIOM adds four input contacts and four
output relays to the Sy… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.2 |
| airFMSysMainsVlt mandatory The mains voltage for the Modules in this System.
A value of N/A indicates that this OID does not apply
to this device due to its configuration. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.13.1.4.3.3 |
| airFMSysUPSVlt mandatory The UPS voltage for the Modules in this System.
A value of N/A indicates that this OID does not apply
to this device due to its configuration. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.13.1.4.3.4 |
| airFMSysRefrigType mandatory The type of refrigerant used by each compressor in
the system.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.6 |
| airFMSysHeatRejection mandatory The method the Modules in this System use to transfer
heat away from the refrigerant.
A value of notApplicable indicates that this OID does
not apply to this device due to its con… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.7 |
| airFMSysDischAirPtrn mandatory The discharge air pattern for the Modules in this
System.
A value of notApplicable indicates that this OID does
not apply to this device due to its configuration. | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.8 |
| airFMSysAirFltr mandatory The type of air filters (standard or high efficiency)
installed in the Modules of this System.
A value of notApplicable indicates that this OID does
not apply to this device due t… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.13.1.4.3.9 |