swPoESystemManagementMode

PoE-MIB · .1.3.6.1.4.1.171.12.24.1.3

Object

scalar r/w Enumeration

This mode can be either power_limit mode or auto mode.
power_limit: If power supplied to the port exceeds the power limit
specified for it, this port will be shut down.
auto: The system will automatically determine the PD class of the
device connected to the port in the first stage. Normally, the PD
can be classified as class 1, 2, or 3. If the PD cannot be classified,
it will be classified as class 0. For class 0, it will assume that the PD
may consume the max power allowed. During the power feeding stage, if the power
supplied to the port exceeds the upper limit of the detected PD class, this
port will be shut down. For the upper limit for each class, it is 4W for
class 1 PD class, 7W for class 2, and 15.4W for class 3 PD and class 0 PD.

Context

MIB: PoE-MIB
OID: .1.3.6.1.4.1.171.12.24.1.3
Type: scalar
Access: readwrite
Status: current
Parent: swPoESystemCtrl
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	power-limit
`2`	auto

Related Objects

Sibling Objects

Object	Type	Syntax	OID
swPoESystemPowerLimit The power budget (in watts) of the PoE sytem.	scalar	Integer32	`.1.3.6.1.4.1.171.12.24.1.1`
swPoESystemStackingCtrlTable A table that is used to configure PoE system information based on Unit ID. The Unit ID is used for stacking.	table	-	`.1.3.6.1.4.1.171.12.24.1.11`
swPoESystemPowerDisconnectMethod The power management disconnection method. When the total consumed power exceeds the power budget, the PoE controller initiates port disconnection, to prevent overloading the powe…	scalar	Enumeration	`.1.3.6.1.4.1.171.12.24.1.2`
swPoESystemLedMode Specifies if the system mode will be POE or NORMAL.	scalar	Enumeration	`.1.3.6.1.4.1.171.12.24.1.4`
swPoESystemCtrlLegacyPD The legacy PD detection state. Enables or disables legacy PD detection on all PoE port.	scalar	Enumeration	`.1.3.6.1.4.1.171.12.24.1.6`