lowVoltageThreshold
PPM-IGNIS-MIB ·
.1.3.6.1.4.1.31225.1.1.1.28
Object
scalar
r/w
mV Integer32
Low voltage alarm threshold, in mV. Valid range: 9000-15000mV.
Context
- MIB
- PPM-IGNIS-MIB
- OID
.1.3.6.1.4.1.31225.1.1.1.28- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- mV
- Parent
- ignisSystem
- Siblings
- 21
Syntax
mV Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snmpHWrevision ViaLiteHD Controller hardware version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.10 |
| snmpSWversion ViaLiteHD Controller software version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.11 |
| snmpMACaddress MAC address of the ViaLiteHD controller. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.31225.1.1.1.12 |
| snmpSerialNumber ViaLiteHD Controller Serial number. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.13 |
| sysDate System date. Formatted as DD/MM/YY. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.2 |
| snmpTemp ViaLiteHD controller internal temperature. Trap threshold set by highTempThreshold (ignisSystem.27). | scalar | degC Integer32 | .1.3.6.1.4.1.31225.1.1.1.20 |
| snmpVoltage ViaLiteHD backplane voltage reading, measured in millivolts. Nominal value 12000mV.
Trap thresholds set by lowVoltageThreshold & highVoltageThreshold (ignisSystem.28 & .29). | scalar | mV Integer32 | .1.3.6.1.4.1.31225.1.1.1.21 |
| mcpLEDs A bitmap representation of the SNMP controller front panel LEDs.
Each LED is a 4 bit nibble, encoded as: Off=0x0, Green=0x1, Red=0x3
Nibbles are arranged (LSB->MSB) PWR LED, Link… | scalar | Integer32 | .1.3.6.1.4.1.31225.1.1.1.22 |
| mcpReset Reset command for the SNMP controller. | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.23 |
| psu1Status PSU #1 status. | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.25 |
| psu2Status PSU #2 status. | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.26 |
| highTempThreshold Controller module internal temperature alarm threshold (in degrees Celsius). Max of 90 degC | scalar | degC Integer32 | .1.3.6.1.4.1.31225.1.1.1.27 |
| highVoltageThreshold High voltage alarm threshold, in mV. Valid range: 9000-15000mV. | scalar | mV Integer32 | .1.3.6.1.4.1.31225.1.1.1.29 |
| sysTime System time. Formatted as HH:MM:SS. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.3 |
| autoCfgDownload Enable/disable automatic card configuration.
If enabled, when a module is replaced by an exact duplicate, the controller will
reconfigure the new module to match the old module's … | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.30 |
| defaulthighTempThreshold Default internal temperature alarm threshold in deg. celsius. Max of 90 degC | scalar | degC Integer32 | .1.3.6.1.4.1.31225.1.1.1.31 |
| defaultlowVoltageThreshold Default low voltage alarm threshold(in mV). | scalar | mV Integer32 | .1.3.6.1.4.1.31225.1.1.1.32 |
| defaulthighVoltageThreshold Default high voltage alarm threshold(in mV). | scalar | mV Integer32 | .1.3.6.1.4.1.31225.1.1.1.33 |
| sysVoltageAlarm Current status of the system voltage alarm, as configured with lowVoltageThreshold and highVoltageThreshold. 0 = No alarm. -1 = Low voltage alarm. 1 = High voltage alarm. | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.34 |
| sysTempAlarm Current status of the system temperature alarm, as configured with highTempThreshold. 0 = No alarm. 1 = High temperature alarm. | scalar | Enumeration | .1.3.6.1.4.1.31225.1.1.1.35 |
| snmpPartNumber ViaLiteHD Controller part number. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.31225.1.1.1.36 |