pmPowerMgmtPhasesTablePowerFactorType

PM-MIB · .1.3.6.1.4.1.10418.17.2.5.9.1.85
MIB view Table view

Object

column Enumeration 
Type of power factor values.
Returns 0 if not supported.

Context

MIB
PM-MIB
OID
.1.3.6.1.4.1.10418.17.2.5.9.1.85
Type
column
Access
readonly
Status
current
Parent
pmPowerMgmtPhasesTableEntry
Table
pmPowerMgmtPhasesTable
Siblings
33

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none-sensor
1estimated
2measured

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pmPowerMgmtPhasesTablePortNumber
Serial Port number.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.9.1.1
pmPowerMgmtPhasesTableCurrentHighCritical
phase high critical (alarm) current threshold (A x 10). Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.100
pmPowerMgmtPhasesTableCurrentHighWarning
phase high warning current threshold (A x 10). Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.101
pmPowerMgmtPhasesTableCurrentLowWarning
phase low warning current threshold (A x 10). Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.102
pmPowerMgmtPhasesTableCurrentLowCritical
phase low critical current threshold (A x 10). Set fails if value is higher than CurrentLowWarning. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.103
pmPowerMgmtPhasesTablePduNumber
Index.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.9.1.2
pmPowerMgmtPhasesTableNumber
Number of the phase in the PDU.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.9.1.3
pmPowerMgmtPhasesTableName
Name of the phase. Returns N/A if not applicable.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.9.1.4
pmPowerMgmtPhasesTableAlarm
Show the phase alarm status. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.45
pmPowerMgmtPhasesTablePortName
Serial Port Name where the PDU is connected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.9.1.5
pmPowerMgmtPhasesTableCurrentValue
Actual value of current in the phase (A x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.50
pmPowerMgmtPhasesTableCurrentMax
Maximum value of current in the phase (A x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.51
pmPowerMgmtPhasesTableCurrentMin
Minimum value of current in the phase (A x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.52
pmPowerMgmtPhasesTableCurrentAvg
Average value of current in the phase (A x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.53
pmPowerMgmtPhasesTableCurrentReset
noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.54
pmPowerMgmtPhasesTablePduId
PDU identification.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.9.1.6
pmPowerMgmtPhasesTablePowerValue
Actual value of power in the phase (W x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.60
pmPowerMgmtPhasesTablePowerMax
Maximum value of power in the phase (W x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.61
pmPowerMgmtPhasesTablePowerMin
Minimum value of power in the phase (W x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.62
pmPowerMgmtPhasesTablePowerAvg
Average value of power in the phase (W x 10). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.63
pmPowerMgmtPhasesTablePowerReset
noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.64
pmPowerMgmtPhasesTablePowerType
Type of power values. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.65
pmPowerMgmtPhasesTableVoltageValue
Actual value of voltage in the phase (V). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.70
pmPowerMgmtPhasesTableVoltageMax
Maximum value of voltage in the phase (V). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.71
pmPowerMgmtPhasesTableVoltageMin
Minimum value of voltage in the phase (V). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.72
pmPowerMgmtPhasesTableVoltageAvg
Average value of voltage in the phase (V). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.73
pmPowerMgmtPhasesTableVoltageReset
noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.74
pmPowerMgmtPhasesTableVoltageType
Type of voltage values. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.75
pmPowerMgmtPhasesTablePowerFactorValue
Actual value of power factor in the phase (Pf x 100). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.80
pmPowerMgmtPhasesTablePowerFactorMax
Maximum value of power factor in the phase (Pf x 100). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.81
pmPowerMgmtPhasesTablePowerFactorMin
Minimum value of power factor in the phase (Pf x 100). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.82
pmPowerMgmtPhasesTablePowerFactorAvg
Average value of power factor in the phase (Pf x 100). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.9.1.83
pmPowerMgmtPhasesTablePowerFactorReset
noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.9.1.84