pmPowerMgmtBanksTablePowerFactorType
PM-MIB ·
.1.3.6.1.4.1.10418.17.2.5.11.1.85
Object
column
Enumeration
Type of power factor values. Returns 0 if not supported.
Context
- MIB
- PM-MIB
- OID
.1.3.6.1.4.1.10418.17.2.5.11.1.85- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pmPowerMgmtBanksTableEntry
- Table
- pmPowerMgmtBanksTable
- Siblings
- 36
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none-sensor |
1 | estimated |
2 | measured |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pmPowerMgmtBanksTablePortNumber Serial Port number. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.11.1.1 |
| pmPowerMgmtBanksTableCurrentHighCritical bank high critical (alarm) current threshold (A x 10).
Set fails if value is lower that CurrentHighWarning.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.100 |
| pmPowerMgmtBanksTableCurrentHighWarning bank high warning current threshold (A x 10).
Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.101 |
| pmPowerMgmtBanksTableCurrentLowWarning bank low warning current threshold (A x 10).
Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.102 |
| pmPowerMgmtBanksTableCurrentLowCritical bank low critical current threshold (A x 10).
Set fails if value is higher than CurrentLowWarning.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.103 |
| pmPowerMgmtBanksTableEnergyValue bank energy value (Wh).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.105 |
| pmPowerMgmtBanksTableEnergyStartTime time at which energy calculation commenced (ISO8601 format).
Returns N/A if not applicable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.11.1.106 |
| pmPowerMgmtBanksTableEnergyReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to PDU. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.107 |
| pmPowerMgmtBanksTablePduNumber Index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.11.1.2 |
| pmPowerMgmtBanksTableNumber Number of the bank in the PDU. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.11.1.3 |
| pmPowerMgmtBanksTableName Name of the bank. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.11.1.4 |
| pmPowerMgmtBanksTableAlarm Show the bank alarm status.
Returns 0 if not supported. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.45 |
| pmPowerMgmtBanksTablePortName Serial Port Name where the PDU is connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.11.1.5 |
| pmPowerMgmtBanksTableCurrentValue Actual value of current in the bank (A x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.50 |
| pmPowerMgmtBanksTableCurrentMax Maximum value of current in the bank (A x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.51 |
| pmPowerMgmtBanksTableCurrentMin Minimum value of current in the bank (A x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.52 |
| pmPowerMgmtBanksTableCurrentAvg Average value of current in the bank (A x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.53 |
| pmPowerMgmtBanksTableCurrentReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to PDU. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.54 |
| pmPowerMgmtBanksTablePduId PDU identification. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.11.1.6 |
| pmPowerMgmtBanksTablePowerValue Actual value of power in the bank (W x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.60 |
| pmPowerMgmtBanksTablePowerMax Maximum value of power in the bank (W x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.61 |
| pmPowerMgmtBanksTablePowerMin Minimum value of power in the bank (W x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.62 |
| pmPowerMgmtBanksTablePowerAvg Average value of power in the bank (W x 10).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.63 |
| pmPowerMgmtBanksTablePowerReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to PDU. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.64 |
| pmPowerMgmtBanksTablePowerType Type of power values.
Returns 0 if not supported. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.65 |
| pmPowerMgmtBanksTableVoltageValue Actual value of voltage in the bank (V).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.70 |
| pmPowerMgmtBanksTableVoltageMax Maximum value of voltage in the bank (V).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.71 |
| pmPowerMgmtBanksTableVoltageMin Minimum value of voltage in the bank (V).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.72 |
| pmPowerMgmtBanksTableVoltageAvg Average value of voltage in the bank (V).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.73 |
| pmPowerMgmtBanksTableVoltageReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to PDU. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.74 |
| pmPowerMgmtBanksTableVoltageType Type of voltage values.
Returns 0 if not supported. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.75 |
| pmPowerMgmtBanksTablePowerFactorValue Actual value of power factor in the bank (Pf x 100).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.80 |
| pmPowerMgmtBanksTablePowerFactorMax Maximum value of power factor in the bank (Pf x 100).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.81 |
| pmPowerMgmtBanksTablePowerFactorMin Minimum value of power factor in the bank (Pf x 100).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.82 |
| pmPowerMgmtBanksTablePowerFactorAvg Average value of power factor in the bank (Pf x 100).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.11.1.83 |
| pmPowerMgmtBanksTablePowerFactorReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to PDU. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.11.1.84 |