cm110HwJmp5ConfigMode
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.5
Object
column
Enumeration
This object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration control from the management module's software and all configuration control comes from the media module's hardware switches or jumpers.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm110RateConvEntry
- Table
- cm110RateConvTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm110HwSw4TpDuplex Media converter module's current switch setting for copper duplex. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.10 |
| cm110HwSw5TpSpeed Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.11 |
| cm110HwSw6FiberDuplex Media converter module's current switch setting for fiber duplex. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.12 |
| cm110HwSw7Loopback Media converter module's current switch setting for fiber loopback mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.13 |
| cm110FiberLinkStatus Media converter module's current fiber link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.14 |
| cm110FiberConnType Media converter module's fiber port connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.15 |
| cm110FiberSpeed Media converter module's fiber port speed in megabits per second. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.16 |
| cm110FiberFarEndFault Media converter module's current fiber Far End Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.17 |
| cm110FiberReceiveStatus This object identifies the status of whether light is being received
on the fiber port | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.18 |
| cm110FiberLoopBack This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.19 |
| cm110SlotIndex The Slot number the CM-110 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.2 |
| cm110CopperLinkStatus Media converter module's current copper link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.20 |
| cm110CopperConnType Media converter module's copper connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.21 |
| cm110CopperAutoNegState Media converter module's current copper auto-negotiation state. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.22 |
| cm110CopperSpeed If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed
setting. If auto-negotiation is not compl… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.23 |
| cm110CopperDuplex If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not comp… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.24 |
| cm110CopperCrossOver If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not c… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.25 |
| cm110CopperPause If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control)
setting. If auto-negotiati… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.26 |
| cm110CopperLPRFStatus Media converter module's fiber Link Partner Remote Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.27 |
| cm110Modelname This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.3 |
| cm110ModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.4 |
| cm110HwJmp6AutoMDIX This object identifies the media converter module's hardware Auto MDIX jumper
settings. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.6 |
| cm110HwSw1TpAutoNegotiation Media converter module's current switch setting for copper auto-negotiation. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.7 |
| cm110HwSw2LinkMode Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.8 |
| cm110HwSw3FarEndFault Media converter module's current switch setting for Far End Fault. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.9 |