cm110FiberLoopBack
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.19
Object
column
r/w
EnableDisableValue
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cm110RateConvEntry
- Table
- cm110RateConvTable
- Siblings
- 25
Syntax
EnableDisableValue
- Source
- EnableDisableValue
- Base type
Enumeration
Values & Constraints
Type Values
-1 | notApplicable |
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm110HwSw4TpDuplex Media converter module's current switch setting for copper duplex. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.10 |
| cm110HwSw5TpSpeed Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.11 |
| cm110HwSw6FiberDuplex Media converter module's current switch setting for fiber duplex. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.12 |
| cm110HwSw7Loopback Media converter module's current switch setting for fiber loopback mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.13 |
| cm110FiberLinkStatus Media converter module's current fiber link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.14 |
| cm110FiberConnType Media converter module's fiber port connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.15 |
| cm110FiberSpeed Media converter module's fiber port speed in megabits per second. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.16 |
| cm110FiberFarEndFault Media converter module's current fiber Far End Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.17 |
| cm110FiberReceiveStatus This object identifies the status of whether light is being received
on the fiber port | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.18 |
| cm110SlotIndex The Slot number the CM-110 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.2 |
| cm110CopperLinkStatus Media converter module's current copper link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.20 |
| cm110CopperConnType Media converter module's copper connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.21 |
| cm110CopperAutoNegState Media converter module's current copper auto-negotiation state. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.22 |
| cm110CopperSpeed If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed
setting. If auto-negotiation is not compl… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.23 |
| cm110CopperDuplex If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not comp… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.24 |
| cm110CopperCrossOver If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not c… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.25 |
| cm110CopperPause If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control)
setting. If auto-negotiati… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.26 |
| cm110CopperLPRFStatus Media converter module's fiber Link Partner Remote Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.27 |
| cm110Modelname This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.3 |
| cm110ModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.4 |
| cm110HwJmp5ConfigMode This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media con… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.5 |
| cm110HwJmp6AutoMDIX This object identifies the media converter module's hardware Auto MDIX jumper
settings. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.6 |
| cm110HwSw1TpAutoNegotiation Media converter module's current switch setting for copper auto-negotiation. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.7 |
| cm110HwSw2LinkMode Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.8 |
| cm110HwSw3FarEndFault Media converter module's current switch setting for Far End Fault. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.9 |