adminFunction
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.1.1
Object
scalar
r/w
Enumeration
Perform a specific function on the Device Server. If you want to save all the changes that have been submitted to the Device Server, you need to expand the adminInfo container folder and SET the adminFunction to 1 to write to FLASH. To make the configuration changes take effect, SET the adminFunction to 3 to reboot the Device Server.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- adminInfo
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | writeToFlash |
2 | resetToFactoryDefaults |
3 | reboot |
4 | resetSecurIDNodeSecret |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adminPowerBoot Boot the whole line(if the line is not a power management line) or
a plug (the line is a power management line), and the input format
is line#:plug#(1 based). | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.10 |
| adminPowerReset Reset whole line(only if the line is a power management line),
and the input is the line number(1 based). | scalar | PortNumber | .1.3.6.1.4.1.1966.12.1.1.11 |
| adminPowerStatus Return the status of a plug (the line is a power management line).
The input format is line#:plug#(1 based).
The output is one of following strings: 'off', 'on' or 'u… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.12 |
| adminIpsec IPsec functions. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.1.13 |
| adminPowerMonitorOn Enable host monitoring for a power plug, on a serial port
configured for power management.
The input format is line#:plug#.
e.g. Use '5:10' for serial port 5, plug 10. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.14 |
| adminPowerMonitorOff Disable host monitoring for a power plug, on a serial port
configured for power management.
The input format is line#:plug#.
e.g. Use '5:10' for serial port 5, plug 10. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.15 |
| adminPowerMonitorStatus Return the status of the host monitoring feature for a power plug,
on a serial port configured for power management.
The input format is line#:plug#.
The output is on… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.16 |
| adminPowerMonitorNumberOfReboots Return the number of power cycles (reboots) initiated by the host
monitoring feature for a power plug, on a serial port configured
for power management.
The input fo… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.17 |
| adminPowerMonitorLastRebootTime Returns the time of the last power cycle (reboot), initiated by the host
monitoring feature for a power plug, on a serial port configured for power
management.
The inp… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.18 |
| adminPowerMonitorResetRebootInfo Reset the monitor reboot information (number of reboots and time of
last reboot.
The input format is line#:plug#.
e.g. Use '5:10' for serial port 5, plug 10. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.19 |
| adminLastFunction The last function requested | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.1.2 |
| adminResetSerialStatistics Enter the line number you want to reset statistics | scalar | PortNumber | .1.3.6.1.4.1.1966.12.1.1.20 |
| adminChassisSerialNumber Chassis Serial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.21 |
| adminSlot1SerialNumber Slot 1 Serial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.22 |
| adminSlot2SerialNumber Slot 2 Serial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.23 |
| adminSlot3SerialNumber Slto 3 Serial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.24 |
| adminLTECardSerialNumber LTE CardSerial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.25 |
| adminWIFICardSerialNumber WIFI Card Serial Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.26 |
| adminPartNumber Device part Number | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.27 |
| adminTemperature IOLAN Internal temperature | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.28 |
| adminStatus The status of the last function performed. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.1.3 |
| adminSystemDate The system date.
Format dd/mm/yyyy | scalar | Date | .1.3.6.1.4.1.1966.12.1.1.4 |
| adminSystemTime The system time (local time).
Format hh:mm:ss | scalar | Time | .1.3.6.1.4.1.1966.12.1.1.5 |
| adminKillLine Enter the line number you want to reset | scalar | PortNumber | .1.3.6.1.4.1.1966.12.1.1.6 |
| adminGetClusteredSlavePortNames Set the clustered slave IP address in order to retrieve its
serial port names. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.1.7 |
| adminPowerOn Turn on the power of the whole line(if the line is not a power
management line) or a plug (the line is a power management line),
and the input format is line#:plug#(1 based). | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.8 |
| adminPowerOff Turn off the power of the whole line(if the line is not a power
management line) or a plug (the line is a power management line),
and the input format is line#:plug#(1 based). | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.1.9 |