unitSensorMaximum
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.2.5.1.11
Object
column
SNMPv2-SMIUnsigned32
The largest possible reading as an unsigned integer. The value of this OID variable should be scaled by unitSensorDecimalDigits. For example, if the value is 1 and unitSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled maximum exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.2.5.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- unitSensorConfigurationEntry
- Table
- unitSensorConfigurationTable
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sensorType The type of sensor. | column | SensorTypeEnumeration | .1.3.6.1.4.1.13742.6.3.2.5.1.1 |
| unitSensorTolerance deprecated The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(unitSensorDecimalDigits + 1). For example, if t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.10 |
| unitSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDeci… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.12 |
| unitSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.13 |
| unitSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.14 |
| unitSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecim… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.21 |
| unitSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecima… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.22 |
| unitSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecim… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.23 |
| unitSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecima… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.24 |
| unitSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.2.5.1.25 |
| unitSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimalD… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.26 |
| unitSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimal… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.27 |
| unitSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimalD… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.28 |
| unitSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimalDi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.29 |
| unitSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimalD… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.30 |
| unitSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 and
unitSensorDecimalDi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.2.5.1.31 |
| unitSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.5.1.4 |
| unitSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.2.5.1.6 |
| unitSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.7 |
| unitSensorAccuracy deprecated The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.2.5.1.8 |
| unitSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
unitSensorDecimalDigits. For example, if the value is 1 a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.2.5.1.9 |