transferSwitchSensorLowerCriticalThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.9.4.1.21
Object
The lower critical threshold as an unsigned integer. The value of this OID variable should be scaled by transferSwitchSensorDecimalDigits. For example, if the value is 1 and transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled threshold exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.9.4.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- transferSwitchSensorConfigurationEntry
- Table
- transferSwitchSensorConfigurationTable
- Siblings
- 20
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| transferSwitchSensorTolerance deprecated The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(transferSwitchSensorDecimalDigits + 1). For exa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.10 |
| transferSwitchSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
trans… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.11 |
| transferSwitchSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
tran… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.12 |
| transferSwitchSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the v… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.13 |
| transferSwitchSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.14 |
| transferSwitchSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transf… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.22 |
| transferSwitchSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
trans… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.23 |
| transferSwitchSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transf… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.24 |
| transferSwitchSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.9.4.1.25 |
| transferSwitchSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transfer… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.26 |
| transferSwitchSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transfe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.27 |
| transferSwitchSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transfer… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.28 |
| transferSwitchSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transferS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.29 |
| transferSwitchSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transfer… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.30 |
| transferSwitchSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the value is 1 and
transferS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.9.4.1.31 |
| transferSwitchSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.9.4.1.4 |
| transferSwitchSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.9.4.1.6 |
| transferSwitchSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.7 |
| transferSwitchSensorAccuracy deprecated The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.9.4.1.8 |
| transferSwitchSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
transferSwitchSensorDecimalDigits. For example, if the va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.9.4.1.9 |