pduOrientation
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.2.2.1.84
Object
column
PduOrientationEnumeration
The detected PDU orientation at startup (none if orientation is not supported).
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.2.2.1.84- Type
- column
- Access
- readonly
- Status
- current
- Parent
- unitConfigurationEntry
- Table
- unitConfigurationTable
- Siblings
- 57
Syntax
PduOrientationEnumeration
- Source
- PduOrientationEnumeration
- Base type
Enumeration
Values & Constraints
Type Values
0 | none |
1 | bottomFeed |
2 | topFeed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gateway deprecated The current gateway. A value of 0.0.0.0 indicates an error
or an unset option. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.10 |
| pxMACAddress deprecated The current MAC address.
If bridge interface is enabled, then equal to the MAC address of Ethernet 1
else if Ethernet 1 is enabled, then equal to the MAC address of Ethernet 1
els… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.11 |
| utcOffset The current UTC offset. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.3.2.2.1.12 |
| pduName The user-defined name for the PDU. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.3.2.2.1.13 |
| networkInterfaceType deprecated The network interface type: wired or wireless.
If only the Wireless interface is enabled, then equal to wireless
else equal to wired | column | NetworkInterfaceTypeEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.14 |
| inletCount The number of inlets. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.2 |
| overCurrentProtectorCount The number of overcurrent protectors. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.3 |
| externalSensorsZCoordinateUnits External sensor Z coordinate units: freeform text or rack units (U)
Default is U. | column | ExternalSensorsZCoordinateUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.34 |
| unitDeviceCapabilities A bit string indicating which unit sensors are available. | column | Bits | .1.3.6.1.4.1.13742.6.3.2.2.1.35 |
| outletSequencingDelay deprecated This OID is deprecated, it is an alias for inrushGuardDelay | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.36 |
| globalOutletPowerCyclingPowerOffPeriod The power-off period when an outlet is cycled;
applies to all outlets unless overridden at the outlet level;
specified in seconds;
1 <= value <= 3600 seconds. | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.37 |
| globalOutletStateOnStartup The outlet state used when powering the respective inlet;
applies to all outlets unless overridden at the outlet level.
Note that this value is ignored if relayBehaviorOnPowerLoss… | column | GlobalOutletStateOnStartupEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.38 |
| outletPowerupSequence The sequence in which will the outlets will be switched on under the following conditions.
1) Switch all outlets on operation is executed
2) Power to the PDU is cycled
String must… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.3.2.2.1.39 |
| outletCount The number of outlets. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.4 |
| pduPowerCyclingPowerOffPeriod When power to the PX is cycled (either manually or because of a
temporary power loss), this number determines how many seconds the
PX will wait before it provides power to the ou… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.40 |
| pduDaisychainMemberType The role of the unit in a port forwarding USB or Ethernet cascade | column | DaisychainMemberTypeEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.41 |
| managedExternalSensorCount The number of managed external sensors | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.42 |
| inletControllerCount The number of inlet controllers. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.5 |
| pxInetAddressType deprecated The type of address format
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.13742.6.3.2.2.1.50 |
| pxInetIPAddress deprecated The current IP address. A value of 0.0.0.0 indicates an error
or an unset option.
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293).
For IPv6, its val… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.51 |
| pxInetNetmask deprecated The current netmask. A value of 0.0.0.0 indicates an error
or an unset option.
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293).
For IPv6, its value … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.52 |
| pxInetGateway deprecated The current gateway. A value of 0.0.0.0 indicates an error
or an unset option.
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293).
For IPv6, its value … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.53 |
| loadShedding Enter/Exit Load Shedding Mode | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.55 |
| serverCount The number of servers monitored with the server reachability feature | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.56 |
| inrushGuardDelay The time interval between switching on two outlets;
specified in milliseconds;
100 <= value <= 10000 milliseconds. | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.57 |
| cascadedDeviceConnected Indicates whether another PX2 is connected using an USB cable to
the USB-A port of this PX2 in a cascaded configuration. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.58 |
| synchronizeWithNTPServer Indicates whether time is synchronized with an NTP server. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.59 |
| outletControllerCount The number of outlet controllers. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.6 |
| useDHCPProvidedNTPServer obsolete **NOTE: This object is obsolete. Its functionality has been replaced
by the following:
- If at least one of firstNTPServerAddress and secondNTPServerAddress
has been configured … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.60 |
| firstNTPServerAddressType Represents the type of the corresponding instance
of firstNTPServerAddress object. When setting this value,
be sure that firstNTPServerAddress is of this address type,
e.g. by set… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.13742.6.3.2.2.1.61 |
| firstNTPServerAddress The address of the primary NTP server.
When setting this value, be sure that it
is of the type specified in firstNTPServerAddressType,
e.g. by setting both of them. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.62 |
| secondNTPServerAddressType Represents the type of the corresponding instance
of secondNTPServerAddress object. When setting this value,
be sure that secondNTPServerAddress is of this address type,
e.g. by s… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.13742.6.3.2.2.1.63 |
| secondNTPServerAddress The address of the second NTP server.
When setting this value, be sure that it
is of the type specified in secondNTPServerAddressType,
e.g. by setting both of them. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.64 |
| wireCount obsolete The number of wire objects in the PDU topology. This feature is no
longer used, the returned value is always 0. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.65 |
| transferSwitchCount The number of transfer switches. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.66 |
| productType The product type (PDU, BCM, transfer switch or power meter). | column | ProductTypeEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.67 |
| meteringControllerCount The number of metering controllers. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.68 |
| relayBehaviorOnPowerLoss The relay behavior on power loss (latching or non-latching). | column | RelayPowerLossBehaviorEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.69 |
| externalSensorCount The maximum supported number of external sensors. This value is
fixed and does not reflect how many sensors are actually connected. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.7 |
| deviceCascadeType The type of network cascade this device is part of (none, bridging
or port forwarding). | column | DeviceCascadeTypeEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.70 |
| deviceCascadePosition The position of the device in the cascade chain. Only supported in
port forwarding mode, 0 otherwise. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.71 |
| peripheralDevicesAutoManagement Defines whether newly-connected peripheral devices are automatically
assigned to an unused slot. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.72 |
| frontPanelOutletSwitching Enables/disables switching of outlets using the PDU front panel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.73 |
| frontPanelRCMSelfTest Enables/disables front panel RCM self-test. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.74 |
| frontPanelActuatorControl Enables/disables front panel peripheral actuator control. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.75 |
| circuitCount The number of branch circuits in a panel. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.76 |
| activeDNSServerCount The number of active DNS servers | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.77 |
| activeNTPServerCount The number of active NTP servers | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.78 |
| peripheralDevicePackageCount The number of peripheral device packages. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.79 |
| pxIPAddress deprecated The current IP address. A value of 0.0.0.0 indicates an error
or an unset option. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.8 |
| outletGroupCount The number of configured outlet groups | column | Integer32 | .1.3.6.1.4.1.13742.6.3.2.2.1.80 |
| demandUpdateInterval The update interval (in seconds) for demand sensors (BCM2 only).
Demand sensors report the average active power within the averaging
period. The sensor reading is u… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.81 |
| demandAveragingIntervals The number of intervals for demand sensor averaging (BCM2 only).
Demand sensors report the average active power within the averaging
period. The sensor reading is u… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.82 |
| hasDCInlets True if the PDU has at least one DC inlet | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.2.2.1.83 |
| pduUptime The number of seconds elapsed since the PDU booted. Link units
are not supported and return 0. | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.2.2.1.85 |
| tripCauseOutletHandling How to handle outlets that are suspected to have caused an OCP trip event. | column | TripCauseOutletHandlingEnumeration | .1.3.6.1.4.1.13742.6.3.2.2.1.86 |
| netmask deprecated The current netmask. A value of 0.0.0.0 indicates an error
or an unset option. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.9 |