outletPoleSensorMinimum
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.5.6.1.12
Object
column
SNMPv2-SMIUnsigned32
The smallest possible reading as an unsigned integer. The value of this OID variable should be scaled by outletPoleSensorDecimalDigits. For example, if the value is 1 and outletPoleSensorDecimalDigits is 2, then actual value is 0.01. The value is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.5.6.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- outletPoleSensorConfigurationEntry
- Table
- outletPoleSensorConfigurationTable
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| outletPoleIndex A unique value for each outlet pole. Its value
ranges between 1 and the value of outletPoleCount. | column | Integer32 | .1.3.6.1.4.1.13742.6.3.5.6.1.1 |
| outletPoleSensorTolerance deprecated The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(outletPoleSensorDecimalDigits + 1). For example… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.10 |
| outletPoleSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPol… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.11 |
| outletPoleSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.13 |
| outletPoleSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.14 |
| outletPoleSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPol… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.21 |
| outletPoleSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPole… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.22 |
| outletPoleSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPol… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.23 |
| outletPoleSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPole… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.24 |
| outletPoleSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.5.6.1.25 |
| outletPoleSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleSe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.26 |
| outletPoleSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.27 |
| outletPoleSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleSe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.28 |
| outletPoleSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleSen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.29 |
| outletPoleSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleSe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.30 |
| outletPoleSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value is 1 and
outletPoleSen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.6.1.31 |
| outletPoleSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.5.6.1.4 |
| outletPoleSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.5.6.1.6 |
| outletPoleSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.7 |
| outletPoleSensorAccuracy deprecated The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.5.6.1.8 |
| outletPoleSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
outletPoleSensorDecimalDigits. For example, if the value … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.6.1.9 |