dipSwellEventVoltage
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.0.0.55
Object
scalar
SNMPv2-SMIUnsigned32
The minimum (dip) / maximum (swell) voltage seen during a dip/swell event. This value should be scaled by the number of decimal digits of the respective voltage sensor, found in the inletSensorDecimalDigits or inletPoleSensorDecimalDigits, respectively.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.0.0.55- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- trapInformation
- Siblings
- 55
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapInformationTable A group of objects used exclusively in traps. This is a table for
historic reasons; it can't be queried from the SNMP agent. | table | - | .1.3.6.1.4.1.13742.6.0.0.1 |
| typeOfSensor The type of sensor. | scalar | SensorTypeEnumeration | .1.3.6.1.4.1.13742.6.0.0.10 |
| errorDescription Description of the error | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.11 |
| deviceChangedParameter Identifies the parameter that has changed. | scalar | DeviceIdentificationParameterEnumeration | .1.3.6.1.4.1.13742.6.0.0.12 |
| changedParameterNewValue The new value of the changed parameter | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.13 |
| lhxSupportEnabled deprecated The new enabled state for Schroff LHX support. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.0.0.14 |
| webcamModel The model of the webcam | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.15 |
| webcamConnectionPort The port to which the webcam is connected | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.16 |
| agentInetPortNumber The UDP port number used for accessing the SNMP agent on the device.
This is necessary to identify the expansion unit in a port forwarding cascade. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.13742.6.0.0.18 |
| peripheralDeviceRomcode The 1-wire romcode of a peripheral device | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.19 |
| oldSensorState The old sensor state used in sensor state transition traps. | scalar | SensorStateEnumeration | .1.3.6.1.4.1.13742.6.0.0.2 |
| peripheralDeviceFirmwareUpdateState The firmware update state of a peripheral device | scalar | PeripheralDeviceFirmwareUpdateStateEnumeration | .1.3.6.1.4.1.13742.6.0.0.20 |
| circuitNumber A unique value for each circuit. Defined as follows:
circuitNumber = 1000 * panelId + circuitPosition
Examples:
1045 is the the circuit on panel 1 with lowest circuit p… | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.21 |
| circuitPoleNumber A unique value for each circuit pole. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.22 |
| phoneNumber The phone number of e.g. an SMS receiver. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.23 |
| smartCardReaderId The ID of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.24 |
| smartCardTimestamp The timestamp indicating when the smartcard was inserted or removed.
It is measured in seconds since January 1, 1970 UTC | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.0.0.25 |
| smartCardType The type of a smartcard. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.26 |
| smartCardId The ID/serial number of a smartcard. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.27 |
| suspectedTripCauseLabel The label of the outlet that likely caused the OCP trip,
if it can be determined. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.28 |
| smartCardReaderManufacturer The manufacturer of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.29 |
| pduNumber A unique value for each PDU or power meter. This is the same as
pduId, but for use in traps.
For BCM2 and PMC, pduNumber can be:
- 0 for the main controller
- T… | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.3 |
| smartCardReaderProduct The product name of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.30 |
| smartCardReaderSerialNumber The serial number of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.31 |
| smartCardReaderChannel The channel number of a smartcard reader.
The channel number is used to differentiate multiple readers
implemented in the same physical package. It will be -1 for
single-channel r… | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.32 |
| outletGroupNumber The ID of the outlet group. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.33 |
| serverPowerOperation The power control operation that was initiated on the server
(on/off) | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.34 |
| serverPowerResult The result of the server power control operation. | scalar | ServerPowerControlResultEnumeration | .1.3.6.1.4.1.13742.6.0.0.35 |
| webcamName The user-defined name of the webcam | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.36 |
| webcamFolderUrl The URL of the folder containing the image | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.37 |
| keypadId The ID of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.38 |
| keypadPinTimestamp The timestamp indicating when the PIN was entered.
It is measured in seconds since January 1, 1970 UTC | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.0.0.39 |
| keypadPin The PIN entered on a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.40 |
| keypadManufacturer The manufacturer of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.41 |
| keypadProduct The product name of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.42 |
| keypadSerialNumber The serial number of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.43 |
| keypadChannel The channel number of a keypad.
The channel number is used to differentiate multiple keypads
implemented in the same physical package. It will be -1 for
single-channel keypads. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.44 |
| doorAccessRuleId The ID of a door access control rule. -1 if undefined. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.45 |
| doorAccessDenialReason The reason for door access being denied. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.46 |
| doorAccessRuleName The name of a door access rule. Empty if undefined. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.47 |
| smartCardReaderPosition The position of a smartcard reader.
Contains either the position in the 1-wire topology and the
channel (e.g. D1:H1:C1-1) or, for usb card readers, a string like
usb:<n> where n i… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.48 |
| keypadPosition The position of a keypad.
A string representing the position of the keypad in the 1-wire
topology and the channel (e.g. D1:H1:C1-1) | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.49 |
| inletPoleNumber A unique value for each inlet pole. Its value ranges between 1
and the value of inletPoleCount. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.5 |
| keypadDescription The custom description of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.50 |
| keypadName The custom name of a keypad. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.51 |
| smartCardReaderDescription The custom description of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.52 |
| smartCardReaderName The custom name of a smartcard reader. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.53 |
| inletLinePairNumber A unique value for each inlet line pair. Its value ranges between 1
and the value of inletLinePairCount. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.54 |
| dipSwellEventTimeStamp The timestamp indicating when the dip/swell event occurred.
It is measured in seconds since January 1, 1970 UTC | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.0.0.56 |
| dipSwellEventDuration The dip/swell event duration, measured in milliseconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.0.0.57 |
| portFuseState The new fuse state used in fuse state transition traps. | scalar | PortFuseStateEnumeration | .1.3.6.1.4.1.13742.6.0.0.58 |
| externalPortFuseId The ID of the fuse that triggered a state transition. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.59 |
| externalPortName The human-readable name of an external port. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.60 |
| outletPoleNumber A unique value for each outlet pole. Its value ranges between 1
and the value of outletPoleCount. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.7 |
| externalSensorNumber A unique value for each external sensor. Its value ranges between 1
and the value of externalSensorCount. | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.8 |