pdnDot1qVlanStaticOuterDefaultPriority
PDN-DOT1QEXT-MIB ·
.1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.6
Object
column
r/w
Integer32
When VLAN stacking (Q in Q) is desired, this object contains the
default value of the priority bits in the 802.1q VLAN outer tag
for unknown unicast, broadcast and multicast packets.
For known unicast traffic, the inner VLAN tag priority is copied to
the outer tag priority.
If pdnDot1qVlanStaticOuterTag (above) is zero (0) this object is ignored.
Context
- MIB
- PDN-DOT1QEXT-MIB
- OID
.1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pdnDot1qVlanStaticExtEntry
- Table
- pdnDot1qVlanStaticExtTable
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdnDot1qVlanStaticSecureModeStatus This is objects configure secure mode status for the
selected VLAN. The secure VLAN mode implies that the users
on this VLAN cannot talk to users on a different VLAN. This
sett… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.1 |
| pdnDot1qVlanStaticProxyArpStatus This objects enables/disabled proxy arp on secure VLAN. If the
VLAN is secure, it can optionally have Proxy ARP enabled.
This object is not valid unless pdnDot1qVlanStaticSecureM… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.2 |
| pdnDot1qVlanStaticUplink This is used to configure the port number of the port on
which all frames belonging to secure VLAN are to be forwarded.
This object is not valid unless pdnDot1qVlanStaticSecureMo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3 |
| pdnDot1qVlanStaticDefaultNHR This object is used to configure Default Next Hop Router
Ip Address that would be used only if the Next Hop Router
cannot be learned (i.e from snooping messages).
This object is n… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.4 |
| pdnDot1qVlanStaticOuterTag When VLAN stacking (Q in Q) is desired, this object contains the
value of the outer 802.1q VLAN outer tag.
A value of zero (0) indicates that VLAN stacking is not e… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.5 |
| pdnDot1qVlanStaticOuterEthertype When VLAN stacking (Q in Q) is desired, this object contains the
value of the ethertype in the 802.1q VLAN outer tag.
If pdnDot1qVlanStaticOuterTag (above) is zero … | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.7 |