pdnDot1qVlanStaticDefaultNHR
PDN-DOT1QEXT-MIB ·
.1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.4
Object
This object is used to configure Default Next Hop Router Ip Address that would be used only if the Next Hop Router cannot be learned (i.e from snooping messages). This object is not valid unless pdnDot1qVlanStaticSecureModeStatus is set to ENABLED. If pdnDot1qVlanStaticSecureModeStatus is disabled this object will read 0.0.0.0 address.
Context
- MIB
- PDN-DOT1QEXT-MIB
- OID
.1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pdnDot1qVlanStaticExtEntry
- Table
- pdnDot1qVlanStaticExtTable
- Siblings
- 6
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdnDot1qVlanStaticSecureModeStatus This is objects configure secure mode status for the
selected VLAN. The secure VLAN mode implies that the users
on this VLAN cannot talk to users on a different VLAN. This
sett… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.1 |
| pdnDot1qVlanStaticProxyArpStatus This objects enables/disabled proxy arp on secure VLAN. If the
VLAN is secure, it can optionally have Proxy ARP enabled.
This object is not valid unless pdnDot1qVlanStaticSecureM… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.2 |
| pdnDot1qVlanStaticUplink This is used to configure the port number of the port on
which all frames belonging to secure VLAN are to be forwarded.
This object is not valid unless pdnDot1qVlanStaticSecureMo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3 |
| pdnDot1qVlanStaticOuterTag When VLAN stacking (Q in Q) is desired, this object contains the
value of the outer 802.1q VLAN outer tag.
A value of zero (0) indicates that VLAN stacking is not e… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.5 |
| pdnDot1qVlanStaticOuterDefaultPriority When VLAN stacking (Q in Q) is desired, this object contains the
default value of the priority bits in the 802.1q VLAN outer tag
for unknown unicast, broadcast and multicast packe… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.6 |
| pdnDot1qVlanStaticOuterEthertype When VLAN stacking (Q in Q) is desired, this object contains the
value of the ethertype in the 802.1q VLAN outer tag.
If pdnDot1qVlanStaticOuterTag (above) is zero … | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.7 |