pcePcepEntityMaxBackoffTimer
PCE-PCEP-MIB ·
.1.3.6.1.2.1.227.1.1.1.9
Object
The maximum backoff time for retrying a failed session
setup attempt to a peer.
The backoff time increases for each failed session setup
attempt, until this maximum value is reached. Session
setup attempts then repeats periodically without any
further increase in backoff time.
Context
- MIB
- PCE-PCEP-MIB
- OID
.1.3.6.1.2.1.227.1.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- pcePcepEntityEntry
- Table
- pcePcepEntityTable
- Siblings
- 22
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pcePcepEntityIndex This index is used to uniquely identify the PCEP entity. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.227.1.1.1.1 |
| pcePcepEntityOpenWaitTimer The time that the PCEP entity will wait to receive an Open
message from a peer after the TCP connection has come up.
If no Open message is received within this time, then PCEP
ter… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.10 |
| pcePcepEntityKeepWaitTimer The time that the PCEP entity will wait to receive a
Keepalive or PCErr message from a peer during session
initialization after receiving an Open message. If no
Keepalive or PCEr… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.11 |
| pcePcepEntityKeepAliveTimer The Keepalive transmission timer that this PCEP entity will
propose in the initial OPEN message of each session it is
involved in. This is the maximum time between two
consecutiv… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.12 |
| pcePcepEntityDeadTimer The DeadTimer that this PCEP entity will propose in the
initial OPEN message of each session it is involved in.
This is the time after which a peer should declare a
session down i… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.13 |
| pcePcepEntityAllowNegotiation Whether the PCEP entity will permit negotiation of session
parameters. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.227.1.1.1.14 |
| pcePcepEntityMaxKeepAliveTimer In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the
interval between Keepalive transmissions. Zero means that
the PCEP … | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.15 |
| pcePcepEntityMaxDeadTimer In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the
DeadTimer. Zero means that the PCEP entity will allow not
running a… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.16 |
| pcePcepEntityMinKeepAliveTimer In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the interval between
Keepalive transmissions. Zero means that the PCEP entity
insis… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.17 |
| pcePcepEntityMinDeadTimer In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the DeadTimer. Zero
means that the PCEP entity insists on not running a
DeadTimer. | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.18 |
| pcePcepEntitySyncTimer The value of SyncTimer is used in the case of a synchronized
path computation request using the SVEC object.
Consider the case where a PCReq message is received by … | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.19 |
| pcePcepEntityAdminStatus The administrative status of this PCEP entity.
This is the desired operational status as currently set by
an operator or by default in the implementation. The valu… | column | Enumeration | .1.3.6.1.2.1.227.1.1.1.2 |
| pcePcepEntityRequestTimer The maximum time that the PCEP entity will wait for a
response to a PCReq message. | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.20 |
| pcePcepEntityMaxSessions The maximum number of sessions involving this PCEP entity
that can exist at any time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.227.1.1.1.21 |
| pcePcepEntityMaxUnknownReqs The maximum number of unrecognized requests and replies that
any session on this PCEP entity is willing to accept per
minute before terminating the session.
A PCRep… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.227.1.1.1.22 |
| pcePcepEntityMaxUnknownMsgs The maximum number of unknown messages that any session
on this PCEP entity is willing to accept per minute before
terminating the session. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.227.1.1.1.23 |
| pcePcepEntityOperStatus The operational status of the PCEP entity. It takes one of
the following values.
- operStatusUp(1): the PCEP entity is active.
- operStatusDown(2): the PCEP entity… | column | Enumeration | .1.3.6.1.2.1.227.1.1.1.3 |
| pcePcepEntityAddrType The type of the PCEP entity's Internet address. This object
specifies how the value of the pcePcepEntityAddr object
should be interpreted. Only values unknown(0), ipv4(1), or
ip… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.227.1.1.1.4 |
| pcePcepEntityAddr The local Internet address of this PCEP entity. The type is
given by pcePcepEntityAddrType.
If operating as a PCE server, the PCEP entity listens on
this address. … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.227.1.1.1.5 |
| pcePcepEntityConnectTimer The time that the PCEP entity will wait to establish a TCP
connection with a peer. If a TCP connection is not
established within this time, then PCEP aborts the session
setup att… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.6 |
| pcePcepEntityConnectMaxRetry The maximum number of times the system tries to establish
a TCP connection to a peer before the session with the peer
transitions to the idle state.
When the sessio… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.227.1.1.1.7 |
| pcePcepEntityInitBackoffTimer The initial backoff time for retrying a failed session
setup attempt to a peer.
The backoff time increases for each failed session setup
attempt, until a maximum ba… | column | seconds Unsigned32 | .1.3.6.1.2.1.227.1.1.1.8 |