ppCfgMtaFeatureSwitch
PACKETPORT-MIB ·
.1.3.6.1.4.1.4115.10.1.24
Object
MTA Feature Switch activates certain functionality and compliancies in the MTA.
hashBypass(1): Disable cfg file Hash checking during provisioning sequence.
maxCPEBypass(2): MTA MAC address will not be entered in the CPE table
or counted against the MaxCpeAllowed variable.
mtaFilterBypass(4): MTA packets will not be filtered with CPE filtered packets.
proprietaryCoex(8): Enable the Arris proprietary version of MTA coexistence
and notifications
kdcLoadBalancerSkip(16): Skips the IP check of the KDC load balancer IP forwarding
feature.
usmUserCompareSkip(32): Skips the comparison of the Pcable USM User Name with User Name
in received in a SNMPv3 packet.
snmpInformBypass(64): Skips the verification of the SNMP inform.
ifIndexShiftEnable(128): Shift to using endpoint indices 9&10 to 10&11.
pktcVersionSelector(256): Used to select PacketCable 1.5 support.
mtaProvHaltNoTod(512): Halt PacketCable Provisioning when no TOD server available.
diagLoopRingerTestLowWarning(2048): Enable the display of Low Warning result of
Linecard Loop Diags Ringer Test.
mtaSafeReset(4096): mta will not reset via snmpset pktcMtaDevResetNow until all the lines are in idle.
---------- Docsis3.0 ppCfgMtaFeatureSwitch Bit descriptions ----------
0x00000001 Disable cfg file Hash checking during provisioning sequence.
0x00000002 MTA MAC address will not be counted against the MaxCpeAllowed variable.
0x00000004 UNUSED
0x00000008 UNUSED
0x00000010 Skips the IP check of the KDC load balancer IP forwarding feature.
0x00000020 UNUSED
0x00000040 Skips the verification of the SNMP inform.
0x00000080 UNUSED
0x00000100 UNUSED
0x00000200 UNUSED
0x00000400 Do not strip leading '/' from the MTA config file name.
0x00000800 Report Warning if Loop Diags Ringer Test result is below minimum criteria.
0x00001000 mta will not be reset until all the lines are in idle.
0x80000000 Do not set this bit. It is used to detect an invalid MTA Feature Switch setting. Some
provisioning servers pad the MTA Feature Switch value with leading 1's!
All other bits are unused.
Context
- MIB
- PACKETPORT-MIB
- OID
.1.3.6.1.4.1.4115.10.1.24- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ppConfiguration
- Siblings
- 28
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ppCfgPortTable This table is used to define the configurable data on a per port basis. | table | - | .1.3.6.1.4.1.4115.10.1.1 |
| ppCfgMtaPrimTeleNetDnsAddr obsolete Primary telephony provisioning DNS address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.10 |
| ppCfgMtaSecTeleNetDnsAddr obsolete Secondary telephony provisioning DNS address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.11 |
| ppCfgMtaCableTvEnable This object provides the ability to turn the cable off and on. | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.12 |
| ppCfgMtaConfigFileAccName obsolete The filename of the config file. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.13 |
| ppCfgMtaCountryTemplate The country code template. | scalar | CountryCode | .1.3.6.1.4.1.4115.10.1.14 |
| ppCfgMtaProvMethodIndicator obsolete The telephony provisioning method indicator. | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.15 |
| ppCfgMtaTeleConfigServerIpAddr obsolete The telephony configuration server IP address, in our
case the telephony TFTP server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.16 |
| ppCfgMtaTeleConfigServerName obsolete The telephony configuration server DN, in our case the
telephony TFTP server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.17 |
| ppCfgMtaNcsCallSigTos obsolete The default value used in the IP header
for setting the TOS value for NCS call
signalling. | scalar | Integer32 | .1.3.6.1.4.1.4115.10.1.18 |
| ppCfgMtaDataInterface The data interface type. | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.19 |
| ppCfgMtaAdminState The administrative state of the packetport. | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.2 |
| ppCfgMtaCallpFeatureSwitch Callp Feature Switch activates certain functionality
and compliancies in callp.
WARNING: Changes can result into loss of communication
to the Callagent or loss of the vo… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.10.1.20 |
| ppCfgMtaCallServerType obsolete Call Server Type that packeport is interfacing to. | scalar | PpCallServerType | .1.3.6.1.4.1.4115.10.1.21 |
| ppCfgMtaInternetIsolationState obsolete This object provides the ability to turn the Internet isolation
off, on and auto | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.22 |
| ppCfgRfc2833DigitPayloadType This object is used to define the payload type used for 2833 digit events
when enabled via setting the bit in the Callp Feature Switch. | scalar | Integer32 | .1.3.6.1.4.1.4115.10.1.23 |
| ppCfgMtaBatteryReplaceReporting Determines how the REPLACE BATTERY condition for a TM02DG102 Hardware
rev. 6 is reported. Choices are:
- Same criteria as for all other battery units (value == 1)
- Reports only … | scalar | Enumeration | .1.3.6.1.4.1.4115.10.1.25 |
| ppCfgNsePayloadType This object is used to define the payload type used for NSE messages
when enabled via setting the bit in the Callp Feature Switch. | scalar | Integer32 | .1.3.6.1.4.1.4115.10.1.26 |
| ppCfgMtaCallpFeatureSwitch2 This object is like ppCfgMtaCallpFeatureSwitch. It is used to activates
certain functionality and compliancies in callp.
0x00000001 // Treat osi signal as bz signal (… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.10.1.27 |
| ppCfgMtaDevSecurity | node | - | .1.3.6.1.4.1.4115.10.1.29 |
| ppCfgMtaTeleSyslogServIpAddr The MTA's telephony syslog server IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.3 |
| ppCfgDevHttp | node | - | .1.3.6.1.4.1.4115.10.1.30 |
| ppCfgMtaTeleSyslogServName The MTA's telephony syslog server domain name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.4 |
| ppCfgMtaTeleFullyQualName obsolete MTA fully qualified domain name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.5 |
| ppCfgMtaTeleServProvServIpAddr obsolete The telephony service provider provisioning server IP address.
This object returns 0.0.0.0 if the provisioning server IP
address is unknown or unassigned. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.6 |
| ppCfgMtaTeleServProvServName obsolete The telephony service provider provisioning server domain name.
This object returns a (zero-length) string if the provisioning
server domain name is unknown or unassigned. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.7 |
| ppCfgMtaTeleServProvDhcpIpAddr obsolete The telephony service provider DHCP IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4115.10.1.8 |
| ppCfgMtaTeleServProvDhcpName obsolete The telephony service provider DHCP domain name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.10.1.9 |