ppCfgMtaCallpFeatureSwitch2

PACKETPORT-MIB · .1.3.6.1.4.1.4115.10.1.27
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This object is like ppCfgMtaCallpFeatureSwitch. It is used to activates 
certain functionality and compliancies in callp. 
          
0x00000001 // Treat osi signal as bz signal (This bit is used for NCS only).
0x00000002 // Ignore handling TDD tone detection
0x00000004 // change the codec list behaviour,example:with this bit set, change a=rtpmap:8 PCMA/8000/1 to a=rtpmap:8 PCMA/8000
0x00000008 // Ignore handling Fax/Modem tone detection
0x00000010 // Unused
0x00000020 // Unused
0x00000040 // Unused
0x00000080 // Unused
0x00000100 // Unused 
0x00000200 // Unused
0x00000400 // Unused
0x00000800 // Unused
0x00001000 // Unused
0x00002000 // Unused
0x00004000 // Unused
0x00008000 // Unused
0x00010000 // Unused
0x00020000 // Unused
0x00040000 // Unused
0x00080000 // Unused
0x00100000 // Unused
0x00200000 // Unused
0x00400000 // Unused
0x00800000 // Unused
0x01000000 // Unused
0x02000000 // Unused
0x04000000 // Unused
0x08000000 // Unused
0x10000000 // Unused
0x20000000 // Unused
0x40000000 // Unused
0x80000000 // Unused

Context

MIB
PACKETPORT-MIB
OID
.1.3.6.1.4.1.4115.10.1.27
Type
scalar
Access
readwrite
Status
current
Parent
ppConfiguration
Siblings
28

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ppCfgPortTable
This table is used to define the configurable data on a per port basis.
table-.1.3.6.1.4.1.4115.10.1.1
ppCfgMtaPrimTeleNetDnsAddr obsolete
Primary telephony provisioning DNS address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.10
ppCfgMtaSecTeleNetDnsAddr obsolete
Secondary telephony provisioning DNS address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.11
ppCfgMtaCableTvEnable
This object provides the ability to turn the cable off and on.
scalarEnumeration.1.3.6.1.4.1.4115.10.1.12
ppCfgMtaConfigFileAccName obsolete
The filename of the config file.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.13
ppCfgMtaCountryTemplate
The country code template.
scalarCountryCode.1.3.6.1.4.1.4115.10.1.14
ppCfgMtaProvMethodIndicator obsolete
The telephony provisioning method indicator.
scalarEnumeration.1.3.6.1.4.1.4115.10.1.15
ppCfgMtaTeleConfigServerIpAddr obsolete
The telephony configuration server IP address, in our case the telephony TFTP server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.16
ppCfgMtaTeleConfigServerName obsolete
The telephony configuration server DN, in our case the telephony TFTP server.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.17
ppCfgMtaNcsCallSigTos obsolete
The default value used in the IP header for setting the TOS value for NCS call signalling.
scalarInteger32.1.3.6.1.4.1.4115.10.1.18
ppCfgMtaDataInterface
The data interface type.
scalarEnumeration.1.3.6.1.4.1.4115.10.1.19
ppCfgMtaAdminState
The administrative state of the packetport.
scalarEnumeration.1.3.6.1.4.1.4115.10.1.2
ppCfgMtaCallpFeatureSwitch
Callp Feature Switch activates certain functionality and compliancies in callp. WARNING: Changes can result into loss of communication to the Callagent or loss of the vo…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4115.10.1.20
ppCfgMtaCallServerType obsolete
Call Server Type that packeport is interfacing to.
scalarPpCallServerType.1.3.6.1.4.1.4115.10.1.21
ppCfgMtaInternetIsolationState obsolete
This object provides the ability to turn the Internet isolation off, on and auto
scalarEnumeration.1.3.6.1.4.1.4115.10.1.22
ppCfgRfc2833DigitPayloadType
This object is used to define the payload type used for 2833 digit events when enabled via setting the bit in the Callp Feature Switch.
scalarInteger32.1.3.6.1.4.1.4115.10.1.23
ppCfgMtaFeatureSwitch
MTA Feature Switch activates certain functionality and compliancies in the MTA. hashBypass(1): Disable cfg file Hash checking during provisioning sequence. maxCPEBypa…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4115.10.1.24
ppCfgMtaBatteryReplaceReporting
Determines how the REPLACE BATTERY condition for a TM02DG102 Hardware rev. 6 is reported. Choices are: - Same criteria as for all other battery units (value == 1) - Reports only …
scalarEnumeration.1.3.6.1.4.1.4115.10.1.25
ppCfgNsePayloadType
This object is used to define the payload type used for NSE messages when enabled via setting the bit in the Callp Feature Switch.
scalarInteger32.1.3.6.1.4.1.4115.10.1.26
ppCfgMtaDevSecuritynode-.1.3.6.1.4.1.4115.10.1.29
ppCfgMtaTeleSyslogServIpAddr
The MTA's telephony syslog server IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.3
ppCfgDevHttpnode-.1.3.6.1.4.1.4115.10.1.30
ppCfgMtaTeleSyslogServName
The MTA's telephony syslog server domain name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.4
ppCfgMtaTeleFullyQualName obsolete
MTA fully qualified domain name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.5
ppCfgMtaTeleServProvServIpAddr obsolete
The telephony service provider provisioning server IP address. This object returns 0.0.0.0 if the provisioning server IP address is unknown or unassigned.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.6
ppCfgMtaTeleServProvServName obsolete
The telephony service provider provisioning server domain name. This object returns a (zero-length) string if the provisioning server domain name is unknown or unassigned.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.7
ppCfgMtaTeleServProvDhcpIpAddr obsolete
The telephony service provider DHCP IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.8
ppCfgMtaTeleServProvDhcpName obsolete
The telephony service provider DHCP domain name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.9