ppCfgMtaCallpFeatureSwitch

Callp Feature Switch activates certain functionality
and compliancies in callp. 
WARNING: Changes can result into loss of communication
         to the Callagent or loss of the voicepath.
         Please read documentation before changing!
          
0x00000001 // Transmit piggyback mode if set.
0x00000002 // Allow endpoint to go into lockstep mode.
0x00000004 // Allow endpoint to send MGCP error code messages.
0x00000008 // Reduce the capability descriptor in the SDP to T38 only.
0x00000010 // SDP compliancy if set.
0x00000020 // Use increased DQoS DS Max Traffic Rate if NOT set; otherwise use PacketCable defined value.
0x00000040 // Apply auto OSI to both originating and terminating side for NCS calls (used to be CPFS_COMMENTS - optional comments in NCS messages).
0x00000080 // Don't include the mptime parameter in the sdp if bit is set to 1. Used for older Cisco BTS systems that edited the sdp causing calls to fail. (used to be CPFS_ANYFQDNOK - allow any MTA FQND in NCS message).
0x00000100 // Suppress capability attribute parameters in the SDP if set to 1. 
0x00000200 // OK to transmit wildcarded NCS messages.
0x00000400 // Ignore format-specific SDP attribute lines referring to payload types not listed in media description (m= line).
0x00000800 // Force the use of DQoS.  Reject service if not used (used to be CPFS_DIGIT_MAP - use hard-coded digit map).
0x00001000 // Need to use rfc-2833 rtp messages for Nuera, ie ABCD signalling.
0x00002000 // Don't play local ringback tone once voice is detected for a sendrecv connection.
0x00004000 // If this flag is set then perform DSX DQoS only.
0x00008000 // Allow the endpoint to send provisional responses.
0x00010000 // Enable Payload Header Suppression.
0x00020000 // Disallows multiple connections per line.
0x00040000 // Use increased DQoS Tolerated Grant Jitter (for the Cisco CMTS).
0x00080000 // Need to use rfc-2833 rtp messages LUCENT payload 94.
0x00100000 // Disables RTP and RTCP security.
0x00200000 // Commit both US and DS SFs for connection modes recvonly, sendonly, and replicate when set; for full DQOS this should never be set.
0x00400000 // Allow redirect with no IPsec.
0x00800000 // Add brackets around IP for MTA FQDN when communicating with the call server when bit is enabled (default disabled).
0x01000000 // Send dtmf digits via RFC2833 with payload 101 (enabled if set - default disabled).
0x02000000 // Allow use of provisioned ring cadences (for non NA countries).
0x04000000 // Use hard-coded values for Flash timing (90 - 800 ms).
0x08000000 // Present CID in alternate (non sequential) order.
0x10000000 // Delay DLCX response on a connection that exists on an onhook only line.  This gives the TTM time to process RTP packets in the jitter buffer.  This addresses a VMWI issue at Videotron.
0x20000000 // MTA generates automatic OSI upon deletion of last connection on the line (if set, default off).
0x40000000 // Enable VAD.
0x80000000 // Do not set this bit.  It's used to detect an invalid CPFS setting.  Some provisioning servers will pad the CPFS value with leading 1's!
          
---------- Docsis3.0 ppCfgMtaCallpFeatureSwitch Bit descriptions ----------
          
0x00000001 // Stop piggybacked transmissions of NCS messages
0x00000002 // Prevent endpoint to enter the Lockstep quarantine mode
0x00000004 // If line is not provisioned show OOS rather than IDLE for arrisMtaDevLineCardState.
0x00000008 // Reduce the capability descriptor in the SDP to T38 only.
0x00000010 // NO LONGER USED
0x00000020 // NO LONGER USED
0x00000040 // Apply auto OSI to both originating and terminating side for NCS calls..
0x00000080 // Don't include the mptime parameter in the sdp if bit is set to 1. Used for older Cisco BTS systems that edited the sdp causing calls to fail. (used to be CPFS_ANYFQDNOK - allow any MTA FQND in NCS message)
0x00000100 // Suppress capability attribute parameters in the SDP if set to 1. 
0x00000200 // NO LONGER USED
0x00000400 // Ignore format-specific SDP attribute lines referring to payload types not listed in media description (m= line).
0x00000800 // Reject CRCX or MDCX if no gate ID ever provided. 
0x00001000 // need to use rfc-2833 rtp messages for Nuera, ie ABCD signalling
0x00002000 // NO LONGER USED
0x00004000 // If this flag is set then perform DSX DQoS only.
0x00008000 // Disable endpoint from sending provisional responses. 
0x00010000 // Enable Payload Header Suppression
0x00020000 // NO LONGER USED
0x00040000 // NO LONGER USED
0x00080000 // need to use rfc-2833 rtp messages LUCENT payload 94
0x00100000 // Disables RTP and RTCP security
0x00200000 // NO LONGER USED
0x00400000 // Allow redirect with no IPsec.
0x00800000 // Add brackets around IP for MTA FQDN when communicating with the call server when bit is enabled (default disabled)
0x01000000 // Send dtmf digits via RFC2833 with payload 101 (enabled if set - default disabled)
0x02000000 // NO LONGER USED
0x04000000 // NO LONGER USED
0x08000000 // Present CID in alternate (non sequential) order.
0x10000000 // Delay DLCX response on a connection that exists on an onhook only line.  This give the TTM time to process RTP packets in the jitter buffer.  This addresses a VMWI issue at Videotron.
0x20000000 // MTA generates automatic OSI upon deletion of last connection on the line (if set, default off)
0x40000000 // NO LONGER USED
0x80000000 // Do not set this bit.  It's used to detect an invalid CPFS setting.  Some provisioning servers will pad the CPFS value with leading 1's!

MIB

PACKETPORT-MIB

OID

.1.3.6.1.4.1.4115.10.1.20

Type

scalar

Access

readwrite

Status

current

Parent

ppConfiguration

Siblings

28